eSUN 1.75mm Black PLA PRO (PLA+) 3D Printer Filament 1KG Spool (2.2lbs), Black

eSUN 3D Printer Filament: PLA PRO (PLA+)

Color: Black

Extrusion Temperature Range: 205 to 225

PLA PRO(PLA+) Advantages:

Superb layer bonding
High rigidity. Good glossiness.
Several times tougher than PLA
Smoother finished printouts.
No cracking or brittle problem.
Prints are hard to break.

PLA PRO(PLA+) print temperature is about 20 Celsius higher than regular PLA. Most users print at around 210 to 215 Celsius. Other settings are about the same.

INTSERVO is dedicated to customer satisfaction. Customers are always welcome to contact us for any questions and/or support needs.

Product Features

  • 1KG net (approximately 2.2 lbs) Filament with Clear Spool
  • eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA.
  • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
  • Recommended Extrusion/Nozzle Temperature 205C – 225C
  • Spool Diameter: 8″ – Spool Width: 2.50″ – Spool Hub Hole Diameter: 2.05″ – Inner Circle Diameter: 3.5″

Click Here For More Information

SIMPZIA Heat Bed Power Module General Add-on Hot Bed Power Module Expansion Board High Current Load Module Mos Tube Hotend Replacement with Cables for 3D Printer – 2 Pack

Heated Bed Power Module Features:
Based on powerful MOSFET HA210NO6
Dimensions: 70 x 45mm/ approx 2.76 x 1.77″
Distance between holes: 62.8 x 37.8mm/ approx 2.47 x 1.49″
Supply/Operating Voltage: 12V-50V (12-24VDC recommended)
Max Current: 25A (Enhance heat dissipation) safe for prolonged times. ensure active cooling of the heatsink.
This module is based on power MOSFET and will allow PID control of the heated bed (DC-DC Relays usually do not allow this)

Package Includes:
1 x Heated Bed Power Module.
1 x Connection cable for input signal
2 x Power cable

Note:
This module under the premise of normal cooling, it work stable under (Max) = 25A, the process of using the current not exceed 25A.

Product Features

  • APPLICATION: This high power module is a general add-on heated bed power expansion module for 3D printer. It can work with the Anet A8.
  • UNIQUE DESIGN: With unique snowflake heatsink design, it has a great cooling effect. The heat bed power module can be used in both Lerdge motherboard and other 3D printer motherboards.
  • 25A MAXIMUM CURRENT: This high power module helps your 3D printer equipped with the Lerdge controller board become even more powerful. The module can solve the current load problem when the heated bed power is too large. With this add-on module to board lead the maximum current up to 25A.
  • GOOD PROTECTION: When using heated bed 3D printer for 12V power supply which may cause excessive current during times, with this module, it can well protect the connectors on the controller board from burning.
  • PACKAGE INCLUDES: 2 x Heated bed power module (motherboard is not included) and 2 x Connection cable for input signal. BONUS: 4 x Power cables.

Detailed Information available on our Homepage…

6 items that can help improve your office

Anything you do to improve the lives of your employees will spell greater productivity and happiness around the office. Living in the technology age makes it possible for you to purchase devices for your office that can lead to significant improvements to the way your employees function and to the way your business is done. The following are six must have items for your office that will have you and your employees wondering how you ever operated without them.

An Espresso Machine

Up and until now, the coffee around the office was abysmal. It was mostly instant, and it did not have enough kick to wake up a child. With a brand new espresso machine in the office, you and your employees will be able to face the day with a greater sense of wakefulness. Instead of everyone looking tired and sluggish in the morning, it will only take a few short minutes for you and your staff to gear up to hit the ground running at full steam.

External Battery Packs

Your employees may feel chained to their desks in the worse possible way. It is a common feeling in the modern computer age. By providing external battery packs to your employees, it will help them to be a little more mobile around the office. In fact, it might even be a good idea for them to take their laptop and work outside for about 15-minutes a day in the sun. Getting regular sunlight will help to improve their vitamin D levels and keep the flu rates down in your office. This one enhancement could significantly improve productivity around the office as a result.

Signal Boosters

You are trying to get your smartphone to work inside the office, and you find that, once again, the signal goes dead the moment you move slightly. It is an annoying problem that plagues many offices, but one that can be fixed by installing SureCall signal boosters. Whether you are trying to enhance the quality of your cellular or HD signals, a signal booster can make a huge difference in the quality and reliability of the signal being received inside your office.

A Quality Webcam

If you are a boss who is feeling disconnected from your employees, being shut up in your personal office most of the day, a quality webcam can help to change these feelings of disconnection. With a quality webcam, you will be able to monitor and be a part of office activities by remote. You might even finally catch who is drinking all the good coffee in the morning too.

Pneumatic Adjustable Desks

To keep your employees on their toes, nothing can help quite like a pneumatic adjustable desk. While employees get used to sitting down for hours on end, this sedentary style work situation is simply bad for their health. By installing pneumatic adjustable height desks, your employees can switch between sitting and standing at will. Not only can this help to improve their health, but it can also keep them more wakeful and improve their productivity too.

3D Printers

When time is of the essence, the last thing you want to be stuck doing is ordering a part that will not make it to your office for another two or even three weeks. This can significantly slow operations and productivity. If you had a high quality 3D printer and the digital designs for printing the parts you need, you would not need to wait for weeks on end every time you needed a part to complete an order or project. With a 3D printer, you could just print the parts you need on-site and be good to go in a much shorter amount of time than it would take to order the same part from a distributer.

Conclusion

Now that your office is enhanced with a few additional items it was not outfitted with before, you and your employees are feeling the enjoyment of possessing these must have items. Not only have they improved life around the office for everyone, but your employees are showing their appreciation by working harder than ever before. From their first cup of espresso in the morning to the pneumatic desk that helps them stay awake and alert during that late afternoon slump, you can clearly see that these must have products has made major improvements to your office and to the way your employees engage their work environment.

3D Systems (DDD) Given New $10.00 Price Target at Loop Capital

3D Systems (NYSE:DDD) had its target price lowered by Loop Capital to $10.00 in a research report sent to investors on Thursday, May 3rd. The firm currently has a hold rating on the 3D printing company’s stock.

DDD has been the topic of a number of other research reports. Zacks Investment Research lowered 3D Systems from a hold rating to a sell rating in a research note on Thursday, January 11th. ValuEngine lowered 3D Systems from a sell rating to a strong sell rating in a research note on Monday, April 2nd. Vetr upgraded 3D Systems from a buy rating to a strong-buy rating and set a $12.44 price target on the stock in a research note on Tuesday, January 16th. Piper Jaffray restated a neutral rating on shares of 3D Systems in a research note on Thursday, March 15th. Finally, Stifel Nicolaus raised their price target on 3D Systems from $11.00 to $12.00 and gave the company a hold rating in a research note on Thursday, March 15th. Seven investment analysts have rated the stock with a sell rating, ten have assigned a hold rating, one has issued a buy rating and one has issued a strong buy rating to the stock. The stock has an average rating of Hold and an average price target of $11.74.

Shares of NYSE DDD traded up $0.05 during midday trading on Thursday, reaching $12.67. 1,270,533 shares of the stock traded hands, compared to its average volume of 3,958,843. The company has a market capitalization of $1.44 billion, a P/E ratio of -22.23 and a beta of 1.41. 3D Systems has a one year low of $7.92 and a one year high of $23.19. The company has a debt-to-equity ratio of 0.01, a quick ratio of 1.51 and a current ratio of 2.02.

3D Systems (NYSE:DDD) last issued its quarterly earnings results on Wednesday, May 2nd. The 3D printing company reported ($0.03) earnings per share (EPS) for the quarter, missing analysts’ consensus estimates of $0.01 by ($0.04). 3D Systems had a negative return on equity of 10.41% and a negative net margin of 11.77%. The company had revenue of $166.00 million during the quarter, compared to the consensus estimate of $159.59 million. During the same quarter in the prior year, the business earned $0.06 earnings per share. The firm’s quarterly revenue was up 6.1% compared to the same quarter last year. equities analysts predict that 3D Systems will post -0.2 EPS for the current fiscal year.

In related news, Director G Walter Loewenbaum II purchased 16,475 shares of 3D Systems stock in a transaction that occurred on Monday, May 7th. The stock was bought at an average cost of $10.12 per share, for a total transaction of $166,727.00. The acquisition was disclosed in a document filed with the Securities & Exchange Commission, which is available at this link. 5.00% of the stock is currently owned by company insiders.

Institutional investors have recently bought and sold shares of the company. LPL Financial LLC increased its position in shares of 3D Systems by 18.8% in the fourth quarter. LPL Financial LLC now owns 42,936 shares of the 3D printing company’s stock valued at $371,000 after buying an additional 6,789 shares in the last quarter. Royce & Associates LP purchased a new stake in shares of 3D Systems in the fourth quarter valued at approximately $4,906,000. Schwab Charles Investment Management Inc. increased its position in shares of 3D Systems by 9.4% in the third quarter. Schwab Charles Investment Management Inc. now owns 517,941 shares of the 3D printing company’s stock valued at $6,936,000 after buying an additional 44,686 shares in the last quarter. ArrowMark Colorado Holdings LLC increased its position in shares of 3D Systems by 86.7% during the fourth quarter. ArrowMark Colorado Holdings LLC now owns 5,807,983 shares of the 3D printing company’s stock worth $50,181,000 after purchasing an additional 2,697,683 shares in the last quarter. Finally, Geode Capital Management LLC increased its position in shares of 3D Systems by 4.4% during the fourth quarter. Geode Capital Management LLC now owns 932,185 shares of the 3D printing company’s stock worth $8,054,000 after purchasing an additional 39,645 shares in the last quarter. Institutional investors and hedge funds own 63.14% of the company’s stock.

About 3D Systems

3D Systems Corporation, through its subsidiaries, provides three-dimensional (3D) printing products and services worldwide. The company offers 3D printers, such as stereolithography, selective laser sintering, direct metal printing, multi jet printing, and color jet printers that transform data input generated by 3D design software, CAD software, or other 3D design tools into printed parts under the Accura, DuraForm, LaserForm, CastForm, and VisiJet brand names.

Analyst Recommendations for 3D Systems (NYSE:DDD)

Receive News & Ratings for 3D Systems Daily – Enter your email address below to receive a concise daily summary of the latest news and analysts’ ratings for 3D Systems and related companies with MarketBeat.com’s FREE daily email newsletter.