3D printer NTC Thermistor Temp Sensor 100K for Reprap Prusa i3 Comgrow

Package included: 5pcs thermistors
Application : Heated bed or extruder of Reprap Prusa I3 3D Printer
Resistance value at 25°C=100K
Thermistor: small size 1.25mmx2.0mm glass bead
Wiring insulation: high temperature Teflon/PTFE.

Product Features

  • Use for heated bed or extruder
  • It has 2 pin female connector
  • Wire length: 1m/39.4 inches
  • Package include: 5 thermistors
  • Temperature sensor 100KΩ accuracy of ± 1%

Detailed Information available on our Homepage…

CHPOWER 12V 40W 620 Ceramic Cartridge Heater and NTC Thermistor 100K 3950 for 3D Printer Creality CR-10 CR-10S S4 S5 Makerbot RepRap Prusa i3 (Pack of 10)

Cartridge Heater:

● Cartridge heaters is consist of a cylindrical stainless steel tube and thus provide a high corrosion prevention
● The heating wire inside which is wound onto a ceramic core
● The number of coils varies depending on the power, and provide a great uniform distribution of heat, which considerably increases the long life of the heater as well as prevents the oxidation of the heater wire even at high temperatures
● The solids, liquids, and gases need to be heated by cartridge heater, transmit heat quickly by conduction if the producer of the heat (the cartridge) is in direct contact with the heat sink (any solid, liquid, or gas)

Cartridge Heater Application:

● Widely used for manufacturing plastic and rubber parts in the car industry or in the food processing industry, etc
● Semiconductor chamber heating, semiconductor wafer lead connection, semiconductor wire and die bonding
● Freeze protection and deicing of equipment in cold climates or applications ● Humidity Control
● Patient Comfort heating used in medical devices
● Mold die and platen heating
● Seal bars used in packaging equipment
● Test sample heating in gas chromatography

Thermistor Specification

● For 3D printers: use TEMP_SENSOR 11 in Marlin firmware
● Small Size: 1.25mmx2.0mm glass bead
● High accuracy: ±1%
● Resistance value at 25°C=100K
● Wiring insulation: high temperature teflon/PTFE
● Wiring length: 1 meter
● Operating temperature range: -40 ° C … + 300 ° C
● Dissipation power factor: ≥ 5MW / ° C (static air)
● Rated power: 45MW
● Thermal time constant ≤ 7S (static air)
● Temperature Coefficient of Resistance; -2-5% / ° C

Included:

5x 12V Cartridge Heater with 1.0m Wire
5x NTC Thermistor 3950 100k
1x Allen Wrench

Product Features

  • Cartridge Heater Material: 304 Stainless Steel, Voltage: 12V, Power: 40W. Conveniently pre-wired with 1 meter long high temperature Teflon insulated wiring
  • Thermistor Color: White, support for NTC 3950 is included in Marlin firmware, use TEMP_SENSOR 11 in firmware configuration. Temperature sensor 100KΩ accuracy of ± 1%
  • The number of coils varies depending on the power, and provide a great uniform distribution of heat, which considerably increases the long life of the heater as well as prevents the oxidation of the heater wire even at high temperatures .
  • Cartridge heater is consist of a cylindrical stainless steel tube and thus provide a high corrosion prevention.
  • CHPOWER is a TRUSTED VENDOR, we provide 12-month manufacturer warranty on all parts. Buy with confidence.

Detailed Information available on our Homepage…

Anet 3D Printer Parts, 12V 40W 620 1M Ceramic Cartridge Heater and 3950 100K NTC Thermistor for 3D Printer (Pack of 4pcs)

Features of heating tube:
Cartridge heater widely applied for 3D printer, model heating, hot-box & other heating devices.
Voltage: 12V, power: 40W.
Stainless steel material.
The wire length approx. 1 meter.
The stainless steel part, 6mm diameter, 20mm in length.

Specifications of heating tube:
Suitable for: A2/A3/A6/A8 3D Printer etc.
Material: Stainless Steel
Voltage: 12V
Power: 40W
Wire Length: Approx. 1m / 39.4in
Diameter: 6mm
Length: 20mm
Quantity: 2pcs

Features of thermistor:
NTC pre-wired thermistor for most 3D printers heat bed & extruder.
100K ohm temperature sensor.
3P terminal for connecting.
With 1m long high temperature insulated wire.
Durable material for long life.

Specifications of thermistor:
Suitable for: Anet A2/ A3/ A6/ A8/ E10/ E12 3D Printer.
Material: High Temperature Teflon(200°C)
Working Temperature Range: -40°C~+300°C
Resistance: at 25°C=100K ohm
Cable Length: Approx. 1m
Quantity: 2pcs
Package List:
2 * cartridge heater
2 * thermistor
Note:
The item only includes the cartridge heater and thermistor.

Product Features

  • Thermistor: Working Temperature Range: -40°C~+300°C;
  • Resistance: at 25°C=100K ohm;
  • Conviniently pre-wired with 1 meter long high temperature teflon insulated wiring;
  • Cartridge Heater: Material: Stainless Steel; Voltage: 12V; Power: 40W;
  • Use for 3D Printer;

Visit The Website For More Information…

CCTREE NTC 3950 100K Thermistor with 1 Meter Wiring and Female Pin Head for Creality CR-10 Anet A6 A8 RepRap 3D Printer Heatbed or Hot End (Pack of 6)

Thermistor Color : white

Temperature sensor 100KΩ accuracy of ± 1%

Wiring length: 1 meter

Use it with heated bed or extruder

Conviniently pre-wired with 1 meter long high temperature PTFE insulated wiring

Package Included :
6* NTC 3950 100k thermistor

Product Features

  • Thermistor Color : white
  • Temperature sensor 100KΩ accuracy of ± 1%
  • Wiring length: 1 meter
  • Use it with heated bed or extruder
  • Conviniently pre-wired with 1 meter long high temperature PTFE insulated wiring

Visit The Website For More Information…