- Material: 304 Stainless steel
Do your hands need a break from holding your switch?
Do you want to have a portable arcade stand for the on the go ?
Do you want to create an arcade atmosphere while playing with your friends?
Seen those cool Nintendo Switch Arcade Cabinets people have been making, but don’t have a 3D printer?
This Switch DIY Arcade Cabinet Stand easily gives what you desire,lets you set one up without much hassle and have more fun.
Designed around the details
Assemble hardwood components with rubber band by an installation guide inside the package,a portable DIY Switch Arcade Stand completes.
Precise cut and well design to match your switch,perfectly fit to the Switch air intake vents,easy built-in design make you can play games while charging.
8XPcs hardwood,rubber bands,an installation guide
If you’re interested in DIY,the surface of this Arcade Stand can be used to stick some decals to create your unique one.
Have you ever bought head wear with 3D patterns on it?
Have you ever worn head wear with ultraviolet protection ? Ya, you may wear head wear with ultraviolet protection but 3D effects.
So ? have a try of multi-use head wear with 3D effects ,to feel more real stuffs with you! You will feel pretty cool by wearing our head wear when going out for fishing, hunting, hiking, camping, yard working, motorcycling, skiing, snowboarding.
Pretty cool 3D effects
Traditional head wear patterns looked strength-less and hypo-dynamic, which is bad for wearing stuff! All our magic head wear patterns are printed out by 3D printer instead of traditional machine modeled printing.
You can see the difference if wear it up to your face by comparing the traditional old head wear.All the patterns are full of energy , vitality, and power. Wearing this makes you feel strong!
Great suck up & breath
The multi-use magic head wear is 100% made of Polyester microfiber with soft and comfortable feature, very good in absorbing the sweat and wick moisture away quickly. Cool in summer, Warm in winter, it takes care of you very well in all seasons.
More than 12 ways of wearing
It is definitely valuable to buy a magic head wear with many styles of wearing, it can be used as headband, hear cover,face sun mask, pirate, neck warmer, balaclava, as many styles as you can image. One magic head wear replace all, got it all in one!
This head wear should be washed with water under 30 Celsius degrees and hang it dry in cooler place as much as possible.Do not tear the head wear heavily with your hand
100% promise for money back and replacement
Whenever you are not satisfied with our stuffs,you can replace new one or keep it yourself. We will do the full refund according to your choice ! we strive to make every buyer happy
Details: Dimensions: 60*50mm
Net Weight: 40g
Max Current: 25A(Enhance heat dissipation)
Wire’s color is random
1. Remove basically all ouside screws for your anet a8 control box
2. Take pictures of existing board wiring
3. Unscrew two large 12/14GA wires on the board labeled “hot bed”
4. Screw these two wires into the new mosfet board labled “hot bed”
5. Connect the small jumper wires (white) to the control board where you just removed the two wires and screw them down. Note the polarity on each board. Match (+) to (+) and (-) to (-)
6. FInd 2x 6-8″ pieces of 12 or 14 AWG wire. Most cheap extension cords are 16AWG (too thin). Your local home depot / menards / ace will have this as cut-to-length
7. Run one of the 6″ wires to the power supply (+), screw in; and the other side to the (+) DC IN on the new mosfet board. Repeat for the negative wire (-) to (-)
8. Many people use velcro to secure the new board to the top of the control box. Others print off a holder from thingiverse
9. Put everything back together
10. When complete, you’ll see a blue light activate for signal from inside the box when the bed heater is activated by the control board
1xHot bed MOS Tube Power Module Expansion