Screen: Touch Screen
Nozzle Diameter: Standard 0.4mm
Nozzle Number: 1
Bed Temperature: 0-90℃
Support Print Material: ABS，PLA，TPU, etc.
Filament Diameter: 1.75mm
Printing Size: 300x300x400mm/11.8×11.8×15.7inch
Printer Size: 575x465x656mm/22.6×22.6×25.8inch
Enjoy the satisfaction of completing your own DIY 3D printer kit.
Colorful touch screen, status display, function display, parameters all setting are clear to check.
Automatic leveling, easy leveling with both automatic leveling and auxiliary leveling modes.
Double gear extrusion mechanism, has a large extrusion to make sure feeding smoothly
Support filament runs out detection, when the material run out, it will remind you to change new filament.
Package Content:1 x 3D Printer Kit
- Fast Heating & Resume Print Feature: The heated bed can reach its operating temperature in just five minutes. The printer is shielded by its power supply from voltage spikes and power outages. If electrical power is lost, prints can be resumed from the last layer, saving time and reducing waste.
- Semi-assmbled kit: This easy-to-setup kit comes partially assembled, allowing you to learn about the basic construction of Nesaila M18 Pro 3D printers as you finish putting it together. You only need about 1 hours to assemble it.
- Filament Run-out detection : Support filament runs out detection, when the material run out, it will remind you to change new filament, saving you time and money.
- Removable build surface plate: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.
- Aluminum profile and sheet metal as frame structure [simple] [beautiful] [practical], [X] [Y] [Z] axis using rolling pulley, belt and screw transmission structure, this structure print product stability, surface fine, small platform vibration.
Click Here If You Need More Detailed Info…
Printing Technology: FDM (Fused Deposition Molding)
Layer Thickness: 0.1mm to 0.4mm
Nozzle Diameter: 0.4mm, 0.8mm
Compatible Filaments: 1.75mm PLA, Wood, TPU, ABS, PETG and etc.
Heated Bed Temperature: ≤100°C
Nozzle Temperature: ≤250°C
Mode of Operation: Connected to a PC or Off-line with SD card
Compatible Formats: stl, obj, amf
Compatible Software: Cura, Simplify3D
Operating System: Windows XP/Vista/7/10, MAC, Linux
- If you plan to install BL Touch, you can buy BL Touch kits in our store. The auto bed leveling kits from other sellers doesn’t fit on CR-10 V2 3d printer. Upgraded Silent Motherboard: CR-10 V2 has adopted industrial self-developed motherboard backed by TMC2208 ultra silent driver. It demonstrates firm properties as well as reduces noise.
- 24V/350W Meanwell Power Supply: Equipped with solid 24V/350W Meanwell power supply pairs with thermally efficient bed heater. It allows for rapid heating to 100 ℃; BL-Touch Frame and Direct Drive Extruder Reserved.
- Dual Ends Heat Dissipation and All Metal Extruder: CR-10 V2 Equipped with dual ends heat dissipation reduces filament blockage and promotes aperture precision, producing better prints. All Metal Extruding unit stable in feeding filaments and wear-resisting.
- Golden Triangle Remarkably Stable Structure and Resume Printing Enabled: Innovative diagonal draw bar structure forms a firm golden triangle that effectively reduces errors caused by vibrations. If a power outage occurs, it follows the unfinished printing instructions.
- What You Get: Creality CR-10 V2 3D Printer and lifetime technical support. Comgrow is always stand behind what we sell to our customers. Professional after-sales team is on your side.
Click Here For More Information
Print technology: Fused Deposition Modeling
Build Volume: 300 x 300 x 400mm
Printing Precision: 0.05mm
Positioning precision: 12.5 ¦Ìm / 12.5¦Ìm / 2.5¦Ìm
Nozzle diameter: 0.4mm
Printing Speed: 40-145mm/s
Supported Software: Repetier-Host, Cura, Simplify 3D, Slicer PE, etc
Print file types support: Gco, gcode
Supported OS: Windows / Mac / Linux
Nozzle temperature: Max 260¡æ
Heat bed temperature: Max 110¡æ
AC Input: 100-240V
DC Output: 24V/16A
Connectivity: USB connector or stand-alone SD card printing
Desktop space: 510*415*625mm
Shipping dimension: 660 x 580 x 256mm
Shipping weight: 16kg
Average operational noise: 49dBA
1 x 3D printer Thinker
1 x tool kit
1 x 8 GB SD card and USB card reader
1 x 10 meters test filament
1 x Diagonal pliers
1 x Power cable
1 x USB cable
2 x PC4-M6 fittings
1 x X-axis belt
1 x filament holder
1 x 0.4mm nozzle
1 x ejector pin
- Super quiet: Eryone 2560 Mother Board with TMC2208 V1.2 stepper motor driver and quite fans.
- Maflex: magnetic and flexible PEI printing surface, easy stick to heat bed and remove from heat bed, for more detail, please see Eryone maflex.
- Large volume and high quality: The printing volume is 300*300*400mm, with carefully-selected components. After 3 steps assembly, the printer can print pretty well, almost no need to calibrate.
- Power failure resume feature: Built-in supercapacitor and circuit designing, the mainboard will store the height value of Z-axis when the power off. When the power system resume, the printer can resume the print.
- Compatible with Auto-leveling sensors: With pre-designed interface for BL-touch and proximity switch, update Eryone Thinker S firmware to enable the auto-leveling function is easily.
Click Here For More Information