Gizmo Dorks 1.75mm HIPS Filament 1kg / 2.2lb for 3D Printers, White

Gizmo Dorks
We provide the highest quality 3D printing materials such as ABS, PLA, HIPS, PVA, and more. Our filaments are run with tight tolerances. There are no air bubbles or oily residues. Every filament comes loaded on a durable, hard plastic spool, not a cheap, flimsy cardboard spool.

HIPS, High Impact Polystyrene, is very similar to ABS. They share a lot of the same characteristics and qualities. However, HIPS is used with different solvents versus ABS. Limonene is used with HIPS instead of Acetone for ABS. Since Limonene does not affect ABS, HIPS is commonly used as a supporting material. HIPS is versatile, economical, and impact resistant.

Compatible with RepRap, Makerbot, UP!, Lulzbot, Afinia, Solidoodle, MakerGear, Printrbot LC, and more!

FAQ?
Is the spindle hole large enough to fit my Makerbot printer?
Yes! Our spindle holes are large enough to fit the Makerbot printers. You don’t have to worry about fabricating a spindle extension any longer. *NOTE, these spools will not fit inside of the new Makerbot 5th generation printer drawers. You can still use these spools and feed the filament directly through the top of the printer.

What are some printing tips?
Please use Kapton tape or 3M blue tape. Please use in well ventilated areas.

What other colors are available?
HIPS comes in a variety of different vibrant colors, 12 different options total.

Product Features

  • 1.75mm diameter, 1kg net weight, HIPS Filament
  • Filament Roundness: +/- 0.07mm
  • Filament Diameter: +/- 0.05mm
  • Recommended Print Temperature: 210 – 230°C, depending on printer model
  • Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer

Check Out Our Website For Details…

PolyLite 3D Printer Filament, PETG Filament, 1.75 mm Filament, 1Kg (2.2lb), Transparent Filament


Specifics and Printing Conditions

Color: Transparent

Diameter (Tolerance): 1.75 mm ±0.05 mm

Net Weight: 1 Kg ± 20g

Recommended Printing Temp: 230 – 240 °C

Recommended Printing Speed: 45 mm/s

Heated Bed: 80 °C

All PolyLite PLA filaments have been properly dried before packaging and shipping. It is recommended that the filament, when not used, be stored in the provided resealable bag with the desiccant pack to minimize moisture absorption and to ensure the best printing performance.

About Polymaker

Polymaker is a ISO9001:2008 certified, 3D printing innovation company dedicated to enabling a better future with 3D printing. We achieve this goal by integrating advanced materials, additive manufacturing technologies, and design to meet the needs of today’s industries and consumers.

Product Features

  • Excelent Compatibility: A 1.75 mm PLA filament compatible with Makerbot, FlashForge,Monoprice,XYZprinting,ALUNAR and other popular extrusion based 3D printers (Heated bed required).
  • Wallet Friendly: PolyLite PETG 3D printer filament is a truly plug and play 3D printing material that offers you highest and consistent quality at an affordable price. Only $25 per Kilo but it’s as great as other Polymaker filaments.
  • Easy to Print:Works well with all common printing surfaces such as the blue tape, Kapton tape, glass, BuildTak, etc. No heated bed or 3D printer chamber required but can be used (up to 60°C)
  • Uncompromised Quality: With Polymaker’s eight-step quality control process and rigorous in-house testing, you can rest assured that PolyLite will produce beautiful, reliable and accurate printed parts every time.
  • On Line Support: any questions or problems please leave us a message. A Polymaker engineer will get back to you within 24 hours. Polymaker has worldwide distribution centers located in Europe and North America. All Polymaker filaments are researched, developed and manufactured in house at Polymaker’s Headquarters in China.

Visit The Website For More Information…

Gizmo Dorks 3mm (2.85mm) PLA Filament 1kg / 2.2lb for 3D Printers, Black

Gizmo Dorks
We provide the highest quality 3D printing materials such as ABS, PLA, HIPS, PVA, and more. Our filaments are run with tight tolerances. There are no air bubbles or oily residues. Every filament comes loaded on a durable, hard plastic spool, not a cheap, flimsy cardboard spool.

PLA, Polylactic Acid, is created from processing a number of plant products. PLA can be composted at commercial facilities unlike ABS which is derived from fossil fuels. PLA is a more earth friendly plastic. It is stronger and more rigid than ABS, and in general the printed objects will have a more glossy look and feel compared to ABS. Unlike ABS, PLA can be sanded and machined. PLA has a lower melting temperature compared to ABS. As a material, PLA has much less warping versus ABS. Additionally, a heated bed is not required to print it. PLA generally enjoys sharper details and corners compared to ABS without the risk of cracking or warping. PLA can also be printed at higher throughput speeds.

Compatible with RepRap, Makerbot, UP!, Lulzbot, Afinia, Solidoodle, MakerGear, Printrbot LC, and more!

FAQ?
Is the spindle hole large enough to fit my Makerbot printer?
Yes! Our spindle holes are large enough to fit the Makerbot printers. You don’t have to worry about fabricating a spindle extension any longer. *NOTE, these spools will not fit inside of the new Makerbot 5th generation printer drawers. You can still use these spools and feed the filament directly through the top of the printer.

What other colors are available?
PLA comes in a variety of different vibrant colors, 29 different options total.
*New fluorescent colors are available. They glow under UV light, commonly known as black light.
*New color changing filaments are available; the filaments will change colors at 31°C (88°F). The filament is one color below 31°C, and when it is heated above 31°C, the filament will change to another color.

Product Features

  • 3mm diameter, 1kg net weight, PLA Filament
  • Filament Roundness: +/- 0.07mm
  • Filament Diameter: +/- 0.05mm
  • Recommended Print Temperature: 200 – 210°C, depending on printer model
  • Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer

Check Out Our Website For Details…

Gizmo Dorks 3mm (2.85mm) PLA Filament 1kg / 2.2lb for 3D Printers, Dark Purple

Gizmo Dorks
We provide the highest quality 3D printing materials such as ABS, PLA, HIPS, PVA, and more. Our filaments are run with tight tolerances. There are no air bubbles or oily residues. Every filament comes loaded on a durable, hard plastic spool, not a cheap, flimsy cardboard spool.

PLA, Polylactic Acid, is created from processing a number of plant products. PLA can be composted at commercial facilities unlike ABS which is derived from fossil fuels. PLA is a more earth friendly plastic. It is stronger and more rigid than ABS, and in general the printed objects will have a more glossy look and feel compared to ABS. Unlike ABS, PLA can be sanded and machined. PLA has a lower melting temperature compared to ABS. As a material, PLA has much less warping versus ABS. Additionally, a heated bed is not required to print it. PLA generally enjoys sharper details and corners compared to ABS without the risk of cracking or warping. PLA can also be printed at higher throughput speeds.

Compatible with RepRap, Makerbot, UP!, Lulzbot, Afinia, Solidoodle, MakerGear, Printrbot LC, and more!

FAQ?
Is the spindle hole large enough to fit my Makerbot printer?
Yes! Our spindle holes are large enough to fit the Makerbot printers. You don’t have to worry about fabricating a spindle extension any longer. *NOTE, these spools will not fit inside of the new Makerbot 5th generation printer drawers. You can still use these spools and feed the filament directly through the top of the printer.

What other colors are available?
PLA comes in a variety of different vibrant colors, 29 different options total.
*New fluorescent colors are available. They glow under UV light, commonly known as black light.
*New color changing filaments are available; the filaments will change colors at 31°C (88°F). The filament is one color below 31°C, and when it is heated above 31°C, the filament will change to another color.

Product Features

  • 3mm diameter, 1kg net weight, PLA Filament
  • Filament Roundness: +/- 0.07mm
  • Filament Diameter: +/- 0.05mm
  • Recommended Print Temperature: 200 – 210°C, depending on printer model
  • Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer

Check Out Our Website For Details…