3D-Fuel HydroSupport Water Soluble Support 3D Filament 1.75mm 500g Made in USA

3D-Fuel HydroSupportTM Water Soluble Support 3D Filament 1.75mm 500g Made in USA

HydroSupport dissolves completely in water and is much easier to print with than PVA filament. Because it dissolves in water, HydroSupport only needs to be soaked a few hours to easily work supports off by hand, or 12 Ð 24 hours to dissolve completely. The process can be sped up further by using warm water and agitation.

Quality: All 3D-Fuel 3D printer filament is manufactured in our own production facility located in Fargo, North Dakota. We have complete control over the manufacturing process and are able to ensure consistent quality for every spool.

Diameter Tolerance: Variable diameter can cause big problems in your 3D printer. We use a multi-axis laser measurement system to control our filament diameter and ovality in real time during production. Every spool has the diameter and ovality measurements listed right on the box.

All 3D-Fuel filament arrives on a durable plastic reel and is vacuum sealed with a desiccant packet to keep out any moisture. 3D-Fuel filament is compatible with most 3D Printers including MakerbotTM, LulzbotTM, FlashForgeTM, WanhaoTM and many others.

Product Features

  • HydroSupport dissolves completely in water and is much easier to print with than PVA filament. Because it dissolves in water, HydroSupport only needs to be soaked a few hours to easily work supports off by hand, or 12 Ð 24 hours to dissolve completely. The process can be sped up further by using warm water and agitation.
  • Quality: All 3D-Fuel 3D printer filament is manufactured in our own production facility located in Fargo, North Dakota. We have complete control over the manufacturing process and are able to ensure consistent quality for every spool.
  • Diameter Tolerance: Variable diameter can cause big problems in your 3D printer. We use a multi-axis laser measurement system to control our filament diameter and ovality in real time during production. Every spool has the diameter and ovality measurements listed right on the box.
  • All 3D-Fuel filament arrives on a durable plastic reel and is vacuum sealed with a desiccant packet to keep out any moisture. 3D-Fuel filament is compatible with most 3D Printers including MakerbotTM, LulzbotTM, FlashForgeTM, WanhaoTM and many others.

Check Out Our Website For Details…

3D Printing Pen Filament Refills Kit PLA Baisili 1.75mm PLA Filament Bioplastic Made from Corn(12 Colors, 20 Ft each) No Mess, Non-toxic


Safe and non-toxic: Non-offensive odor: BAISILI PLA Filament is a bioplastic made from corn. All its dyes are FDA-approved as food safe and it is guaranteed to have no heavy metals, phthalates, or BPA. It has a roasted-corn smell when printing!
high quality: BAISILI dedicated to provide unique and high quality 3D printing pen filaments. The modified PLA (Polylactic Acid) material that used in our products is developed independently by our own R&D institution.

Specifications:

Material: PLA filament(Polylactic Acid)
PLA extrusion temperature: 374-446℉ (190℃-230℃)
Dimensions: diameter 1.75mm(0.07 inch)
Quantity: 20 feet(6.1m) / color x 12 colors
Total Length: 240 feet
Packing: Vacuum Sealed
This material has no offensive odor and is made of degradable bio-plastic, which is no-harm to your health and environment.

About Our Team
Contact us if you have any problem with the item. We are always here to serve you!

【Get 15% off When Purchase Our 3D Pen】Get 15% off when you purchase our 3D Pen[Baisili 3D PEN].

Product Features

  • • Baisili PLA refills is No Mess, Non-Toxic, No Clog: Baisili PLA refills is made of degradable bio-plastic, which is no-harm to your health and environment.
  • • BAISILI 3D Printing pens Filament compatible with most 3D pens and printers(1.75mm Filament Diameter—Dimensional Accuracy +/- 0.05mm)
  • • 12 Unique Colors 20 Feet Each Color:White, Black, Red, Yellow, Green, Pink, Purple, Blue, Orange, Grey, Brown,Glowing green
  • • Strong-binding and quick-drying compared to other products: you can draw faster! 12 Unique Colors to make your 3D drawing fantastic!
  • • 100% SATISFACTION GUARANTEE – If you’re not satisfied, simply contact us. you will get a good servicean and a full refund.

Check Out Our Website For Details…

KODAK 3D Printing Filament PLA+ (White, 1.75 mm)

PLA+ is an improved version of PLA, suitable for replacing ABS in many aspects. It provides great visual quality and has very low shrinkage and warp. Its high impact resistance is similar to that of ABS and is ideal for high resolution or fast printing. It has fast crystallization, which enables printing without support and with very fine detail. We use Pure grade Ingeo certified resins to ensure the best printing results. Our filament has passed a defined set of tests performed by Nature Works to ensure the product quality and certify its use in food packaging materials.

Product Features

  • Perfect combination of ease of use and strength
  • Main application: concept modeling
  • Filament diameter: 1.75Mm (+/- 0.02Mm)
  • Print temperature: 210-240°c. Print bed temperature (optional): 50-70°c
  • Tips: post-annealing at 80-130°c can be used to promote crystallization and improve the part’s heat deflection temperature

Check Out Our Website For Details…

Hackka 1.75mm 1KG TPU 3D Printing Filament (Yellow) Flexible Filament with Soft Texture

  • Diameter: 1.75mm (±0.02)
  • Weight: Approx. 2.2lb (1kg)
  • Nozzle: At least 0.4mm

Product Features

  • Compatible with all 3D printers, but usually prints better on printers with a direct extruder than with a bowden extruder.
  • Printing Temperature: 190-210 degree Celsius. 200 degree Celsius recommended.
  • TPU materials should be printed slower than PLA. Speed below 30mm/s recommended.
  • Soft and flexible material, similar to NinjaFlex.

Check Out Our Website For Details…