CCTREE 10pcs MK8 Extruder Nozzle For 3D Printer Makerbot Creality CR-10 5 Different Size 0.2mm, 0.4mm.0.6mm.0.8mm,1.0mm

Specification:13mm*6mm
Material: Brass of National standard
Weight:2g
Nozzle Precision:0.2mm/0.4mm/0.6mm/0.8mm/1.0mm
Hexagon Diameter:6mm
Screw Thread :M6
Input Diameter: 1.75mm

Package Included:
10x nozzles
Size:0.2mm,0.4mm,0.6mm,0.8mm,1.0mm
Each size 2pcs

Product Features

  • Input Diameter :1.75mm
  • Output Diameter: 0.2mm,0.4mm,0.4mm.0.6mm.0.8mm,1.0mm
  • Material: Copper (Brass)
  • 10Pcs Extruder Brass Nozzle
  • 5 different size (each size 2pcs)

Click Here For More Information

AMOLEN 3D Printer Filament, Temperature Color Change PLA Filament 1.75mm +/- 0.03 mm, 200G(0.44lb), Green to Yellow, includes Sample UV Color Change Filament – 100% USA

Amolen provides higher quality 3D printing materials like PLA(includes silk /marble /bronze/copper/shining /wood PLA/conductive/glow in the dark/temp color change), PETG, flexible TPU and more.

Product Features

  • HIGH COMPATIBILITY – Perfectly compatible with most of the FDM 3D Printer, 1.75mm filament consistent diameter, dimensional accuracy +/- 0.03mm
  • SMOOTHLY PRINT- Orderly wrapped, melt well, feed smoothly and constantly without clogging the nozzle or extruder
  • TEMPERATURE CHANGING COLOR – Under 33ºC it looks green and above that it starts getting yellow
  • PREMIER MATERIAL – Raw materials are from USA, eco-friendly with good performance
  • HIGH PERFORMANCE – Good shaping, no bubble, no jamming, no warping

Click Here For More Information

Heat Bed Mosfet, MACTISICAL 2 Pack 3D Printer Heat Bed Power Module 3D Printer Board Expansion Board MOS Tube High Current Load Module

100% Brand new and Premium Professional Grade MACTISICAL 3D Printer Hot Bed Power Expansion Board .

This module is based on power mosfet and will allow PID control of the heated bed (DC-DC Relays usually do not allow this).

According to the thermal power of the bed, please choose the matching power supply, with sufficient margin. High-Power heated bed is recommended to use 24V power supply,under the same power requirements, the current is smaller than 12V.

Specification
Color: Black, cable length: 6 inch
Net Weight: 75g(approx.)
Size: 2.36″ x 1.97″ x 1.2″ / 60mm x 50mm x 30mm
Mounting Holes: D=3.2MM For M3 Screws.

Notice:
Under the premise of normal cooling, it work stable under I(Max)=25A, the current must not exceed 25A while the process working.

Package Content:
2*Heat bed Power Module with 2 connection cables

Support
Please do not hesitate to contact us if there’s any problem or question about our products. We will keep improving our products and service, and try our best to meet customers’ needs. Thank you for supporting MACTISICAL.

Product Features

  • ★ WELL MADE- New material with superior quality stainless, High-grade Aluminum block for best connectivity and long life.
  • ★ HIGH TRANSMISSION – With this addon module to your 3D printer motherboard you can lead the maximum current up to 25A.
  • ★ MULTIFUNCTION – Completely solve the hot bed power is too large and load current problems,and can well protect the connectors on the controller board from overheating.
  • ★ MEET YOUR NEEDS -Widely used for common 3D printer models,extruder and other open 3D printer motherboards.such as Anet A8, etc.
  • ★ WARNING – For use on some devices (for example,Anet A8),you need to make sure the power supply is set to 110 volts instead of the default 220 volts.If the voltage is too high, the product will get super hot, even charred!! Don’t touch it lightly.

Click Here For More Information

ANYCUBIC Photon UV LCD 3D Printer Assembled Innovation with 2.8” Smart Touch Color Screen Off-line Print 4.53″(L) x 2.56″(W) x 6.1″(H) Printing Size

Worry-free customer service from Anycubic Technology: For any questions you could contact our salesman on Amazon to get full supports. User tutorial video: Technical specification: Operating System:ANYCUBIC Photon Screen: 2.8-inch touch screen Slicer software: ANYCUBIC Photon Slicer Connection: USB Printing: Technology: LCD Light-source: UV integrated light wavelength 405nm) XY DPI: 47um(2560*1440 Z axis resolution: 1.25um Layer resolution: 25 ~ 100um Printing speed: 20mm/h Rated Power: 40W Physical parameter: Printer size: 220mm*200mm*400mm Printing volume: 115mm *65mm *155mm (4.52″*2.56″*6.1″) Printing material: 405nm photosensitive resin N.W: 7.2kgjyhwqqw G.W: 9.5kg Cautions: 1.Avoid direct contact with skin when handling the resin. Flush with plenty of water if contact by accident. 2.Pour resin back from the vat to storage bottle if the printer will not be used for over 2 days. 3.Ensure there is no solid residuals from last print when start new print. 4.Use tissue to clean the vat when change resin. 5.The printed objects can be further hardened under sun-ray or UV-light source. Package content: 1* ANYCUBIC Photon 3D printer 1* Resin *250ml 1* USB memory 3* Rubber Gloves 1* Set of kits 1* Power cord 1* Power supply 1* Scraper 1* Breathing Mask.

Product Features

  • 1. Intelligent: Colorful touch screen equipped with Photon system bring new function.You can pre-view the model in SD card like you saw pictires in Windows OS.Real-time display printing process function is available now.
  • 2. Precision: 2K LCD masking screen. 2560*1440(2k)HD masking LCD gives very fine printring details down to few micrometers
  • 3. UV-LED designed with uniformity and durability: 25W UV light source sit inside stainless steel snoot,equip with 80*80mm heat sink,to offer uniform UV light for long serving time.
  • 4. Speed: Photon slicer brings extraordinary using experience. A 30M stl file will minutes when you use a open-source slicer. While photon Slicer will finish this job wthin 1 minutes.
  • 5. Creative: Developped Resin Vat FEP film is part of maintenance cost in daliy printing. New resin vat was specilly designed for FEP film to adjust the tightness.

Click Here For More Information