Laliva 3D Printer – DC 12V Soil Moisture Sensor Relay Control Module Automatic Watering of The Humidity Starting Switch

Product Details
12V soil moisture sensor controller module Lower humidity start automatic watering
Humidity is below the set humidity start means that when soil moisture is below the set humidity , the relay will automatically pull, start spraying , water pumps , etc. do humidifying action reaches the set humidity is automatically stopped.
Purpose:
Adjustable via potentiometer control soil moisture threshold , which can automatically vegetable garden , garden automatic watering , household pots of soil moisture control , electronic game , etc., with a power relay , can control high current devices , less than the set humidity automatically start relay , more than the set humidity automatically disconnected , and a delay function to resolve without delay the humidity critical state relay flickered question is a simple and practical soil moisture control system.
Product Descriptions:
1 using the company\’s high-quality soil to make the soil moisture sensor detection surface is nickel plated, has widened sensing area can improve conductivity, prevent rust easily contact with soil problems and prolong life .
(2) products can be controlled over a wide range of soil moisture , adjustable via potentiometer control the corresponding threshold , the humidity is below the set value, the relay starts , higher than the set value, the relay is switched off .
3 product with a delay function , delay 3-5 seconds , when the humidity in the critical condition is detected , the relay does not flicker , flicker occurs .
4 high-quality products using Songle relay can withstand the load of 1500W , meet the requirements of most people .
5 products with a power indicator and relay instructions .
Electrical parameters:
Supply voltage : 12VDC Input current : more than 100ma
Load : 250V 10A AC or DC 30V 10A (below a current of this range can be used)
Module for use:
1 soil moisture sensor for detection .
2 modul

Product Features

  • 1 using the company\’s high-quality soil to make the soil moisture sensor detection surface is nickel plated, has widened sensing area can improve conductivity, prevent rust easily contact with soil problems and prolong life .
  • (2) products can be controlled over a wide range of soil moisture , adjustable via potentiometer control the corresponding threshold , the humidity is below the set value, the relay starts , higher than the set value, the relay is switched off .
  • 3 product with a delay function , delay 3-5 seconds , when the humidity in the critical condition is detected , the relay does not flicker , flicker occurs .
  • 4 high-quality products using Songle relay can withstand the load of 1500W , meet the requirements of most people .
  • 5 products with a power indicator and relay instructions .

Click Here For More Information

Automatic Leveling Module,3D Printer Part Automatic Leveling Module Film Pressure Probe Type Auto-leveling Sensor(Suitable for Makerbot nozzles)

Specifications:
Compatible nozzle(Optional): For Makerbot, for Ultimaker, for MK8, for E3D/ E3DV6 Weight:12g  Signal line: 1m/39.37inch
Related instructions:

Auto Leveling Parameters Description:
X-axis direction offset: the offset of the leveling probe relative to the print nozzle in the X-axis direction
Y-axis direction offset: the offset of the leveling probe relative to the printing nozzle in the Y-axis direction
Z-axis direction offset: the distance from the platform to the print head when the leveling probe detects the platform
Probe stowed angle: the angle of the servo for the leveling probe when the probe is stowed/retracted/up (can ignore this when not in use)
Probe open angle: the angle of the servo for the leveling probe when the probe is
deployed/down (can ignore this when not in use)
Number of leveling points: The number of probe points that probe on the plane. The actual number of detected points is equal to the square of the set value. For example, if set to 4 points, 16 points are actually detected, and the maximum is 9, namely 81 points.
Probe trigger mode: Set the level state when the leveling probe is triggered.
Package Included:
1 x Auto-leveling module  1 x 1 meter signal line
Note: Do not use the leveling sensor when the nozzle temperature is higher than 45degrees!!!

Product Features

  • EASY TO BE USED:Easy to be used. Can be applied to different types of 3D printers. The default trigger distance is 0.1mm
  • HIGH PRECISION:High precision, leveling repeatability can be ± 0.05mm
  • THE AVERAGE SERVICE LIFE:The average service life of the module is more than 500,000 times
  • COMPATIBLE :Compatible with almost all the 3D printer motherboards in the current market
  • GOOD ANTI-INTERFERENCE ABILITY:Good anti-interference ability, will not be affected by the platform material, ambient light, ambient temperature and humidity, etc

Visit The Website For More Information…

3D Printer Accessories Automatic Leveling Module Film Pressure Probe Type Auto-leveling Sensor for E3D V6 MK8 Makerbot Nozzles(For Makerbot Nozzle)

SPECIFICATIONS:
Compatible nozzle(Optional): For Makerbot, for Ultimaker, for MK8, for E3D/ E3DV6
Weight: 12g
Signal line: 1m/39.37inch

AUTO LEVELING PARAMETERS DESCRIPTION:
1. X-axis direction offset: the offset of the leveling probe relative to the print nozzle in the X-axis direction
2. Y-axis direction offset: the offset of the leveling probe relative to the printing nozzle in the Y-axis direction
3. Z-axis direction offset: the distance from the platform to the print head when the leveling probe detects the platform
4. Probe stowed angle: the angle of the servo for the leveling probe when the probe is stowed/retracted/up (can ignore this when not in use)
5. Probe open angle: the angle of the servo for the leveling probe when the probe is deployed/down (can ignore this when not in use)
6. Number of leveling points: The number of probe points that probe on the plane. The actual number of detected points is equal to the square of the set value. For example, if set to 4 points, 16 points are actually detected, and the maximum is 9, namely 81 points.
7. Probe trigger mode: Set the level state when the leveling probe is triggered.

PACKAGE INCLUDED:
1 x Auto-leveling module
1 x 1 meter signal line

NOTE:
Do not use the leveling sensor when the nozzle temperature is higher than 45 degrees!!!

Product Features

  • Easy to install, can be applied to different types of 3D printers. Plug and play, the default trigger distance is 0.1mm
  • High precision, leveling adjust accuracy can be up to +/- 0.05mm
  • The average service life of the module is more than 500,000 times
  • Compatible with almost all the 3D printer motherboards in the current market
  • Good anti-interference ability, will not be affected by the platform material, ambient light, ambient temperature and humidity, etc

Detailed Information available on our Homepage…

3D Nail Printers Portable Painting Machine Automatic Mobile Wireless Transfer Digital All-intelligent Nail Printers Accessories (INK)

Description
100% brand new & high quality
we have videos to help you how to use it ,if you want ,pls contact us.

Pre-print #2 (PP):Before painting, you need to brush on the nail painted with colored glue to make the painted pattern clear
NM COAT :Brush on the edge of the nail to avoid ink painting on the skin when painted (Peel Off Anti-overflow Nail )
TS (TOP COAT):For nails, after painting the pattern, keep the painted pattern lasting and glossy
BS( BASE COAT):Nail coloring machine dedicated color glue, as the background color of the painted pattern
Include: 3Pcs Printer ink

Product Features

  • 3D Nail Printers Portable Nail Printer Painting Machine Accessories
  • Automatic Mobile Wireless Transfer Digital All-intelligent Nail Printers
  • A Nail Art Equipment that Prints Any Pattern,Any Color, and Any Design on Natural Nails and Nail Tips.
  • Free teaching how to paint on gel nail high quality.
  • Nail Art enrich your beautiful life!

Detailed Information available on our Homepage…