Creality LD002R UV Photocuring LCD 3D Printer with Air Filtering System and 3.5” Smart Touch Color Screen Off-line Print 4.69″(L) x 2.56″(W) x 6.29″(H) Printing Size

LD002R LCD Resin 3D Printer Features:

BUILD AND MOTION:
Great emphasis is being placed on the LD-002R’s robust build quality and the components of its motion system, which is underpinned by a ball screw and single linear rail for the Z-axis.
ANTI-ALIASING:
MSLA 3D printers use an LCD screen to mask an image of a layer over a UV light source. Comprised of hundreds of thousands of pixels, each a little rectangle itself, this tech leaves a telltale sign of the edges of these pixels on the print surface. Often barely visible, this effect can be lessened through the use of a digital processing called anti-aliasing, which interpolates between these edges, smoothing the effect out.
QUICK LEVELING:
Quick leveling in the sense that the machine will lower the print plate to the vat for you, yes the LD-002R is quick leveling. Four hex screws feature on the print plate – loosen them before dropping the plate, and it will align to the level of the screen. Tighten and you’re good to go. Standard MSLA fare.
PERFORATED PRINT PLATE:
Something of an oddity on a small desktop MSLA machine, the Creality LD-002R 3d printer has a perforated print plate. Typically seen on larger bottom-up machines where larger prints present additional pull that might dislodge an improperly adhered print, it’s unusual, and perhaps even distracting overkill, to see it on a smaller machine. It’s not a bad thing, but it makes you wonder why they did it.
AIR FILTER:
A small box at the rear of the print chamber contains a pouch of activated carbon. This should help to remove part of the stench of exposed resin from the air.

Product Features

  • Air Filter: LD002R equipped with air filtering system. There is a small box at the rear of the print chamber containing a pouch of activated carbon, which can help to remove part of the stench of exposed resin from the air.
  • Fast CHITUBOX Slicing Software: LD002R uses the latest version of CHITUBOX Slicing Software which gives you an extraordinary user experience. CHITUBOX takes only 1 minute to slice 30Mb .stl model files while the open-sourced slicing software would take up to 10minutes.
  • Incredible Precision and Resolution: 30W Powerful UV light for fast printing, ensuring 4s per layer. LD002R also uses a 2560×1440 2K HD masking LCD as to provide accurate printing with XY axis resolution of 0.00185inches / 0.047mm.
  • Anti-Aliasing: MSLA 3D printers use an LCD screen to mask an image of a layer over a UV light source. Comprised of hundreds of thousands of pixels, each a little rectangle itself, this tech leaves a telltale sign of the edges of these pixels on the print surface. Often barely visible, this effect can be lessened through the use of a digital processing called anti-aliasing, which interpolates between these edges, smoothing the effect out.
  • Easy to Operate: Easy to set up, easy to choose printing file and view print progress through an user-friendly 3.5” full color touch screen. Level the platform by adjusting 4 hex screws – loosen them before dropping the plate, and it will align to the level of the screen. LD002R allows you to start printing job within 5 minutes after assembly. OFFICIAL SERVICES: Comgrow team provides you lifetime technical assistance and 24 hours professional customer service.

Click Here For More Information

ANYCUBIC Photon UV LCD 3D Printer Assembled Innovation with 2.8” Smart Touch Color Screen Off-line Print 4.53″(L) x 2.56″(W) x 6.1″(H) Printing Size (Photon)

Worry-free customer service from Anycubic Technology:
For any questions you could contact our salesman on Amazon to get full supports.

User tutorial video:
https://youtu.be/bIMwjmVl3Ho

Technical specification:
Operating System:ANYCUBIC Photon
Screen: 2.8-inch touch screen
Slicer software: ANYCUBIC Photon Slicer
Connection: USB

Printing:
Technology: LCD
Light-source: UV integrated light(wavelength 405nm)
XY DPI: 47um(2560*1440
Z axis resolution: 1.25um
Layer resolution: 25 ~ 100um
Printing speed: 20mm/h
Rated Power: 40W

Physical parameter:
Printer size: 220mm*200mm*400mm
Printing volume: 115mm *65mm *155mm (4.52″*2.56″*6.1″)
Printing material: 405nm photosensitive resin
N.W: 7.2kgjyhwqqw
G.W: 9.5kg

Cautions:
1.Avoid direct contact with skin when handling the resin. Flush with plenty of water if contact by accident.
2.Pour resin back from the vat to storage bottle if the printer will not be used for over 2 days.
3.Ensure there is no solid residuals from last print when start new print.
4.Use tissue to clean the vat when change resin.
5.The printed objects can be further hardened under sun-ray or UV-light source.

Package content:
1* ANYCUBIC Photon 3D printer
1* USB memory
3* Rubber Gloves
1* Set of kits
1* Power cord
1* Power supply
1* Scraper
1* Breathing Mask

Product Features

  • ◆EASY TO USE◆:Easy to set up, leveling was a breeze. Software is relatively simple to use. Only 4 settings far fewer settings to adjust vs FDM printer.
  • ◆INCREDIBLE RESOLUTION◆:Make tiny parts with accuracy, much smoother detail and quality than the FDM printer.
  • ◆FAST SHIPPING◆: Multiple models on a build plate don’t add to the build time. A larger miniature takes about 2-3 hours, 6 at once takes the same 2-3 hours.
  • ◆INDUSTRIAL QUALITY◆: All of the faces have a perfect satin finish. Any curves, chamfers, or bevels are are flawless. All of the blue bits and all of the red knobs are anodized.
  • ◆AFTER-SALE SERVICE◆:All ANYCUBIC 3D printers are backed with lifetime technical support;any questions regarding product operation or software please feel free to contact us.

Click Here For More Information

ANYCUBIC Photon UV LCD 3D Printer Assembled Innovation with 2.8” Smart Touch Color Screen Off-line Print 4.53″(L) x 2.56″(W) x 6.1″(H) Printing Size

Worry-free customer service from Anycubic Technology: For any questions you could contact our salesman on Amazon to get full supports. User tutorial video: Technical specification: Operating System:ANYCUBIC Photon Screen: 2.8-inch touch screen Slicer software: ANYCUBIC Photon Slicer Connection: USB Printing: Technology: LCD Light-source: UV integrated light wavelength 405nm) XY DPI: 47um(2560*1440 Z axis resolution: 1.25um Layer resolution: 25 ~ 100um Printing speed: 20mm/h Rated Power: 40W Physical parameter: Printer size: 220mm*200mm*400mm Printing volume: 115mm *65mm *155mm (4.52″*2.56″*6.1″) Printing material: 405nm photosensitive resin N.W: 7.2kgjyhwqqw G.W: 9.5kg Cautions: 1.Avoid direct contact with skin when handling the resin. Flush with plenty of water if contact by accident. 2.Pour resin back from the vat to storage bottle if the printer will not be used for over 2 days. 3.Ensure there is no solid residuals from last print when start new print. 4.Use tissue to clean the vat when change resin. 5.The printed objects can be further hardened under sun-ray or UV-light source. Package content: 1* ANYCUBIC Photon 3D printer 1* Resin *250ml 1* USB memory 3* Rubber Gloves 1* Set of kits 1* Power cord 1* Power supply 1* Scraper 1* Breathing Mask.

Product Features

  • 1. Intelligent: Colorful touch screen equipped with Photon system bring new function.You can pre-view the model in SD card like you saw pictires in Windows OS.Real-time display printing process function is available now.
  • 2. Precision: 2K LCD masking screen. 2560*1440(2k)HD masking LCD gives very fine printring details down to few micrometers
  • 3. UV-LED designed with uniformity and durability: 25W UV light source sit inside stainless steel snoot,equip with 80*80mm heat sink,to offer uniform UV light for long serving time.
  • 4. Speed: Photon slicer brings extraordinary using experience. A 30M stl file will minutes when you use a open-source slicer. While photon Slicer will finish this job wthin 1 minutes.
  • 5. Creative: Developped Resin Vat FEP film is part of maintenance cost in daliy printing. New resin vat was specilly designed for FEP film to adjust the tightness.

Click Here For More Information