Genuine E3D Brass Volcano Nozzle – 1.75mm x 0.80mm (VOLCANO-NOZZLE-175-0800)

These nozzles are used with the Volcano block and packs to print at large layer heights and extremely high flow rates.

Volcano nozzles are super fast printing nozzles for use with the Volcano block and packs to print large layer heights at extremely high flow rates. Volcano nozzles have extra long heated melt zones for ultimate filament melt speeds. We’ve also carefully crafted the internal geometry to optimise flow and throughput, as well as ensuring the nozzle tip is appropriately sized for flattening down extra wide printed traces.

E3D nozzles are easily identified by the number of hex flats drilled with dots.

Product Features

  • Genuine E3D Parts
  • 1 – 0.8mm High-performance brass nozzles for your Volcano HotEnd per Order
  • Super-fine to super-fat layering, you’ll be making stronger, faster and bigger prints with the Volcano HotEnd PowerUp
  • These nozzles are immediately compatible with the Lulzbot Moarstruder
  • Many RepRap 3D printers including the Prusa i3 can be upgraded with a Volcano

Click Here For More Information

Genuine E3D Brass Volcano Nozzle – 3.00mm x 0.40mm (VOLCANO-NOZZLE-300-0400)

These nozzles are used with the Volcano block and packs to print at large layer heights and extremely high flow rates.

Volcano nozzles are super fast printing nozzles for use with the Volcano block and packs to print large layer heights at extremely high flow rates. Volcano nozzles have extra long heated melt zones for ultimate filament melt speeds. We’ve also carefully crafted the internal geometry to optimise flow and throughput, as well as ensuring the nozzle tip is appropriately sized for flattening down extra wide printed traces.

E3D nozzles are easily identified by the number of hex flats drilled with dots.

Product Features

  • Genuine E3D Parts
  • 1 – 0.4mm High-performance brass nozzles for your Volcano HotEnd per Order
  • Super-fine to super-fat layering, you’ll be making stronger, faster and bigger prints with the Volcano HotEnd PowerUp
  • These nozzles are immediately compatible with the Lulzbot Moarstruder
  • Many RepRap 3D printers including the Prusa i3 can be upgraded with a Volcano

Click Here For More Information

EAONE 14PCS M6 3D Printer 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm Extruder Brass Nozzle Print Head for E3D Makerbot (2pcs/each size)


EAONE 14pcs M6 3D Printer 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm Extruder Brass Nozzle Print Head for E3D Makerbot

Specification
Type: Extruder Brass Nozzle Print Head
Color: Golden
Material: brass
Input Diameter: 1.75mm
Output diameter: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm

Attention: Small parts, keep away from children

Package include
2x 0.2mm Nozzle Print Head
2x 0.3mm Nozzle Print Head
2x 0.4mm Nozzle Print Head
2x 0.5mm Nozzle Print Head
2x 0.6mm Nozzle Print Head
2x 0.8mm Nozzle Print Head
2x 1.0mm Nozzle Print Head

Product Features

  • 14pcs M6 3D Printer 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm Extruder Brass Nozzle Print Head for E3D Makerbot,each size has two nozzles
  • Compatible with all 1.75mm pla abs printer
  • Material: brass
  • Input diameter: 1.75mm; Output diameter: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm
  • Installation: external M6 thread connection

Click Here For More Information

SIQUK 10pcs 0.4mm MK8 Brass Extruder Nozzle Print Heads and 5pcs Cleaning Needles 0.4mm Drill Bits with 2M PTFE Teflon Tube use for MK8 Makerbot Reprap 3D Printers (Bonus: 5pcs Nozzle Throat)


SIQUK 3D Printer Tool Kit

pecific parameter
Nozzle throat: material: stainless steel, outer thread: M6, outer diameter: 7mm, inner diameter: 4mm, inner teflon pipe diameter: 2mm, length: 30mm, filament diameter: 1.75mm. 
Brass nozzles: input diameter: 1.75mm, output diameter: 0.4mm, size: 5*13mm, material: brass, color: golden. 
PTFE teflon tube: outside diameter: 4mm, inside diameter: 2mm, length: 2m, material: PTFE (Poly Tetra Fluoro Ethylene),density: 2.15-2.20g/cm³, heat resistance, up to 260℃, color: White. 
Cleaning Needles Drill Bit: material: stainless steel; bit diameter: 0.4mm.

Compatibility
Compatible with all 1.75mm PLA ABS 3D printer, work well with Anet A8. 

Note: these 3D printer heads are small parts, please keep them away from children to avoid swallow risk. 

package including:
10 x 3D Printer extruder brass nozzle 
5 x 3D Printer nozzle throat 
5 x cleaning Needles drill bits
1 x 2M PTFE teflon tube(2.0mm ID/4.0mm OD) 

Product Warranty

SIQUK are devoted to offer premium quality products to all cherished customers. Meanwhile supply 45 days money back guarantee and 18 months warranty.

If there are any questions, please feel free to contact us, SIQUK Direct Customer Service Team will spare no efforts to assist with you within 24 hours

Product Features

  • Brass nozzle- 10pcs 3D printer Brass nozzle; output diameter: 0.4mm; input diameter: 1.75mm; material: brass; color: golden
  • Cleaning Needles Drill Bit- 5pcs cleaning needles drill bits; material: stainless steel; bit diameter: 0.4mm
  • PTFE Teflon Tube- length: 2m; material: PTFE (Poly Tetra Fluoro Ethylene);outside diameter: 4mm; inside diameter: 2mm; density: 2.15-2.20g/cm³
  • Nozzle throat- 5pcs 3D Printer nozzle throat; material: stainless steel; inner diameter: 4mm; inner teflon pipe diameter: 2mm; filament diameter: 1.75mm
  • Applicability and compatibility- A total of 21 pcs kit suitable for MK8 Makerbot Reprap Prusa I3 3D Printer, compatible with all 1.75mm PLA ABS 3D printer

Click Here For More Information