GEEETECH A10 3D Printer, Fast-Assembled Aluminum Profile DIY kit, with Open Source firmware, High Adhesion Building Platform, Stable Movements on V-Slot Rails, 220×220×260mm Printing Size.

Printing Parameters
Printing technology: FDM
Build volume: 220*220*260 mm
Printing accuracy: 0.1mm
Positioning precision: X/Y:0.011mm. Z: 0.0025mm
Printing speed: 180 mm/s (max)
Filament diameter: 1.75mm
Nozzle diameter: 0.4mm
Filament: ABS / PLA /flexible PLA/wood-polymer/PVA/HIPS/PETG, etc.

Maximum Temperature:
Max temp for hotbed: 100℃
Max temp for extruder: 250℃

Software Resources:
Operating system: Windows, MAC, Linux
Control software: EasyPrint 3D, Repetier-Host, Simplify 3D, Cura, Slic3r, etc.
Remote App: EasyPrint 3D App (with an optional 3D WiFi module)
File format: .STL, G.code

Electrical:
Power supply: Input: 115V/230V, Output: DC 24V, 360W
Connectivity: Wi-Fi (with an optional 3D WiFi module), USB cable, SD card (supports stand-alone printing)
Display screen: LCD 2004

Mechanical:
Frame: Aluminum profile
XY Rods: Wear-resistant aluminum profile
Z axis: Lead screw
Stepper Motors: 1.8°step angle with 1/16 micro- stepping

Physical Dimensions & Weight:
Machine Dimension: 478 x 413 x 485mm
Shipping box Dimension: 500 x 470 x310 mm
Machine Net weight: 7.6kg
Machine Gross weight: 9.45 kg

Product Features

  • Fast assembly: Modulated structure allows it to be installed within 10 minutes. Simple and convenient.
  • Open-sourced control board provides limitless possibilities to adjust your printers and modify firmware on your will.
  • Featuring printing accuracy of 0.1 mm, A10 delivers fine prints with delicate texture, sleek contour and stable structure.
  • High adhesion building platform allows you take down your printing works easier, do not need mask tape and glue stick any more.
  • Quieter and more stable printing movement: The V-shaped wheels and V-slot rails on each axis make the printing quieter, more stable, and more wear-resistant.

Click Here For More Information

Published by

Best 3D Printer

3D Printing. The next Goldrush is on it´s way. Inside information on how to start printing in 3D, where to buy Printers, how to use them, and the newest Pictures and reviews of available 3D Printers.

3 thoughts on “GEEETECH A10 3D Printer, Fast-Assembled Aluminum Profile DIY kit, with Open Source firmware, High Adhesion Building Platform, Stable Movements on V-Slot Rails, 220×220×260mm Printing Size.”

  1. Quality Control My first printer was delivered with a bad 24 volt power supply. Unit turned on for 30 seconds and went dead thereafter. The second printer worked fined on assembly until it was time to extrude. Printer wouldn’t extrude. Contacted Seller and was informed to check the nozzle. Found out the filament was in a new printer clogging the Teflon tubing attached to the extruder. Cleaned out and replaced Telfon tubing only to find out the the Stepper motor for the printer was not working. The…

  2. Awesome printer This is an awesome printer. It comes almost completely assembled, all it takes is about 10 minutes and about 10 screws to finish it. The printer feels quality and prints great. The bed is glass so once it cools, prints come right off and it is easy to clean. The customer service behind the printer is also amazing. The company responds quickly to emails, offers many forms of help, and makes sure you’re completely satisfied with your purchase. If you’re not, they will work with you until you are…

Leave a Reply

Your email address will not be published. Required fields are marked *