E3D V6 Hot End Full Kit, MYSWEETY 3D Printer J-head Hotend with Fan + 5 Pcs Extruder Brass Print Head + 5 Pcs Stainless Steel Nozzle Throat for RepRap 3D Printers

Specification of All Metal V6 Hotend Full kit:
12V/40W heater, the temperature can up to 280°C(Long-term temperature: 240°C/ short-term temperature: 280°C)
12V high speed fan with shroud
One meter long PTFE/teflon tubing 4mm OD 2mm ID
PC4-01 Tube Fitting

Specification of Extruder Tube:
Type : Nozzle Throat
Outer Thread : M6 M7
Nozzle Throat Outer Diameter:6mm
Nozzle Throat Inner Diameter:4mm
Teflon Pipe Inner Diameter : 2mm
Length : 22.5mm
Filament Diameter : 1.75mm
Material : Stainless Steel

Specification of Brass Nozzle:
Type : Extruder Brass Nozzle Print Head
Color: Golden
Material: brass
Input Diameter: 1.75mm
Output Diameter: 0.2mm 0.3mm 0.4mm 0.5mm

Note:
Compatibility:Compatible with all 1.75mm V6 E3D Makerbot 3D printer

Attention: Small parts, keep away from children

Package Included:
1 x All Metal V6 hotend Sets
2 x 0.2mm Nozzle Print Head
2 x 0.3mm Nozzle Print Head
4 x 0.4mm Nozzle Print Head
2 x 0.5mm Nozzle Print Head
5 x 1.75mm Stainless Steel Nozzles Throat

Product Features

  • Package include: All metal v6 j-head hotend full kit + 10 pcs extruder brass nozzle print head + 5 pcs stainless steel nozzle throat.
  • 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality resistance whose temperature can up to 280°C, 12V high speed fan, lose heat quickly.
  • Compatible with all 1.75mm e3d v6 makerbot 3d printer. Nozzle and tube connect seamless, prevent material leaking and blocking.
  • Hotend can be used for both direct feed and bowden applications. Good for ABS, PLA and other conventional print materials.
  • Easy to install, NTC connector with terminal, you can install directly(Hotend is equipped with NTC3950 thermistors).

Click Here If You Need More Detailed Info…

Published by

Best 3D Printer

3D Printing. The next Goldrush is on it´s way. Inside information on how to start printing in 3D, where to buy Printers, how to use them, and the newest Pictures and reviews of available 3D Printers.

3 thoughts on “E3D V6 Hot End Full Kit, MYSWEETY 3D Printer J-head Hotend with Fan + 5 Pcs Extruder Brass Print Head + 5 Pcs Stainless Steel Nozzle Throat for RepRap 3D Printers”

  1. Received this 3D Printer Hot End kit quickly and it … So the description is off a bit… This kit contains 11 nozzles, not 5. The photos are correct, showing 5 long nose, 5 short nose, and one short nose installed, for a total of 11. I love this set because I get a lot of nozzles so I can try different ones when trying to accomplish difficult prints.This kit is great for upgrading a standard Anet A8 extruder to a Bowden type.One caviet is the retaining screw for the thermister (temperature sensor). This screw has a…

  2. The thermistor isn’t glued in, so it came off during a print and my printer (MP Select Mini V2) heated it up so hot that the compression fitting melted.The throats are easy to bend when installing a nozzle.The compression fitting is harder than most to disengage, so installing the Bowden tube to the correct length (so that it fits into the throat) was a nightmare.Clogged terribly during first few prints, perhaps because the Bowden tube wasn’t quite meeting…

Leave a Reply

Your email address will not be published. Required fields are marked *