Taidda 3D Printer Accessories BL-Touch, 3D Printer Accessories BL-Touch for Creality CR-10/Ender-3 Adapter Plate Board with Bracket

Features:
1. 100% brand new and high quality.
2. Made of high quality materials, durable to use.
3. Fine workmanship makes sure good performance.
4. Easy and convenient to use.
5. Suitable for Creality Ender-3/CR-10 3D Printer.

Specification:
PIN 27 board pin: brown ground, red -5V, yellow / orange signal
Color: shown as picture    
Material: metal + plastic

Package List:
1 * Link Cable
2 * Adapter Plate
1 * Recorder
4 * Screw
1 * Cable
1 * Bracket
2 * Cable Tie

Product Features

  • 100% brand new and high quality.
  • Made of high quality materials, durable to use.
  • Fine workmanship makes sure good performance.
  • Easy and convenient to use.
  • Suitable for Creality Ender-3/CR-10 3D Printer.

Detailed Information available on our Homepage…

Calorbot 3D Printer Resin Filter, 3D Printer Accessories Photosensitive Resin Filter Funnel Combination Light Curing Consumable Filter,Resin Filter Cup+Silicon Funnel Disposable for Anycubic/ELEGOO

Calorbot 3D Printer Parts, Silicone Foldable Funnels+Stainless Steel Resin Filter for Pouring Resin Back Into Bottle for ANYCUBIC Photon Sparkmaker Kelant Orbeat D100.

Funnel
Material: silicone
Color: random
Width Top: 75mm
Width Bottom: 15mm
Height: 100mm
Type: Foldable

Filter
Material: stainless steel
TopDiameter: 60mm
Bottom Diameter: >27mm and <60mm
Height: 34mm

Note
After use rinse the filter in IPA to clean it.
Package List
1 * filter
1 * silicone funnel (random color)

Warranty:We are Confident about 3D Solar Turntable quality,Within 24 hours response,100% Satisfaction Guarantee.

Product Features

  • Silicone funnel + metal filter mesh. (funnel color random).
  • Funnel adopts high quality silicone as raw material, soft and pliable, healthy and eco-friendly, collapsible design, compact and convenient.
  • Filter is made of stainless steel, easy to use and clean, effectively filter impurities while pouring resin back into the bottle.
  • Silicone funnel is used to pour resin back into a bottle, fit all kind of bottle ( the max width of the bottle neck is 15mm).
  • Useful accessory for 3D printing.For better using effect, use the stainless steel filter matching with foldable funnel.

Detailed Information available on our Homepage…

BCZAMD 12V 50W Upgraded Ceramic Cartridge Heater Wire 1M 3D Printer Accessories Heating Tube 620mm for Reprap Prusa Mendel i3 MK3 MK10 Maker Select V2 3D Printer Parts V6 Hotend J-head Extruders, 3Pcs

After-sales guarantee: each defective item can be replacement for free or refund. If any question, please feel free to contact or QA us, we will try our best to service you

Specification
Voltage: 12V
Power: 50W
Heating head size: 6 x 20mm
Heating head material: 304 stainless steel
Line length: 39inch /1M
Line thick: 0.5 mm?2; (The cross section of the copper wire inside the heater is 0.5mm?2;)
Color: as shown in the picture
Working Temperature: < 350 degrees

Single-end heating tube use instructions:
1.The effective heating part of the single-end heating tube must be kept dry.
2.The electrical joint of the single-ended heating pipe should be placed outside the insulation layer and the heating chamber. The working voltage should not exceed 10% of its rated value, and the casing should be effectively grounded.
3.The working environment of the electric heating element, the temperature is not more than 95 degrees, no explosive, corrosive gas.
4.The electric heating element should be stored in a dry place and should not be damp.

Package listing:
3 x 12V 50W Ceramic Cartridge Heater

Product Features

  • Apply to Creality CR-10S Pro, CR-X, Ender 3, Ender 3X, Ender-3 Pro, Anet A8, Maker Select V2.1, Monoprice v2, Wanhao Duplicator 3D Printer, V6 Volcano MK8 MK9 MK10 Extruder/Hotend etc.
  • The improvement compared to ordinary red heating tube:
  • 1.From the original ordinary 0.3-line high-temperature line to 0.5-line thick white high-temperature line, can bear higher temperature, and looks more beautiful.
  • 2.From the original 40W power to 50W, the maximum temperature increases from 300-31℃ to 340-350℃. Can be used with the new HT-NTC100K temperature thermistor.
  • 3.The new version heater used in all imported skills, the use of 304 stainless steel, with the internal use of 2080 nickel chrome wire to achieve maximum service life.

Visit The Website For More Information…

Sunhokey 3D Printer Nozzle Cleaning Kit,0.4mm 0.3mm 0.2mm Needles, and Tweezer Tool Kit, Filament Clog Cleaner Accessories Part Drill Bits (Black-3D Printer Nozzle Cleaning Kit)


Welcome to Our Sunhokey Store! Now let’s start a smooth 3D printing journey.

Our 3D Printer Nozzle Cleaning Drill Bits: It Supports 0.4mm /0.3/0.2mm Nozzle FDM 3D Printers in Market Very Well, They are flexible, Won’t break, Twist Easily,Very Easy to Clean Your 3D Printer Nozzles and Other Small Parts.

The cleaning tool kit includes:
10pcs 0.4mm Silver Color Stainless Steel Needles
5pcs 0.3mm Silver Color Stainless Steel Needles
5pcs 0.2mm Silver Color Stainless Steel Needles
1pc of Anti-Static, Non-Magnetic Curved Precision Tweezer
1pc of Anti-Static, Non-Magnetic Straight Precision Tweezer
1pc of cleaning brush
15pc of Nylon cable tie

Package: All of Above Items Packed in One Good Protect Handy Plastic tube, which Easy to Use and Stock

Note: Pls Clean 3D Filament when the Nozzle is Hot.

Customer Service: We truly care for our customers. If you have any questions or concerns, please contact us and we will do everything in our power to ensure your full satisfaction.

Product Features

  • Great value:2pcs sharp quality tweezers and 3 sizes Stainless steel nozzle cleaning needles(10pcs 0.4mm,5pcs 0.3mm,5pcs 0.2mm) ,15pcs Nylon cable tie and 1pcs Mini cleaning brush all packed in one safe container.
  • High quality: Stainless steel needle, they are flexible, won’t break, twist easily.great for nozzle maintenance, cleaning up extruder hot-ends and cleaning excess support material (PLA/ABS filament).Anti-Static precision tweezers great for nozzle maintenance and cleaning excess material.
  • Widely Compatible: Suitable for all 0.4mm/0.3mm/0.2mm 3D printer nozzle in the market, professional of cleaning up the 3D printer extruder hot-ends and cleaning excess 3D printer filament.also great for the general maintenance of the heatsink section.
  • Good Package: It’s packed by one transparent plastic box, which easies to carry and stock.
  • Factory Guarantee: Quality assurance,the set is a great tool for 3D printers.

Detailed Information available on our Homepage…