Super 3D 2 x 2M Blue PTFE Tube Teflon ID 2mm OD 4mm with PC4-M6 PC4-M10 Pneumatic Connector Accessories for Reprap 3D Printer 1.75mm Bowden Hotend Extruder

Compatibility: Compatible with all 1.75mm PLA ABS 3D printer, works with Anet A8. 
Installation: connecting by the outer thread of the quick fitting. 
Disassemble: press and hold the blue or black end of the quick fitting and pull out the tube. 
Attention: small 3D printer accessories, please keep away from children. 
Advantage:
➤Widely applied for connecting extruders, PTFE fittings. 
➤Pneumatic fitting supports turn 360 freely, Easy to install and remove.
➤2 end connections of quick fittings is able to bear greater and stronger impulse but won’t coming off.
Teflon tube: 
Smooth surface, Non-stick & Corrosion resistance.
Environmentally friendly and pollution free & Durable.
Self-lubricating: can convey materials smoothly with smallest friction coefficient. 
High&low temperature resistance: usable temperature -190℃~+260℃, almost unaffected by temperature.
Material: PTFE (Poly Tetra Fluoro Ethylene)
Outside Diameter: 4mm
Inside Diameter: 2mm
Density: 2.15-2.20g/cm3
Color: Blue
Length: 2m

PC4-M6 Fittings
Inner diameter(blue end): 4mm
Thread: M6/3mm
Material: copper and plastic
Color: golden+blue

PC4-M10 Fittings
Inner diameter(black end): 4mm
Thread: M10/6mm
Material: stainless steel and plastic
Color:black + silver

Package included: 
2 x 2M PTFE tube (2.0mm ID/4.0mm OD)
4 x PC4-M6 fittings
4 x PC4-M10 fittings

➤If you have any question, just click on the “Contact Seller” button  or leave your question into “Customer Questions & Answers” . 

Product Features

  • Teflon Tube: Durable material: PTFE; Length: 2m; OD 4mm, ID 2mm
  • PC4-M6 fittings: thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm, the fitting made of premium copper and plastic, sturdy and durable
  • PC4-M10 fittings: thread M10/6mm, inner diameter(black end) 4mm, fit for the tube whose outer diameter is 4mm, the fitting made of stainless steel and plastic, high hardness, antioxidtion, anti corrosion
  • Compatibility: compatible with all 1.75mm PLA ABS 3D printer
  • Installation: connecting by the outer thread of the quick fitting, easy to install

Detailed Information available on our Homepage…

Creality 3D Printer Ender 3 Replacement Parts Assembled Extruder Hotend with Capricorn Bowden PTFE Tubing /4010 Cooling Fan×2/0.4 Nozzle×5 for Ender 3 / Ender 3 pro/Ender 3X

3D Printer Replacement Parts Ender 3 Hotend Extruder Heating Kit
with Capricorn Bowden PTFE Tubing XS Series
3D Printer Creality Ender 3 Pro Extruder Hot End Kit:
Material: Aluminum & Stainless Steel & Brass.
Installation type: external thread connection
Nozzle size: 0.4mm
Operating temperature range: -40 ~ +260°C (-40 ~ +500 °F)

Capricorn Bowden PTFE Tubing:
1)Capricorn Teflon tube is well regarded as the highest quality PTFE tubing in all of 3D printing.
The tight tolerances make sure that the filament is lead directly to the hot end with as little
room for error as possible between the extruder and the hot end.
2) Capricorn PTFE XS Series is rated for withstanding the highest temperatures in the
market which is perfect for printing exotic filaments such as ABS, Nylon, and
Polycarbonate. Standard PTFE tubing may experience dangerous “off-gassing” if
the hot end is heated to temperatures beyond 240*C and will get worse with higher heats.
This Capricorn XS series is safe in 3D printer usage up to 300*C thanks to its
proprietary manufacturing methods

24V Cooling and Circle fan:
Fans easy installation and high-efficiency heat dissipation;
Cooling fans with Low noise and 6000r/min rated speed;
2 Terminal Connector with 2pin-ph2.5

Package List:
1× Ender 3 Hot End Kit with Capricorn PTFE Tubing XS Series
5×0.4mm Nozzle
1× 24V Cooling Fan
1× 24V Circle Fan

Product Features

  • 2020 Upgraded Ender 3 Hotend Extruder Kit for Creality Ender 3 / Endere 3 Pro / Ender 3X
  • Creality Ender 3 replacement extruder be upgraded with Capricorn Bowden PTFE Tubing which high temperature resistant and not easy to carbonize during printing
  • Original Creality 24V 4010 Cooling Fan and 24V Circle Fan for 3D Printer Parts Ender 3/Ender 3 Pro/ Ender 3X; Fans easy installation and high-efficiency heat dissipation; Cooling fans with Low noise and 6000r/min rated speed; 2 Terminal Connector with 2pin-ph2.5
  • Creality 3D Printer Heater Block Silicone Cover MK7/MK8/MK9 Hotend and 5 Pieces 0.4mm Nozzles for ender 3 / ender 3 pro
  • Creality 3D Printer Ender 3 Pro Extruder Hotend kit, white wire was temperature thermistor, braided wire was heating tube 24V40W

Visit The Website For More Information…

Creality 3D Printer Upgrade Kit with Capricorn Premium XS Bowden Tubing, Upgraded Metal Feeder Extruder Frame,Pneumatic Couplers and Bed-level Spring for for Ender 3/3 Pro/5 CR-10 Series/10S/20/20 Pro

Specification:

Capricorn Premium XS bowden Tubing
Additives: Blue Color and Secret High Lubricity Additive Mixture
Best For Chunky Filaments: YES
Best For Flexible Filaments: YES
Color: Dark Blue
Inner Diameter (mm): 1.90 +/- 0.05
Outer Diameter (mm): 3.95 +/- 0.05
Material: Highest Quality Pure Virgin PTFE
Melting Point: up to 340° C

Upgraded Creality 3D Printer All Metal MK-8 Extruder
Material: Aluminum Alloy
Color: Gray
Drive Gear:40 Teeth

Package included:
1 x 1M Capricorn Premium XS bowden Tubing
1 x Gray MK8 extruder drive feed kit
4 x Bed-level springs
1 pair- small and large pneumatic couplers

After sale service and technical support
If you have any issue, please kindly contact us. We will reply as soon as possible within 24 hours.
We will offer you professional customer support and strive our best to offer your solutions.

Product Features

  • 1*Upgraded Creality 3D Printer All Metal MK-8 Extruder Feeder Drive 1.75mm Filament for Ender 3/3 Pro/3 X, Ender 5/5 Plus/5 Pro, CR-10 Series, CR-10S, CR-10 Plus, CR 20/20 Pro, CR-X.It makes loading the filament easier and smoother, no worries about filament scraping or breaking.
  • 1*1 Meter Original Capricorn XS Serious Bowden PTFE tubing with lowest friction on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills.
  • 1 pair- small and large pneumatic couplers to secure PTFE in extruder and hotend.
  • 4* bed-level springs for stiff and accurate bed leveling.
  • Professional Customer Support – If you have any problem or question for our product,please feel free to contact us. We will repond within 24 hours and offer professional technical support to you.

Click Here If You Need More Detailed Info…

Creality 3D Upgrade Parts Assembled Extruder Hotend with Capricorn Bowden PTFE Tubing with Silicone Cover×3 and 0.4mm Nozzle×3 for Creality 3D Ender 3 Ender 3 pro

Please noted that the pins is clamped with long nose pliers.

Specification:
Material: Aluminum & Stainless Steel & Brass.
Installation type: external thread connection
Nozzle size: 0.4mm
Operating temperature range: -40 ~ +260°C (-40 ~ +500 °F)

Package included:
Hot End Kit(Concluded Capricorn Teflon tube)
3*0.4mm Nozzle
3*Silicon Cover

Product Features

  • It’s 100% Creality Original.
  • Capricorn Teflon tubing -Due to its high lubricity and high-temperature resistance, it improves the printing quality and accuracy.
  • Pluggable: the heating tube and temperature thermistor that from control box, connect them with terminal housing and pin. Then you could plug the hotend kit, easier to replace hotend kit.
  • With more terminal housing and pins as spare parts, in case fail installation and waste .
  • MK8 Extruder Hot End kit, white wire was temperature thermistor, braided wire was heating tube 24V40W.

Visit The Website For More Information…