GEEETECH 3DPrinter,Wooden Prusa I3 Pro W desktop 3D printer DIY Kit with WIFI Cloud,200x200x180mm(7.9”7.9”7.1”)Printing Size,Support Wi-Fi Connect,EasyPrint 3D App

Product Features

  • 1. Open filament system: ABS/PLA/Flexible PLA/Wood-Polymer
  • 2. Reliable printing quality: layer resolution and tolerance deliver smooth surface finish and durable object structure.
  • 3. Enhanced stability and reliability: 6-mm-thick quality wood plates and its reinforcing structure keep I3 pro W running smoothly.
  • 4. Cloud 3D printing solution: use a Wi-Fi module to enjoy 3D printing untethered. (Note: Wi-Fi module is not included in this kit; you need to buy it separately.)
  • 5.After-sale Service:

Click Here If You Need More Detailed Info…

SIM&NAT 12inch / 30cm 40 Pin Male to Female Dupont Wire, 40 Pin Male to Male, 40 Pin Female to Female Breadboard Jumper wire Ribbon Cables kit for Arduino Raspberry Pi 2 / 3 (120 PCS)

Material:Copper wire
The wires are easy to peel apart and great for making good looking prototypes
soft and flexible

Work on a Raspberry pi breadboard projects, Raspberry pi robot build, Breadboard prototyping, Arduino and ky-040 rotary encoders.
Insert onto the SW LED pin on the typical desktop computer mother board.
Test bread boarding projects or for any breadboard experimenter.
Fit into a 3-pin JST.

Package Included:
1 * 11.8 inch 40 pin male to male Breadboard Jumper Wires
1 * 11.8 inch 40 pin female to female Breadboard Jumper Wires
1 * 11.8 inch 40 pin male to female Breadboard Jumper Wires

Product Features

  • Length: 30cm/11.8 inch
  • The pitch of each end of the wire is 0.1 inch (2.54mm)
  • 40 pin jumper Wire are easy to separate from the ribbon
  • Suitable for Arduino breadboard kit project, PCB project, PC motherboard, DIY experiment, 3D printer and etc.
  • Package content: 1 * 40 pin male to female jumper wires, 1 * 40 pin male to male cable and 1 * 40-pin female to female cable (total 120pcs)

Click Here If You Need More Detailed Info…

Longruner GRBL CNC Shield Expansion Board V3.0 +UNO R3 Board + A4988 Stepper Motor Driver With Heatsink for Arduino Kits (Arduino Kits)

CNC Shield Board: Latest Arduino CNC Shield Version 3.0 GRBL 0.9 compatible 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13) 2 x End stops for each axis (6 in total) Coolant enable Compatible with A4988 or DRV8825 stepper driver Runs on 12-36V DC Arduino UNO R3 Board: MCU: ATmega328 USB interface: ATmega16U2 Operating voltage: 5V Digital I/O pins: 14 (including 6 with PWM capability) Analog input pins: 6 I-I/O pin output current: 40mA max 3.3V output current: 150mA max Flash memory: 32 kB (0.5kB used by bootloader – included) Static RAM (SRAM): 2 kB EEPROM: 1 kB Clock speed: 16MHz A4988 Stepper Motor Driver: A4988 Stepper Motor Driver Board is a breakout board for Allegro’s A4988 DMOS Micro stepping Driver with Translator and Overcurrent Protection; Low RDS (On) Output : Automatic current decay mode detection / selection Mix with slow current decay modes Synchronous rectification for low power dissipation Internal UVLO Crossover-current protection 3.3 and 5 V compatible logic supply Thermal shutdown circuitry Ground fault protection Load short-circuit protection Five selectable step modes: full, 1/2, 1/4, 1/8 and 1/16 Warning: Connecting or disconnecting a stepper motor while the driver is powered can destroy the driver. (More generally, rewiring anything while it is powered is asking for trouble). Package Contents: 1 x CNC Shield Board 1 x UNO R3 Board for Arduino 4 x A4988 Stepper Motor Driver 4 x Heat Sink

Product Features

  • Latest CNC Shield Version 3.0 for Arduino.
  • Arduino UNO R3 Board, MCU: ATmega328, USB interface: ATmega16U2.
  • PWM Spindle and direction pins. 4-Axis support. Runs on 12-36V DC.
  • 2 x End stops for each axis (6 in total).
  • 4Pcs A4988 Stepper Motor Driver with radiator.

Click Here If You Need More Detailed Info…

Elepwal 3D Printer, XY100 Desktop High Precision 3D Printer Kit DIY Self Assembly i3 Acrylic Frame with LCD Display Supported ABS/ PLA/ TPU/ Wood/ HIPS/ PVA/ Nylon Filament for Beginners


100% Brand new and high quality!

International standard,safety and convenience.

2GT wear resisting rubber,aluminium 16 teeth pulley gear.

High precision 0.4mm  0.2mm 0.3mm.

Flexible support,extrusion power adjustable.

High compatibility and super stable performance.



Item Color:black

Item Size:365*340*360mm

Package Size:357*337*152mm

Structure: Acrylic

Print size: 120*140*130mm

Power:100V-240V 5A

Printing support: Secure Digital Memory Card / USB

Layer thickness precision:0.1-0.4mm

Printing speed: 20-150mm/s

Nozzle diameter: 0.4mm  0.2mm 0.3mm

Package Included:

1 X Elepawl 3D Printer

1 X Top Plate

2 X Side Plate

1 X Base Frame Holder(Front&back)

2 X Junction Plate

6 X Sliding Rod Restriction

1 X LCD Display

1 X Screw Pack

4 X Thumb Nuts

4 X Compression Springs

1 X USB Cable

1 X Secure Digital Memory Card

1 X Hexagon Socket Key

1 X Flat Blade Screwdriver

1 X Crosshead Screwdriver

Product Features

  • Elepawl 3D Printer is a great DIY kit to provide you an unforgettable step-by-step learning experience of 3D printer from scratch, alos perfect for kids to excite their potentiality and creativity
  • Equipped with Large Printing Area of 120*140*130mm and nozzle diameter of 0.4/0.2/0.3mm for high precision print, maintain the garage-built feel and the handmade charm
  • XY Axis printing moving speed is 3000mm/s; Z Axis is 200mm/s;The print speed is 40-120mm/s, shortening the time and improve the print effeciency
  • Supported multiple filaments such as PLA, ABS, HIPS, WOOD, PVA, Nylon
  • Suitable for a wide range of customers, young or old, professional or amateur,the best gift to the people who love creating and art

Click Here If You Need More Detailed Info…