Creality LD002R UV Photocuring LCD 3D Printer with Air Filtering System and 3.5” Smart Touch Color Screen Off-line Print 4.69″(L) x 2.56″(W) x 6.29″(H) Printing Size

LD002R LCD Resin 3D Printer Features:

BUILD AND MOTION:
Great emphasis is being placed on the LD-002R’s robust build quality and the components of its motion system, which is underpinned by a ball screw and single linear rail for the Z-axis.
ANTI-ALIASING:
MSLA 3D printers use an LCD screen to mask an image of a layer over a UV light source. Comprised of hundreds of thousands of pixels, each a little rectangle itself, this tech leaves a telltale sign of the edges of these pixels on the print surface. Often barely visible, this effect can be lessened through the use of a digital processing called anti-aliasing, which interpolates between these edges, smoothing the effect out.
QUICK LEVELING:
Quick leveling in the sense that the machine will lower the print plate to the vat for you, yes the LD-002R is quick leveling. Four hex screws feature on the print plate – loosen them before dropping the plate, and it will align to the level of the screen. Tighten and you’re good to go. Standard MSLA fare.
PERFORATED PRINT PLATE:
Something of an oddity on a small desktop MSLA machine, the Creality LD-002R 3d printer has a perforated print plate. Typically seen on larger bottom-up machines where larger prints present additional pull that might dislodge an improperly adhered print, it’s unusual, and perhaps even distracting overkill, to see it on a smaller machine. It’s not a bad thing, but it makes you wonder why they did it.
AIR FILTER:
A small box at the rear of the print chamber contains a pouch of activated carbon. This should help to remove part of the stench of exposed resin from the air.

Product Features

  • Air Filter: LD002R equipped with air filtering system. There is a small box at the rear of the print chamber containing a pouch of activated carbon, which can help to remove part of the stench of exposed resin from the air.
  • Fast CHITUBOX Slicing Software: LD002R uses the latest version of CHITUBOX Slicing Software which gives you an extraordinary user experience. CHITUBOX takes only 1 minute to slice 30Mb .stl model files while the open-sourced slicing software would take up to 10minutes.
  • Incredible Precision and Resolution: 30W Powerful UV light for fast printing, ensuring 4s per layer. LD002R also uses a 2560×1440 2K HD masking LCD as to provide accurate printing with XY axis resolution of 0.00185inches / 0.047mm.
  • Anti-Aliasing: MSLA 3D printers use an LCD screen to mask an image of a layer over a UV light source. Comprised of hundreds of thousands of pixels, each a little rectangle itself, this tech leaves a telltale sign of the edges of these pixels on the print surface. Often barely visible, this effect can be lessened through the use of a digital processing called anti-aliasing, which interpolates between these edges, smoothing the effect out.
  • Easy to Operate: Easy to set up, easy to choose printing file and view print progress through an user-friendly 3.5” full color touch screen. Level the platform by adjusting 4 hex screws – loosen them before dropping the plate, and it will align to the level of the screen. LD002R allows you to start printing job within 5 minutes after assembly. OFFICIAL SERVICES: Comgrow team provides you lifetime technical assistance and 24 hours professional customer service.

Click Here For More Information

Published by

Best 3D Printer

3D Printing. The next Goldrush is on it´s way. Inside information on how to start printing in 3D, where to buy Printers, how to use them, and the newest Pictures and reviews of available 3D Printers.

2 thoughts on “Creality LD002R UV Photocuring LCD 3D Printer with Air Filtering System and 3.5” Smart Touch Color Screen Off-line Print 4.69″(L) x 2.56″(W) x 6.29″(H) Printing Size”

  1. Unless you read Chinese DO NOT BUY THIS! If you are just learning how to use a 3d printer DO NOT BUY THIS PRINTER! All instructions are in Chinese. This is my first venture into 3d printing and I am just learning. I have wasted more than $200.00 in resin. Because all instructions are in Chinese you have experiment with different settings. Resin for this printer and all 3d printers is EXPENSIVE! Without being able to understand instructions all you can do is experiment with different settings. That translates into hundreds of dollars…

Leave a Reply

Your email address will not be published. Required fields are marked *