EcubMaker TOYDIY 4-in-1 3D Printer FDM Laser CNC Dual-FDM with Auto Leveling,Heated (180 x 180 x 180mm) Build Plate,PLA

Specifications:

➤Model: EcubMaker TOYDIY 4in1 3D Printer

➤Molding Volume:180mm*180mm*180mm

➤Forming Accuracy:±0.1mm

➤Layer thickness:0.05mm-0.4mm

➤Positioning Accuracy:Z Axis2.5um,XY Axis 11um

➤Plate Function:Automatic Leveling,Heating and Separable Plate Tore move Models

➤Onnection Mode:USB,SD Card

➤Operating System:WINXP/VISTA7/8/10

➤Power Supply: 110-220V Wide Voltage Power 120W,50HZ-60HZ

➤Data Format: Input STL/OBJ;Output Gcode

➤When you receive the EcubMaker TOYDIY 3D printer, please refer to the video content in the instruction manual/SD card and take steps out of the box.

➤After receiving the machine, first test that FDM printing is normal. Print with the PLA filament inside the box to ensure that the machine can working properly

➤Due to TOYDIY 3D Printer’s power supply and the design of the open structure, TOYDIY’s base plate can only be heated to 50 ℃. So the ABS filament printing is prone to bottom warping. Do not use TPU and soft material printing, will greatly increase the probability of the FDM Toolhead plug!

➤Warning:The FDM Toolhead and FDM-Dual Toolhead contain heating elements.Do not touch the nozzle directly by your hands to avoid acald.After printing,let TOYDIY cool down to indoor temperature before cleaning.

➤Warning:Laser Toolhead contains Laser deevice.Make sure your wear Safety Glasses when using it. Do not observe the laser directly without Safety Glasses.

➤Warning:CNC Toolhead contains high-speed motor,violation operation may cause damage to graver,make sure you wear Safety Glasses when using it.

➤Warning:When inspecting the machine,please pull out the plug at first,and make sure it has been powered off before checking.

➤Warning:Do not move the axis by hand directly,otherwise the driver chip on the motherboard will be burnt.

Product Features

  • TOYDIY has FDM 3D printing, Dual-color 3D printing, CNC engraving and laser engraving four functions. TOYDIY has three Toolhead that can be quickly replaced in 30 seconds. TOYDIY’s FDM Toolhead supports both FDM Printing and FDM-Dual Printing. FDM Toolhead using the remote extruder filament mode, the maximum temperature can reach 240℃. And it’s a totally assemble free machine.
  • TOYDIY’s Laser toolhead uses a purple laser with 1500mw of electrical power, can laser engraving on wood, plastic, leather, cardboard and other shells. And also able process color and gray scale pictures. Laser toolhead unable to cut materials.
  • The CNC Toolhead uses a 385 DC Motor with speed of 8000-10000 RPM, sculpting depth 0.4mm, can carve wood, Chevrolet plates, plastics, acrylic and other non-metallic materials. The machining model should not exceed 3 hours, otherwise it will affect the tool life.
  • EcubWare only supports the 64-bit operating system above win7, and doesn’t support Apple MAC system for the time being.4-in-1 slicing software: All tasks for 4 functions can be done with our EcubWare, and first-time users can get started very easily. EcubWare regularly updates new features to continuously upgrade, you can download it from our official website.
  • There are some useful tutorial videos will be attached in the SD card about how to print FDM/Laser/CNC. If you have any problems with your TOYDIY 4in1 3D printer, your Printer will be repaired or replaced during the warranty period. Feel free to email (or Facebook messages) to contact our support team.

Click Here For More Information

Aibecy TRONXY XY-2 Pro 3D Printer Kit Fast Assembly 255x255x260mm Build Volume Support Auto Leveling Resume Print Filament Run Out Detection with 8G TF Card & PLA Sample Filament 250g

Features:
Support filament run out detection, timely remind filament shortage or cut-off filament.
High quality auto leveling sensor, ensure hot bed leveling, improve printing accuracy.
Double fans extruder head, better cooling effect, more stable printing, longer service life.
Durable black sticker, easier to remove the model and don’t be afraid to scratch the surface.
Max.255*255*260mm printing size, support various 1.75mm printing filaments like PLA, HIPS, WOOD, PC, PVC and more.
Widely used in toy, architecture, furniture, education, medical, daily necessities and other fields.

Specifications:
Brand Name: TRONXY
Model: XY-2 PRO
Plug: US
Power Supply: 110V/220V 360W
Structure: Aluminum Profile
Print Size: 255*255*260mm(Max)
Layer Thickness: 0.1-0.3mm
LCD Screen: Support
Printing Support: TF card/USB
Print Speed: 20-100mm/s
XY Axis Positioning Accuracy: 0.0125mm
Z Axis Positioning Accuracy: 0.02mm
Nozzle Diameter: 0.4mm(Default)
Nozzle Temperature: ≤275℃
Heatbed: Included
Printing Material: PLA, HIPS, WOOD, PC, PVC and more
Material Diameter: 1.75mm
Screen: 3.5 Full Color Touchscreen
Software Language: English,Chinese
File Format Printing: STL,G-code
Operating System: XP,WIN7,MAC
Host Computer Software: Repetier-Host,Cura
Environmental Requirement: 8-40℃, Humidity: 20-80%
Connectivity (Interface): USB, LCD display and SD card reader
Machine Dimension: 46.0 * 45.5 * 52.0cm / 18.1 * 17.9 * 20.5in
Machine Weight: 8.5kg / 18.7lbs
Package Dimension: 52.0 * 49.0 * 25.0cm / 20.5 * 19.3 * 9.8in
Package Weight: 12kg / 26.5lbs

Package List:
1 * 3D Printer Kit
 

Product Features

  • After sales service: Dear customer, we will provide you with lifetime technical support. If you have any questions, you can contact the seller by email on amazon, we will reply you within 24 hours (except holidays), and Provide you with a solution.
  • With 3.5 inches full color touchscreen , easy to understand and operate.
  • Printer has resume printing function, when the power is restored, the printer will continue to print from the interruption point.
  • Support filament run out detection, timely remind filament shortage or cut-off filament.
  • High quality auto leveling sensor, ensure hot bed leveling, improve printing accuracy.

Click Here If You Need More Detailed Info…

Creality 3D Upgraded BLTouch V1 Auto Bed Leveling Sensor Kit Accessories for Creality 3D Ender 3/Ender 3 Pro,Ender 5, CR-10/10 S4/10 S5, CR 10S, CR 20/20 Pro

NOTE:
The circuit wiring of CR-10 S4, CR-10 S5, CR 20, CR20 Pro are different from the manual, while Ender 3,Ender 3 Pro,Ender 5, CR-10 are same as the manual.
1. Use USB cable to connect CR-10 S4, CR-10 S5, CR 20, CR20 Pro with computer to flash the firmware, the ISP connector and ISP pinboard are not needed.
2. No need to plug the pinboard A to mainboard of CR-10 S4, CR-10 S5, CR 20, CR20 Pro, just insert the connectors into the mainboard D11 pins and unplug Z limit switch then insert the connectors into the Z port.

Features:
An auto leveling sensor for 3D Printer based on open-source
Simple, high-quality, smart and precise

Item type:Auto Press Bed Leveling Kit
Material: Plastic
Color: As pictures.

Packing Includes:
1 set of auto bed Leveling Kit

Firmware:
Please move to the Creality Official Website to download.

Notes:
1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures.
2. Please allow 1-3cm measuring deviation due to manual measurement.
If the BL touch doesn’t work well. you can reference the website: www.antclabs.com/wiring3

After sale service and technical support
If you have any issue, please kindly contact us. We will reply as soon as possible within 24 hours.
We will offer you professional customer support and strive our best to offer your solutions.

Product Features

  • Application: Suitable for Ender 3/Ender 3 Pro,Ender 5, CR-10/10 S4/10 S5, CR 10S, CR 20/20 Pro (can’t use for CR 10S Pro). It is an auto leveling sensor for 3D Printer based on open-source.
  • IMPORTANT NOTE:Flash the firmware before install, and the circuit wiring of CR-10 S4, CR-10 S5, CR 20, CR20 Pro are different from the manual(please check the product image to see detail). Please visit the Creality Official Website to download firmware.
  • Easy to Use: This auto bed leveling sensor make it easier to leveling the hot bed, which can precisely measure the tilt of Bed surface. Bed leveling is not a problem anymore.
  • Intelligence, self – check and alarm. Function of auto leveling is adopted to make it easier to use and to increase the success rate of shaping.
  • Package includes: 1 set of auto bed Leveling Kit (as image shows). If you have any question about this product, please feel free to contact us. We will respond within 24 hours and offer professional technical support to you.

Click Here If You Need More Detailed Info…

FLSUN QQ-S Pre-Assembled Delta 3D Printer Printing Size Φ255X360mm Lattice Glass Platform Auto Leveling Touch Screen Titan extruder

FLSUN-QQ-S2 3D Printer configuration :

﹥ Build Volume (L X W X H): φ255X 360 mm
﹥ Maximum layer resolution: 0.1-0.4 mm
﹥ Recomended layer resolution: 0.2-0.3mm
﹥ Printing speed: 20-150 mm/seg
﹥ Recomended speed: 50mm/s
﹥ Filament Diameter: 1.75 mm
﹥ Nozzle Diameter: 0.4 mm
﹥ XY Positioning Precision: 0.012mm
﹥ Z Positioning Precision: 0.004mm
﹥ EXtrusion temperature: 240-260°C
﹥ Recoemnded use temperature: 250°C
﹥ Operation Temperature: 5-37°C
﹥ Product Dimensions: 370X 370X 780mm
﹥ Shipping Box: 850X 480 X 150 mm
﹥ Product Weight: 14 kg
﹥ Shipping Weight: 14.5KG
﹥ Power: 360W
﹥ Input Voltage: AC 100-240V
﹥ Power output: DC 24V 15A
﹥ Filament Material: PLA ABS
﹥ Printer Case: Aluminium
﹥ Monitor Screen:Touch screen 3.2 inch
﹥ Steeper Motors: Nema17
﹥ Print Technology: FDM (Fused Deposition Modeling)
﹥ Supported File Type: STL,G-code, OBJ
﹥ Operating System: Windows XP/7/8,Mac OS
﹥ Connectivity: USB, SD card
﹥ Software: Cura,Repetier-host
﹥ Language: English
﹥ Included Gift: 2 Gb Micro SD card /extra spare nozzle,a roll pla filament Tools

About shipping:
① Modular packaging,scientific packaging design, each part will be carefully protected to ensure safe arrival.

About feedback:
FLSUN Quality Assurance/Technical Assistance:email directly or Skype(FLSUN_Zhang) Sun through Fri 18pm-9am PST(time difference):
Customers will experience hands-on fun, we supply detailed instruction and videos in the sd card
But we can’t make sure that customers won’t meet any challenge during assembly, so please contact us
Any damage of parts can be replaced for free during 1st year
We can supply first printing online guidance if you need

Product Features

  • φ255X360mm printing size
  • Noise below 50 dB
  • The power source have both 110v and 220v, please make sure power supply is correct setting
  • New auto leveling system

Click Here For More Information