Feature of heated bed:
1, the whole board full gold process, the cost is much higher than the spray tin plate!
2, the whole board after optical short circuit, open circuit detection.
3, heating table and aluminum substrate into one, better temperature stability.
4, the new circuit, power supply power stability.
Product resistance: 12V voltage, the resistance of 1.2 ohms
Product voltage: 12V
Product Size: 220mm * 220mm * 3mm hole spacing 214mm
Product process: aluminum plate
Product color: black on the back, front on silver white
Product thickness: 3mm
- Size of hotbed: 220x220mm ( 8.6″ x 8.6″ square)
- Hotbed With Cable Which be Installed Well
- Working temperature: -62～235℃ (suggested )
- Temperature: below 180℃
- WARRANTY: All 3D printer accessories with 12 Months Warranty and Lifetime Technical Support.
Click Here For More Information
If you want to make your printing platform flat enough, ideal stuff is glass sheet. Tempered Silicon glass is rated for higher temperatures than normal sheet glass making it a better material for use as a heated bed. After cracking a few sheets of normal glass from rapidly cooling or heating, tempered glass will quell your frustrations.
* Borosilicate is a very high temperature glass. It has a melt temperature of about 800° C and a very low thermal expansion coefficient.
* Resistant to thermal shock compared to regular glass.
* Prepare a second plate and quickly switchplates when a model finishes printing. This significantly reduces printer idle time between prints.
* Reduces warping, however platform has to be properly leveled as is the case with any platform on a 3D printer.
Material: 100% Borosilicate
1 x 220x220x3mm Borosilicate Glass
- Precisely cut and tempered with high transparence. Resistance to scratch and thermal shock.
- Conducts heat evenly across the build surface to ensure consistent temperature throughout the build surface.
- High binding power when heating. Easy to separate the plastic parts when cooling.
- Get you out of the trouble when plastic film decreased viscosity after a period of usage.
- Specially designed to fit the 3D Printers MK2/MK2A, Anet A8, Anet A6, Ultimaker 2+, Reprap, Mendel.
Visit The Website For More Information…