Taidda 3D Printer Accessories BL-Touch, 3D Printer Accessories BL-Touch for Creality CR-10/Ender-3 Adapter Plate Board with Bracket

Features:
1. 100% brand new and high quality.
2. Made of high quality materials, durable to use.
3. Fine workmanship makes sure good performance.
4. Easy and convenient to use.
5. Suitable for Creality Ender-3/CR-10 3D Printer.

Specification:
PIN 27 board pin: brown ground, red -5V, yellow / orange signal
Color: shown as picture    
Material: metal + plastic

Package List:
1 * Link Cable
2 * Adapter Plate
1 * Recorder
4 * Screw
1 * Cable
1 * Bracket
2 * Cable Tie

Product Features

  • 100% brand new and high quality.
  • Made of high quality materials, durable to use.
  • Fine workmanship makes sure good performance.
  • Easy and convenient to use.
  • Suitable for Creality Ender-3/CR-10 3D Printer.

Detailed Information available on our Homepage…

Creality 3D Upgraded BLTouch V1 Auto Bed Leveling Sensor Kit Accessories for Creality 3D Ender 3/Ender 3 Pro,Ender 5, CR-10/10 S4/10 S5, CR 10S, CR 20/20 Pro

NOTE:
The circuit wiring of CR-10 S4, CR-10 S5, CR 20, CR20 Pro are different from the manual, while Ender 3,Ender 3 Pro,Ender 5, CR-10 are same as the manual.
1. Use USB cable to connect CR-10 S4, CR-10 S5, CR 20, CR20 Pro with computer to flash the firmware, the ISP connector and ISP pinboard are not needed.
2. No need to plug the pinboard A to mainboard of CR-10 S4, CR-10 S5, CR 20, CR20 Pro, just insert the connectors into the mainboard D11 pins and unplug Z limit switch then insert the connectors into the Z port.

Features:
An auto leveling sensor for 3D Printer based on open-source
Simple, high-quality, smart and precise

Item type:Auto Press Bed Leveling Kit
Material: Plastic
Color: As pictures.

Packing Includes:
1 set of auto bed Leveling Kit

Firmware:
Please move to the Creality Official Website to download.

Notes:
1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures.
2. Please allow 1-3cm measuring deviation due to manual measurement.
If the BL touch doesn’t work well. you can reference the website: www.antclabs.com/wiring3

After sale service and technical support
If you have any issue, please kindly contact us. We will reply as soon as possible within 24 hours.
We will offer you professional customer support and strive our best to offer your solutions.

Product Features

  • Application: Suitable for Ender 3/Ender 3 Pro,Ender 5, CR-10/10 S4/10 S5, CR 10S, CR 20/20 Pro (can’t use for CR 10S Pro). It is an auto leveling sensor for 3D Printer based on open-source.
  • IMPORTANT NOTE:Flash the firmware before install, and the circuit wiring of CR-10 S4, CR-10 S5, CR 20, CR20 Pro are different from the manual(please check the product image to see detail). Please visit the Creality Official Website to download firmware.
  • Easy to Use: This auto bed leveling sensor make it easier to leveling the hot bed, which can precisely measure the tilt of Bed surface. Bed leveling is not a problem anymore.
  • Intelligence, self – check and alarm. Function of auto leveling is adopted to make it easier to use and to increase the success rate of shaping.
  • Package includes: 1 set of auto bed Leveling Kit (as image shows). If you have any question about this product, please feel free to contact us. We will respond within 24 hours and offer professional technical support to you.

Click Here If You Need More Detailed Info…

Creality 3D Upgraded BLTouch V1 Auto Bed Leveling Sensor Kit Accessories for Creality 3D Ender 3/ Ender 3 Pro/Ender 5/CR -10/CR-10S/CR-10S4/S5/CR20/20Pro

NOTE:
The circuit wiring of CR-10 S4, CR-10 S5, CR 20, CR20 Pro are different from the manual, while Ender 3,Ender 3 Pro,Ender 5, CR-10 are same as the manual.
1. Use USB cable to connect CR-10 S4, CR-10 S5, CR 20, CR20 Pro with computer to flash the firmware, the ISP connector and ISP pinboard are not needed.
2. No need to plug the pinboard A to mainboard of CR-10 S4, CR-10 S5, CR 20, CR20 Pro, just insert the connectors into the mainboard D11 pins and unplug Z limit switch then insert the connectors into the Z port.

Features:
An auto leveling sensor for 3D Printer based on open-source.
Simple, high-quality, smart and precise.
Used for 3D Printer for CR-10/for CR-10SPRO/ENDER-3,

Item type:Auto Press Bed Leveling Kit
Material: Plastic
Color: As pictures.

Packing includes:
1 set of Leveling Kit

Notes:
1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
2. Please allow 1-3cm measuring deviation due to manual measurement.

Note:
If the BL touch doesn’t work well. you can reference the website: www.antclabs.com/wiring3

Product Features

  • Application: Suitable for Ender-3 / Ender-3s / Ender-3 Pro /Ender 5 /CR-10 / CR-10S/ CR 10S4/ CR 10S5/ CR-20 / CR-20 Pro and so on 3D Printer(Note: Please flash the firmware first, with ISP cable to connetct computer and printer while CR 10Scan be connected directly to computer by USB)
  • Easy to Use: This auto bed leveling sensor make it easier to levelling the hot bed, which can precisely measure the tilt of Bed surface. Bed leveling is not a problem anymore.
  • Intelligence, self – check and alarm. Function of auto leveling is adopted to make it easier to use and to increase the success rate of shaping.
  • Firmware:Please move to the Creality Official Website to download: https://creality3d.cn/products/
  • Packing includes: 1 set of auto bed Leveling Kit (as image shows). If you have any question about this product, please feel free to contact us!

Detailed Information available on our Homepage…

Official Creality CR-20 Pro 3D Printer with BLtouch, Resume Print Glass Bed Magnetic Bed Large Build Volume 220x220x250mm

2019 Newest 3D printer CR-20 Pro

Matrix Automatic Leveling, quality Bill Touch automatic leveling device.And the CR-20 Pro will automatically measure the height of 9 unique points on the heated bed to determine the ideal settings for perfect prints every time.

Newly magnetic Sticker and Tempered Glass Plate

We provide two plate for CR-20 Pro, No need to use textured paper and glue anymore, easier to remove the model and solve the printing edge problem, more cost effective! Two plates for all filament.More choice and More effective!

 Brand teflon tube

Upgrade brand teflon tube with high temperature resistant makes the feeding smoother, Improved the printing quality.

 Brand Power Supply:

The high power supply, which delivers 270W of power to the printer, taking it from room temperature to 110℃ in just 5 minutes, realizing stable printing,Long printing time and long service life.

 Resume Print:

 CR-20 Pro has the ability to resume printing even after a power outage or lapse occurs.No need to worry about power outage.

 Easy to install:

4+2 Screws for quick installation, two modules just need six screws and can be quickly installed.  You don’t need worry any problem about install. Best Printer for novice

Feature

Model: CR-20 Pro

Printing Size: 220*220*250mm

Molding Tech: FDM

Nozzle Number 1

Slice Thickness: 0.1mm-0.4mm

Nozzle Diameter Standard 0.4mm

Precision: ±0.1mm

Filament: φ1.75mm PLA

File Format:  STL/OBJ/AMF

Working Mode: Online or TF card offline

Slice: Software Creality Slicer/Cura/

Repetier-Host/Simplify3D

Power Supply Input:  AC 115V/230V 50/60Hz

Output

Product Features

  • BL Touch leveling device – Matrix automatic leveling, 9-point leveling to simplify the level process, provide great help for users who suffered for such troubles.
  • Resume Print – The printer is shielded by its power supply from voltage spikes and power outages, prints can be resumed from the last layer even if electrical power is lost.
  • Simple but exquisite figure – Extremely easy installation. Two modules, 4+2 screws to finish installation in 1 minute sweep off all troubles even to a beginner. No extra control box takes up your limit space.
  • Main Upgraded Features – Not limited to a UL certified power supply, advanced blue Teflon tube, a magnetic hotbed sticker, and a glass building plate.
  • Creality 3D Direct store – All of our products come with a 1-year limited warranty and lifetime technical support. If you have problems with the printer, please contact SELLER firstly instead of Amazon, for a satisfactory solution.

Click Here For More Information