Aokin 5Pcs 3D Printer Dual Z Stepper Motor Parallel Module with 100mm Cables,for Dual Double Z Axis Dual Z Stepping Motors, for Reprap Prusa Lerdge 3D Printer Board 3D Printer Parts and Accessories

Feature:
Name: 3D Printer Dual Z Stepper Motor Parallel Module
Size: 25mm*15mm
Cable Length: 100cm

Package :
5pcs Dual z stepper motor parallel modules
5pcs Cables

Product Features

  • Design – New Dual Z Stepper Motor Adapter Parallel Module Diverter Expanding Flow Board Diffuser Splitter.
  • Application – Special designed for 3D printer stepper motor-side parallel, a driver drives two motors, put them in-line (series) with the motor.
  • Module Size – 25mm*15mm; Cable Length: 100mm; Weight: 5g,Comes with a 4 pin cable (4 inch), easy to connect.
  • Note – Only for mini printers or small current motors in parallel (with the same motor in parallel, the current are divided evenly).
  • Pakage List – 5pcs dual z stepper motor parallel modules and 5pcs cables, easy to operate.

Visit The Website For More Information…

STEPPERONLINE 5PCS Nema 17 Stepper Motor 1.5A 12V 45Ncm (63.74oz.in) 4-Lead 39mm Body W/ 1m Cable and Connector for DIY CNC/ 3D Printer/Extruder

This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x39mm. It has 4 wires, each phase draws current 1.5A, with holding torque 45Ncm (63.74oz.in).

Electrical Specification

*Manufacturer Part Number: 17HS15-1504S-X1
*Motor Type: Bipolar Stepper
*Step Angle: 1.8 deg
*Holding Torque: 45Ncm(63.74oz.in)
*Rated Current/phase: 1.50A
*Phase Resistance: 2.3ohms
*Inductance: 4.4mH ± 20%(1KHz)

Physical Specification
*Frame Size: 42 x 42mm
*Body Length: 39mm
*Shaft Diameter: Φ5mm
*Shaft Length: 24mm
*D-cut Length: 15mm
*Number of Leads: 4
*Lead Length: 1000mm
*Weight: 280g

Connection

Black(A+), Green(A-), Red(B+), Blue(B-)

Warning:

Make sure the motor connect to a constant current or chopper drive controller before you test motor.
Connecting the motor directly to a power supply will destroy the motor.

Product Features

  • 5 PCS, High torque Low noise
  • Nema 17 stepper motor with step angle 1.8deg
  • Holding Torque: 45Ncm(63.74oz.in), 12-24 VDC
  • Rated Current/phase: 1.50A & Phase Resistance: 2.3ohms
  • Build with 1m Pin Connector

Visit The Website For More Information…

BZ 3D A4988 Stepstick Stepper Motor Driver Module  with Heat Sink for 3D Printer Controller Ramps 1.4 MKS Gen L SKR V1.3 Board for 3D Printer Part(Pack of 5pcs)

-Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay) 
-Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection 
-Automatic current decay mode detection / selection 
-Internal UVLO
  -Mixed with slow current decay modes 
-Synchronous rectification for low power dissipation 
-Crossover-current protection 
-Thermal shutdown circuitry 
-3.3 and 5 V compatible logic supply 
-Thermal shutdown circuitry 
-Ground Fault Circuit 
-Load short-circuit protection 
-Of five optional step mode: full, 1/2, 1/4, 1/8 and 1/16

Chip upgrade Using the latest high-quality chips, higher compatibility and better conductivity.(It is believed that only high quality products can ensure the quality of your work and bring safety to your work.)

Product Features

  • Compared with ordinary A4988, our high quality A4988 drive production process is improved again by PCB gold plate process (gold-plated pin) SMT placement machine manufacturing, non-manual welding, higher yield and more stable performance.
  • Performance upgrade: PCB covering copper process upgrade to 2oz (our high-quality copper thickness 70um, ordinary 35um), higher copper content, better heat dissipation performance.
  • Under 2A current, it can work for a long time. It is very suitable for 3D Printer, Mendel, Huxley and other machines.
  • Using the latest chips, higher compatibility and better conductivity
  • Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage toachieve higher step rates.

Visit The Website For More Information…

Onyehn 22pcs/Lots A8&A2 3D Printer Part Each 5PCS 0.4mm Extruder Nozzle Print Head+1.75mm Teflon Throat Tube+Heater Blocks Hotend for MK8 Makerbot Reprap

5x 3D Printer Nozzle Throat Tube 5x Nozzle Print Heads 5x Heater Blocks Hotend 5x M6 nuts 2x Hex Key Wrenches (for MK8 Makerbot Reprap Prusa I3 3D Printer) Compatibility: compatible with all 1.75mm PLA ABS 3D printer

Product features:
Type: Nozzle Throat
Compatibility: 3D Printer
Outer Thread: M6
Nozzle Throat Outer Diameter: 7mm
Nozzle Throat Inner Diameter: 4mm
Teflon Pipe Inner Diameter: 2mm
Length: 30mm
Filament Diameter: 1.75mm
Material – Stainless Steel

Specification of Brass Nozzle:
Type: 0.4mm Extruder Brass Nozzle Print Head
Color: Golden
Material: copper (brass)
Size: 5*13mm
Input Diameter: 1.75mm
Output Diameter: 0.4mm

Specification of Heater Blocks Hotend:
Name:Metal Part
Color:Silver
Specification:20*20*10mm

Specification of Hex Key Wrench:
Quantity: 2 Pack
Diameter: 1.5mm and 2mm
Shape: hex

Package Including:
5 x 3D Printer heating block
5 x 3D Printer 30mm length 1.75mm Nozzle Inputting Tube( for MK8 Makerbot Reprap Prusa I3 3D Printer)
5 x 3D Printer 0.4mm Extruder Brass Nozzle Print Head
5 x M6 nuts
2 x Hex Key Wrenches
Only the above package content, other products are not included

Product Features

  • Pack of 5 x 3D Printer Extruder Hotend 30mm Length 1.75mm Nozzle Inputting Tube( for MK8 Makerbot Reprap Prusa I3 3D Printer) and 5 x 3D Printer 0.4mm Extruder Brass Nozzle Print Head. Gift 5pcs M6 nuts and 2 hex wrenches
  • 0.4mm Extruder Brass Nozzle Print Head: Color – Golden; Material – copper (brass); Size – 5*13mm; Input Diameter: 1.75mm; Output Diameter: 0.4mm.
  • Nozzle Throat: Outer Thread – M6; Inner Diameter – 2mm; Length – 30mm; Filament Diameter – 1.75mm; Material – Stainless Steel.
  • Compatibility: compatible with all 1.75mm PLA ABS 3D Printer
  • Quantity:22pcs/lot (5x 3D Printer Nozzle Throat Tube 5x Nozzle Print Heads 5x Heater Blocks Hotend 5x M6 nuts 2x Hex Key Wrenches (for MK8 Makerbot Reprap Prusa I3 3D Printer))

Visit The Website For More Information…