Laliva 3D Printer – DC 12V Soil Moisture Sensor Relay Control Module Automatic Watering of The Humidity Starting Switch

Product Details
12V soil moisture sensor controller module Lower humidity start automatic watering
Humidity is below the set humidity start means that when soil moisture is below the set humidity , the relay will automatically pull, start spraying , water pumps , etc. do humidifying action reaches the set humidity is automatically stopped.
Purpose:
Adjustable via potentiometer control soil moisture threshold , which can automatically vegetable garden , garden automatic watering , household pots of soil moisture control , electronic game , etc., with a power relay , can control high current devices , less than the set humidity automatically start relay , more than the set humidity automatically disconnected , and a delay function to resolve without delay the humidity critical state relay flickered question is a simple and practical soil moisture control system.
Product Descriptions:
1 using the company\’s high-quality soil to make the soil moisture sensor detection surface is nickel plated, has widened sensing area can improve conductivity, prevent rust easily contact with soil problems and prolong life .
(2) products can be controlled over a wide range of soil moisture , adjustable via potentiometer control the corresponding threshold , the humidity is below the set value, the relay starts , higher than the set value, the relay is switched off .
3 product with a delay function , delay 3-5 seconds , when the humidity in the critical condition is detected , the relay does not flicker , flicker occurs .
4 high-quality products using Songle relay can withstand the load of 1500W , meet the requirements of most people .
5 products with a power indicator and relay instructions .
Electrical parameters:
Supply voltage : 12VDC Input current : more than 100ma
Load : 250V 10A AC or DC 30V 10A (below a current of this range can be used)
Module for use:
1 soil moisture sensor for detection .
2 modul

Product Features

  • 1 using the company\’s high-quality soil to make the soil moisture sensor detection surface is nickel plated, has widened sensing area can improve conductivity, prevent rust easily contact with soil problems and prolong life .
  • (2) products can be controlled over a wide range of soil moisture , adjustable via potentiometer control the corresponding threshold , the humidity is below the set value, the relay starts , higher than the set value, the relay is switched off .
  • 3 product with a delay function , delay 3-5 seconds , when the humidity in the critical condition is detected , the relay does not flicker , flicker occurs .
  • 4 high-quality products using Songle relay can withstand the load of 1500W , meet the requirements of most people .
  • 5 products with a power indicator and relay instructions .

Click Here For More Information

THE RESET Moon LAMP Lighting Night Light LED 3D Printing, Warm and Cool White Dimmable Touch Control Brightness USB Charging, Rechargeable Home Decorative Lamp, Wooden Stand Creative Gift 5.9 Inch

THE RESET Moon Lamp: Using the 3D printing manufacturing technology to reproduce Luna Surface,layer by layer stack, makes it looks just like a true moon you can handing. Specifications: – Printing Material: PLA – Material Feature: environmental,non-toxic – Data Source: NASA Satellite Data – Size: 5.9 Inch – Battey Capacity: 400mAh – CCT: 3000K~6000K – Power Supply: USB DC 5V – Charging Time: 2~3 hours – Working Time: 4~20 hours (depends on brightness) Package content: – 1* Moon Night Light – 1* USB Charging Cable – 1* Wooden Stand – 1* User Manual Add to your “CART” now to enjoy your amazing experience and THE RESET your life!!!

Product Features

  • ✔️3D PRINTING TECHNOLOGY: This Moon lamp is made by most innovative 3D printing technology and price astronomical data, to create a texture that is very similar to the real moon. Built in rechargeable lithium battery, give you surprise that you must be handing a real moon, it brings you lucky and happiness.
  • ✔️INSTRUCTION: Touch the control switch within 1 second to switch light color (white and yellow), and touch more than 1 second to adjust the brightness of the light.
  • ✔️BRILLIANT DESIGN: This 3D print night lamp is made by 3D printer with eco-friendly materials (PLA), rechargeable lithium battery included and USB charging (include cable without Adapter), long touch control brightness and short touch switch the color. Our 3D print moon light offer you an impressively wide 360 degree beam angle
  • ✔️BEST SHOPPING EXPRIENCE: Our goal is to provide you with a quality product. We aim to make you happy with your purchase. However, if you’re not completely satisfied, then CONTACT US and we will give you a 100% refund within 90 days of purchase. It is our intention to offer the BEST customer service on Amazon.
  • ✔️GOOD DECORATIONS AND GIFTS: The brilliant 3D moon light design brings you mystery and romance, suitable for many occasions, ideal creative decorations for courtyard, bedroom, dinner table, pathways, parties, cafe and can create a wonderful atmosphere that beyond your expectations. It is also a perfect gift to girls boys kids, your loved one or girlfriend.

Click Here If You Need More Detailed Info…

Moon Lamp, 3D Moon Light, Warm and Cool White, Stepless Dimmable Touch Control, Home Night Light with USB Charging, PLA Material, Birthday Party Gifts

If you love the space or have a child that does but is afraid of the dark, then the Moonlight night light would be the perfect addition to your home.

This realistic looking night light has been made to look like the moon and has craters and pockmarks along the surface to mimic the moon’s surface..

As well as this the Moonlight emits a soft white glow that really does look like moonlight (as the name suggests) and will light the area around it up with a soft white light..

You can place it anywhere you like. This would be a perfect addition to your child’s bedroom night table or in a home office where you simply want a nice relaxing soft light.

Product name: Moon nightlights 

Material: PLA 

Body color: White 

Lighting Color: white and yellow

Bulb: LED 

Battey capacity: 450mAh 

Classification:Li-ion battery

Charging time: 3 hours 

Working Time: 8-24 hours (depends on brightness) 

Size: 10cm Diameter 

Package content: 

1* Moon night light 

1* USB charging cable 

1* Wooden Base 

1* Gift Box and 1*Instruction

Product Features

  • ADVANCED SEAMLESS 3D PRITING. One-piece mold technology, seamless and perfect surface. 3D printing reproduced every crater of moon faithfully based on NAVA data. Light up MAGIFIRE moon lamp, bring moonlight to your home, and decorate your dream with fantasy.
  • STEPLESS DIMMING.It has warm and cold white two colors. Long hold the charge port for stepless dimming. Switch for your best brightness, let its cozy light relief your anxiety, bring peace for your sleep.
  • INTIMATE DESIGN.Two way control, slap moon or touch bottom to change color or close lamp either. We have light signal to indicate charging status. Red light for still charging, green light for fully charged.
  • HIGH GRADE MATERIAL.Every details matters! We only use high grade material. The surface is made of biodegradable PLA.(Consumption level)Safe and environment friendly. The led and battery inside is also top grade. 2 hours charging fully for 8 hours use.
  • CUSTOMER GUARANTEE.Our goal is to provide you the best service. If you’re not completely satisfied, then CONTACT US and we will give you a 100% refund within 90 days of purchase.

Check Out Our Website For Details…

SODIAL 3D printer accessories motherboard control board MKS GEN-L V1.0 compatible ramps open source marlin

* SODIAL is a registered trademark. ONLY Authorized seller of SODIAL can sell under SODIAL listings.Our products will enhance your experience to unparalleled inspiration.
SODIAL(R) 3D printer accessories motherboard control board MKS GEN-L V1.0 compatible ramps open source marlin
Use CH340 serial port chip, more easily install the drive than 16U2.8. Run Marlin firmware, the configuration is completely same as Ramps 1.4, and available to directly replace the Ramps 1.4.Support Ramps 1.4, 2004LCD,12864LCD, TFT28 and TFT32.Available to input 24V, the heated bed current can be reduced to 1/4 at the same system power which effectively resolves the problem that the MOSFET of heated bed heats.
X axis, Y axis and Z axis with different color terminal controls the stepper motors and endstops, which is convenient to wire.Plug the stepper drivers according to the different color terminals which decreases the probability of reverse and prevents the controller board damage.
Name: MKS-Gen-L V1.0 Controller Board
net weight: 0.1KG
colour: black+yellow+red
Material: metal
Package Contents:
1pcs * MKS-Gen-L V1.0 Controller Board
1pcs * USB line(Random color, don’t accept the specified color. )
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

Product Features

  • Aiming at the problems exist on the open sourced controller board such as Ramps 1.4, the developers in Makerbase specially optimize and develop a new product, MKS Gen_L, which provides more flexible choices for users.
  • 2560 and Ramps 1.4 are integrated in the board, which avoids the complicated connectors.Support a variety of stepper drivers such as A4988, DRV8825, TMC2100 and LV8729, available to change the stepper drivers and motors as users like.
  • Reserve external driver signal, available to connect external high-current driver to drive the 57 and 86 stepper motors.
  • Use high-quality MOSFET, better cooling and more stable.Use specific power chip, support 12V-24V power input, and resolve the problems of chip heating and power shortage.Stable and reliable filter circuit greatly reduces interference and avoids crashes as possible in the process of printing.

Detailed Information available on our Homepage…