- Model: NTC 3950.
- Length: 120cm/3.9ft.
- Thermistor: 100K ohm.
- Suitable for: pre wiring thermistor for RepRap 3D printer extruder or heating bed.
- Here is 24-hour service, if you have any problem, please feel free to contact us.
● Cartridge heaters is consist of a cylindrical stainless steel tube and thus provide a high corrosion prevention
● The heating wire inside which is wound onto a ceramic core
● The number of coils varies depending on the power, and provide a great uniform distribution of heat, which considerably increases the long life of the heater as well as prevents the oxidation of the heater wire even at high temperatures
● The solids, liquids, and gases need to be heated by cartridge heater, transmit heat quickly by conduction if the producer of the heat (the cartridge) is in direct contact with the heat sink (any solid, liquid, or gas)
Cartridge Heater Application:
● Widely used for manufacturing plastic and rubber parts in the car industry or in the food processing industry, etc
● Semiconductor chamber heating, semiconductor wafer lead connection, semiconductor wire and die bonding
● Freeze protection and deicing of equipment in cold climates or applications ● Humidity Control
● Patient Comfort heating used in medical devices
● Mold die and platen heating
● Seal bars used in packaging equipment
● Test sample heating in gas chromatography
● For 3D printers: use TEMP_SENSOR 11 in Marlin firmware
● Small Size: 1.25mmx2.0mm glass bead
● High accuracy: ±1%
● Resistance value at 25°C=100K
● Wiring insulation: high temperature teflon/PTFE
● Wiring length: 1 meter
● Operating temperature range: -40 ° C … + 300 ° C
● Dissipation power factor: ≥ 5MW / ° C (static air)
● Rated power: 45MW
● Thermal time constant ≤ 7S (static air)
● Temperature Coefficient of Resistance; -2-5% / ° C
5x 12V Cartridge Heater with 1.0m Wire
5x NTC Thermistor 3950 100k
1x Allen Wrench
Features of heating tube:
Cartridge heater widely applied for 3D printer, model heating, hot-box & other heating devices.
Voltage: 12V, power: 40W.
Stainless steel material.
The wire length approx. 1 meter.
The stainless steel part, 6mm diameter, 20mm in length.
Specifications of heating tube:
Suitable for: A2/A3/A6/A8 3D Printer etc.
Material: Stainless Steel
Wire Length: Approx. 1m / 39.4in
Features of thermistor:
NTC pre-wired thermistor for most 3D printers heat bed & extruder.
100K ohm temperature sensor.
3P terminal for connecting.
With 1m long high temperature insulated wire.
Durable material for long life.
Specifications of thermistor:
Suitable for: Anet A2/ A3/ A6/ A8/ E10/ E12 3D Printer.
Material: High Temperature Teflon(200°C)
Working Temperature Range: -40°C~+300°C
Resistance: at 25°C=100K ohm
Cable Length: Approx. 1m
2 * cartridge heater
2 * thermistor
The item only includes the cartridge heater and thermistor.
Temperature sensor 100KΩ accuracy of ± 1%
Wiring length: 1 meter
Use it with heated bed or extruder
Conviniently pre-wired with 1 meter long high temperature PTFE insulated wiring
Package Included :
6* NTC 3950 100k thermistor