CCTREE 48CM TF to Micro SD TF Extension Cable Memory Card Adapter for/Raspberry Pi/Arduino GPS TV SDXC Creality CR10,CR-10 V2,10S,Ender 2,Ender 3,Ender 3 Pro,Ender 5 Monoprice Select Mini 3D Printer

Product feature:

Length:48CM.

Type: TF To Micro SD Card Adapter Extension

Compatible with GPS, DVD, DVR, LED/LCD screen, or mobile phone Smartphone,Creality Series 3D Printer

Read and write speed will not affect

Note:This Extension cable don’t contain the Micro SD Card

Package including:
1 X TF To Micro SD Card Adapter Extension

Product Features

  • The SD connection Cable is available long enough for most projects
  • Type: TF To Micro SD Card Adapter Extension
  • Compatible with GPS, DVD, DVR, LED/LCD screen, or mobile phone Smartphone,Creality Series 3D Printer
  • Read and write speed will not affect
  • Note:This Extension cable don’t contain the Micro SD Card

Visit The Website For More Information…

Taidda 3D Printer Accessories BL-Touch, 3D Printer Accessories BL-Touch for Creality CR-10/Ender-3 Adapter Plate Board with Bracket

Features:
1. 100% brand new and high quality.
2. Made of high quality materials, durable to use.
3. Fine workmanship makes sure good performance.
4. Easy and convenient to use.
5. Suitable for Creality Ender-3/CR-10 3D Printer.

Specification:
PIN 27 board pin: brown ground, red -5V, yellow / orange signal
Color: shown as picture    
Material: metal + plastic

Package List:
1 * Link Cable
2 * Adapter Plate
1 * Recorder
4 * Screw
1 * Cable
1 * Bracket
2 * Cable Tie

Product Features

  • 100% brand new and high quality.
  • Made of high quality materials, durable to use.
  • Fine workmanship makes sure good performance.
  • Easy and convenient to use.
  • Suitable for Creality Ender-3/CR-10 3D Printer.

Detailed Information available on our Homepage…

XLX 1220Pcs 2.54mm JST-XHP 2/3/4/5/6/7/8/9 Pin housing (and Pin Pedestal Housing) Kit and Male/Female Pin Header Terminals Connector Adapter Plug Set


Feature :

(01) Material : PVC , Metal

(02) Type : JST-XHP

(03) Pin Pitch : 2.54mm

Package Including :

XHP Housing : 160pcs

(01) 2 Pin ———- 20pcs

(02) 3 Pin ———- 20pcs

(03) 4 Pin ———- 20pcs

(04) 5 Pin ———- 20pcs

(05) 6 Pin ———- 20pcs

(06) 7 Pin ———- 20pcs

(07) 8 Pin ———- 20pcs

(08) 9 Pin ———- 20pcs

Pin Pedestal Housing : 160pcs

(09) 2 Pin ———- 20pcs

(10) 3 Pin ———- 20pcs

(11) 4 Pin ———- 20pcs

(12) 5 Pin ———- 20pcs

(13) 6 Pin ———- 20pcs

(14) 7 Pin ———- 20pcs

(15) 8 Pin ———- 20pcs

(16) 9 Pin ———- 20pcs

Terminal : 900pcs

(17) Female Pin Connector ———- 450pcs

(18) Male Pin Connector ————— 450pcs

Packing Quantity:1220pcs with plastic box High quality: Adopt environmental protection materials, cold and high temperature resistance, conductive, durable. widely used in electrical appliances, automobiles, robots, lighting, toys, PCB control panel, speakers, audio, batteries, toys, household appliances, etc.

Product Features

  • 1.Pin Pitch : 2.54mm
  • 2.Material : PVC , Metal
  • 3. Pin : 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9
  • 4. Quantity : 1220pcs with plastic box
  • 5. Type : JST-XHP

Click Here If You Need More Detailed Info…

Aokin 3D Printer Controller Kit for Arduino RepRap, RAMPS 1.4 + Mega 2560 Board + 5pcs A4988 Stepper Motor Driver with Heatsink + LCD 12864 Graphic Smart Display with Adapter

Product Specs:

(1) Mega 2560 R3
(2) 3D Printer Controller RAMPS 1.4 It is designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduino-compatible Mega with the powerful Arduino-compatible MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an Arduino-compatible MEGA shield for easy service, part replacement, upgrade-ability and expansion.
(3) A4988 Stepper Motor Driver
A4988 is a complete microstepping motor driver with built-in translator for easy operation
(4) LCD 12864 Graphic Smart Display Controller
This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display. You can easy connect it to your Ramps board using the “smart adapter” included.
Update High Quality Ramp Board by changing MOSFET: old MOSFET IC Model : PDF55N06 Specification£ºVDSS:60V ID:55A New MOSFET IC model: HM60N06 Specification£ºVDSS:60V ID:60A HM60N06 current up to 60A£¬More safety

Package List:

(1) RAMPS 1.4 x 1
(2) Mega 2560 R3 x 1
(3) A4988 Stepper Motor Driver with Heatsink x 5
(4) LCD 12864 Graphic Smart Display Controller x 1
(5) Smart Adapter x 1
(6) Cable x 2
(7) USB Cable x 1

Detailed tutorials including project introduction and source code CAN BE PROVIDED FOR FREE,contact us BY Email to get documents.

Note:
1. You just need to connect the computer with Mega 2560 via USB download cable when burning firmware.
2.The chip and circuit may be burnt when the power and motor driver board reversed, so please confirm twice before powering.
3.You just need to power Ramps 1.4 when testing.If you power Mega 2560, the chip will be burnt easily. So please read the introduction carefully and avoid the board being burnt due to the wrong operation.

Product Features

  • Mega 2560 control board: The board is a microcontroller board based on the ATmega2560-16AU .It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
  • RAMPS 1.4: RAMPS interfaces an Arduino Mega with the powerful Arduino MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an Arduino MEGA shield for easy service, part replacement, upgrade-ability and expansion. Additionally, a number of Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack.
  • LCD 12864 with Controller: This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display. You can easy connect it to your Ramps board using the “smart adapter” included.
  • A4988 driver module: A4988 Stepper Motor Driver Board is a breakout board for Allegro¡¯s A4988 DMOS Microstepping Driver with Translator and Overcurrent Protection; please read the A4988 datasheet carefullybefore using this product.
  • Warning: Connecting or disconnecting a stepper motor while the driver is powered can destroy the driver. (More generally, rewiring anything while it is powered isasking for trouble.)

Click Here If You Need More Detailed Info…