BZ 3D Heatbed Spring Leveling Kit Leveling Nut+Hot Bed Spring+M440 Screws for MK3 Heated Bed for Ender 3 / Ender 3 Pro/Ender 5/ CR-10/ CR-10S /CR-10 3D Printers Part

Spring specifications:
Color: Blue/Yellow

Outside diameter:8mm

Inside diameter:4mm

Length :25mm

Packing List:
8 PCS* Hotbed Spring

4 PCS* M4*40 Screws

4 PCS* M4 Nuts

Product Features

  • Auto leveling nuts for 3D printers.
  • High-quality plastic material, durable and sturdy.
  • Easy to install and remove, no tools required.
  • Compatible with Creality CR-10/ CR-10s/ mini Ender 3 3D printers.
  • Note: It’s not suitable for Creality CR-10S4 or S5.

Visit The Website For More Information…

WINSINN 3D Printer Extruder, Works with Creality Ender 3 5 CR10 CR-10 CR-10S Upgraded Aluminum RepRap Prusa i3 for MK8 Drive – Red


►Classic Red color.

►UPGRADE: Perfect replacement for Creality 3D Printers ENDER3, CR-10 Series, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus.

►This extruder feeder drive is compatible with nearly all models of 3D printers. No need to change stepper motors or other mounting hardware.

►Support: 1.75mm Filament .

►This Kit NOT include the instruction manual, we need to DIY 🙂

—————————————————————————————————————

Package include:
►1 x WINSINN CR-10 extruder Upgrade Kit (All Accessories show as Picture 1)

Product Warranty:

-WINSINN are devoted to offer premium quality products to all cherished customers. Meanwhile supply 60 days money back guarantee and 24 months warranty.
-If there are any questions, please feel free to contact us, WINSINN Customer Service Team will spare no efforts to assist with you within 24 hours.

Product Features

  • ✔️Classic Red color.
  • ✔️UPGRADE: Perfect replacement for Creality 3D Printers Ender 3, CR-10 Series, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus.
  • ✔️This extruder feeder drive is compatible with nearly all models of 3D printers. No need to change stepper motors or other mounting hardware.
  • ✔️For 1.75mm Filament. This Kit NOT include the instruction manual, we need to DIY 🙂
  • ✔️Made by WINSINN, make sure the “WINSINN” label on the box for our after-sales service.

Visit The Website For More Information…

BIGTREETECH Direct SKR V1.4 Turbo Control Board + 5pcsTMC2208 V3.0 UART Mode Driver 3D Printer Parts with LPC1769-120MHz Frequency VS SKR V1.3 / V1.4


※5.【TMC2208 V3.0 Manual】:
https://github.com/bigtreetech/BIGTREETECH-TMC2208-V3.0

※BIGTREETECH SKR V1.4/V1.4 Turbo GitHub:
https://github.com/bigtreetech/BIGTREETECH-SKR-V1.3/tree/master/BTT%20SKR%20V1.4

※【SKR Motherboard Parameters】 :
Appearance size: 110*85mm
Mounting size: 102*76mm
Microprocessor: ARM Cortex-M3 CPU
Input voltage: DC12V-DC24V 5A-15A
Logic voltage:DC 3.3V
WIFI module:ESP-01S
Motor driver: Support TMC5161、TMC5160、TMC2209、TMC2225、TMC2208、TMC2130、ST820、LV8729、DRV8825、A4988 etc., independent external motor drive.
Driver working mode support: SPI、UART、STEP/DIR
Motor driver interface:X、Y、Z、E0、E1,5 way(Each has a closed loop drive interface) up to 256 subdivisions
Temperature sensor interface: TH0, TH1, TB, 3 channel 100K NTC Temperature

※BIGTREETECH SKR V1.4 motherboard is a 32-bit 3D printer motherboard optimized and upgraded by the 3D printing team of
Shenzhen Big Tree Technology CO., LTD. for the deficiencies of V1.3 version, especially suitable for small and medium-sized printers.

※1.SKR Motherboard Features: :
1)Plug-in external DC5V power supply module to supply power to TFT screen, BL touch and Neopixel.
2)Equipped with highly modular and open source firmware Marlin2.0, which is convenient for users to DIY and secondary development;
3)More fan interfaces: 1 way CNC fan, 3 way normally open fan;
4)Support 2.4, 2.8, 3.5 inch color touch screen, support LCD2004 screen, LCD12864 screen;
5)Upgrade and configure the firmware through SD card, which is simple, convenient and efficient;
6)The thermistor interface is protected by a bile capacitor pressurized resistor to enhance the resistance of the interface;
7)Support Resume Printing While Power Off, Filament Break Detection,Automatic Shutdown After Printing and so on;
8)High performance MOSFET tube, better heat dissipation effect;

Product Features

  • ※1.【SKR V1.4 Turbo】: Using 32-bit main frequency 120MHz ARM level Cortex-M3 series LPC1768 main control chip, the performance has been greatly improved;
  • ※2.【SKR V1.4 Turbo】: Using dedicated power chip M6130, support 12-24V power input;
  • ※3.【SKR V1.4 Turbo】: Double z-axis interface, eliminating the trouble of external drive expansion module;
  • ※4. 【TMC2208 Ultra-quiet】: Stealth Chop can make the engine work in extreme silence
  • ※5.【TMC2208 V3.0 Features】: Working Mode: Dir Step ##Microplver: 1/256 ##Microplyer Mode: Up to 256 ##Driver Current: Up to 2A ##Input Voltage: 4.75-35VDC ##Logical Voltage: 3.3V-5V ##Decibel: <10dB ##RDSON: ≤0.3Q ##Motor Phase Current: 1.2A RMS, 2.0A Peak

Visit The Website For More Information…

BIGTREETECH Direct T8 Anti Backlash Spring Loaded Nut Pitch 2mm Lead 8mm Elimination Gap Nut for 8mm Acme Threaded Rod Lead Screws DIY CNC 3D Printer Parts (Pack of 4 Lead 8mm)


Specification:
Size: approx. 50mm*22mm*14mm
Pitch:2mm / 0.08″
Lead: 8mm / 0.31″
Lead screw diameter:Approx. 8mm / 0.31″
[Transition: 1cm=10mm=0.39inch]

Feature:
Brand new
Item Type: 3D Printer T8 Anti-Backlash Nut
Application: 3D printer Reprap Z axis, CNC, etc.
Color: Gold
Material: Stainless steel, Brass
Suitable for: 3D printer T8 lead screw

Package included:
4set x T8 anti-backlash spring loaded nut
1 set nut include 2 brass parts and 1 spring

This nut is made from high quality brass and stainless steel for durability and long service life.

Special anti backlash nut, high precision, low cost DIY engraving machine, 3D printer preferred.

It can also be used on home built CNC mill to do wood and plastic projects.

*Made of high quality brass and stainless steel material, more durable.

*Special anti backlash nut, high precision.

*Suitable for Printer machine 8mm diameter. 2mm pitch T8 threaded rod lead screw.

*It can also be used on home built CNC mill to do wood and plastic projects.

Product Features

  • 1.Pitch:2mm / 0.08″ Lead: 8mm / 0.31″
  • 2.Size: approx. 50mm*22mm*14mm
  • 3.T8 Anti-backlash nut for Acme threaded rod.
  • 4.Special anti backlash nut, high precision, low cost DIY engraving machine, 3D printer preferred.
  • 5.Made of high quality brass and stainless steel material, more durable.

Visit The Website For More Information…