Wangdd22 15pc/set 1.75mm Teflon Throat Tube+0.4mm Extruder Nozzle Print Heads+Heater Blocks Hotend for MK8 Makerbot Anet A8 3D Printer

Descriptions:
Specification of Brass Nozzle:
Type:0.4mm Extruder Brass Nozzle Print Head
Color:Golden.
Material:Brass
Size:5*13mm
Input Diameter:1.75mm
Output Diameter:0.4mm

Specification of Extruder Tube:
Type:Nozzle Throat
Compatibility:3D Printer
Outer Thread:M6
Nozzle Throat Outer Diameter:7mm
Nozzle Throat Inner Diameter:4mm
Length:30mm
Filament Diameter:1.75mm
Material:Stainless Steel

Specification of Heater Blocks Hotend:
Name:Metal Part
Color:Silver
Specification:20*20*10mm

Package list:
15 piece/set ( 1.75mm Teflon Throat Tubex5pcs,nozzle 0.4mmx5pcs,Heater Blocks Heating Hotendx5pcs)

Product Features

  • Pack of 5 x 3D Printer Extruder Hotend 30mm Length 1.75mm Nozzle Inputting Tube( for MK8 Makerbot Reprap Prusa I3 3D Printer) and 5 x 3D Printer 0.4mm Extruder Brass Nozzle Print Head.
  • Nozzle Throat: Outer Thread – M6; Inner Diameter – 2mm; Length – 30mm; Filament Diameter – 1.75mm; Material – Stainless Steel.
  • 0.4mm Extruder Brass Nozzle Print Head: Color – Golden; Material – copper (brass); Size – 5*13mm; Input Diameter: 1.75mm; Output Diameter: 0.4mm.
  • Compatibility: compatible with all 1.75mm PLA ABS 3D Printer
  • Quanlity:15pcs/lot (5 piece 1.75mm Nozzle Inputting Tube,5 piece 3D Printer 0.4mm Extruder Brass Nozzle Print Head,5 piece Heater Blocks Hotend)

Visit The Website For More Information…

Gizmo Dorks 1.75mm HIPS Filament 1kg / 2.2lb for 3D Printers, White

Gizmo Dorks
We provide the highest quality 3D printing materials such as ABS, PLA, HIPS, PVA, and more. Our filaments are run with tight tolerances. There are no air bubbles or oily residues. Every filament comes loaded on a durable, hard plastic spool, not a cheap, flimsy cardboard spool.

HIPS, High Impact Polystyrene, is very similar to ABS. They share a lot of the same characteristics and qualities. However, HIPS is used with different solvents versus ABS. Limonene is used with HIPS instead of Acetone for ABS. Since Limonene does not affect ABS, HIPS is commonly used as a supporting material. HIPS is versatile, economical, and impact resistant.

Compatible with RepRap, Makerbot, UP!, Lulzbot, Afinia, Solidoodle, MakerGear, Printrbot LC, and more!

FAQ?
Is the spindle hole large enough to fit my Makerbot printer?
Yes! Our spindle holes are large enough to fit the Makerbot printers. You don’t have to worry about fabricating a spindle extension any longer. *NOTE, these spools will not fit inside of the new Makerbot 5th generation printer drawers. You can still use these spools and feed the filament directly through the top of the printer.

What are some printing tips?
Please use Kapton tape or 3M blue tape. Please use in well ventilated areas.

What other colors are available?
HIPS comes in a variety of different vibrant colors, 12 different options total.

Product Features

  • 1.75mm diameter, 1kg net weight, HIPS Filament
  • Filament Roundness: +/- 0.07mm
  • Filament Diameter: +/- 0.05mm
  • Recommended Print Temperature: 210 – 230°C, depending on printer model
  • Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer

Check Out Our Website For Details…

eSUN 1.75mm Black PLA PRO (PLA+) 3D Printer Filament 1KG Spool (2.2lbs), Black

eSUN 3D Printer Filament: PLA PRO (PLA+)

Color: Black

Extrusion Temperature Range: 205 to 225

PLA PRO(PLA+) Advantages:

Superb layer bonding
High rigidity. Good glossiness.
Several times tougher than PLA
Smoother finished printouts.
No cracking or brittle problem.
Prints are hard to break.

PLA PRO(PLA+) print temperature is about 20 Celsius higher than regular PLA. Most users print at around 210 to 215 Celsius. Other settings are about the same.

INTSERVO is dedicated to customer satisfaction. Customers are always welcome to contact us for any questions and/or support needs.

Product Features

  • 1KG net (approximately 2.2 lbs) Filament with Clear Spool
  • eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA.
  • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
  • Recommended Extrusion/Nozzle Temperature 205C – 225C
  • Spool Diameter: 8″ – Spool Width: 2.50″ – Spool Hub Hole Diameter: 2.05″ – Inner Circle Diameter: 3.5″

Click Here For More Information

3D Pen, Zerofire 3D Printing Pen With LCD Screen Display Compatible with PLA ABS Mode Options, Set with 16 Colors 160 Feet 1.75mm Filament Refills for Kids and Adults

Newest Version: Zerofire 3D Printing Pen uses the newest version that brings you better 3D drawing experience, allowing you to make bigger improvements from the old type of 3D pens. The 3D printer pen replaces ink with plastic, which is heated at high temperatures but cools instantly, allowing you to create 3D objects instead of just ideas on paper. You can use the pen to draw in the air, in freehand, on the surface or trace objects on paper.The possibilities are endless and only limited by your imagination.

Features:
Condition: 100% Brand New and High Quality
LCD indicator to check the operating temperature,you can control the temperature and the speed of the filament output.
Extrusion Mode : Fused Deposition Modeling / Melting
Formation: 3D
Voltage: DC 5V 2A
Nozzle Diameter: 0.6mm
Material used :ABS and PLA
Diameter of material :1.75mm
Speed of extrusion: adjustable

Package:
1 x 3D printing pen
1 x Power Adapter
1 x Micro USB cable
1 x Pen holder
1 x 3D Print Removal Tool
16 x 10 ft 1.75mm PLA Filament

Tips:
1, Heating time affected by the setting temperature and environmental temperature.
2, Must cut the material ending to smooth before loading the material
3, Unloading the material after each use is highly recommended

Product Features

  • Great Gift for Kids and Adults: This 3D Pen is suitable for both kids and adults. A perfect gift for children that helps improve their spatial thinking ability and develops creative imaginations. It’s a great way for parents and kids to spend quality time together. Create a colorful world for your family.
  • LCD Screen: Zerofire 3d pen Compatible with PLA and ABS Filament, Support Drawing Speed adjustment, The 3d pen LCD screen shows temperature, speed, filament, which enables you control the temperature and speed when you enjoy drawing 3D model.
  • Easy to Use: The procedure is straightforward. All you need is to plug the pen into a USB port and allow the pen to heat until the status indicator turns from red to green. After that, attach the filament into the hole, and then click on the key control button and you’ll be ready to draw.
  • Drawing Indoor and Outdoor: USB port power supply, can be charged by power bank, computer, laptop. Available to drawing indoor and outdoor . Help you and your kid’s complete a rapidly art creation.
  • Package Content: Come with 16 Colors 16 pcs filament refill, each color 10 feet, and one printing pen, power adapter, micro usb cable, manual, pen holder, Print Removal Tool. One year Warranty, replacement or full refund without return.

Check Out Our Website For Details…