Pls kindly use this kind of solid glue on hot bed of 3d printer, which can help to stick 3d printing models more tightly.
pls use it on hot bed before printing, and sprinkle a little water when you use a removal tools to make a little gap, the printing models would be easily to take it down.
- Water-soluble material: It is easier to remove the printing models.
- Usage: Use it on hot bed.
Check Out Our Website For Details…
● Cartridge heaters is consist of a cylindrical stainless steel tube and thus provide a high corrosion prevention
● The heating wire inside which is wound onto a ceramic core
● The number of coils varies depending on the power, and provide a great uniform distribution of heat, which considerably increases the long life of the heater as well as prevents the oxidation of the heater wire even at high temperatures
● The solids, liquids, and gases need to be heated by cartridge heater, transmit heat quickly by conduction if the producer of the heat (the cartridge) is in direct contact with the heat sink (any solid, liquid, or gas)
Cartridge Heater Application:
● Widely used for manufacturing plastic and rubber parts in the car industry or in the food processing industry, etc
● Semiconductor chamber heating, semiconductor wafer lead connection, semiconductor wire and die bonding
● Freeze protection and deicing of equipment in cold climates or applications ● Humidity Control
● Patient Comfort heating used in medical devices
● Mold die and platen heating
● Seal bars used in packaging equipment
● Test sample heating in gas chromatography
● For 3D printers: use TEMP_SENSOR 11 in Marlin firmware
● Small Size: 1.25mmx2.0mm glass bead
● High accuracy: ±1%
● Resistance value at 25°C=100K
● Wiring insulation: high temperature teflon/PTFE
● Wiring length: 1 meter
● Operating temperature range: -40 ° C … + 300 ° C
● Dissipation power factor: ≥ 5MW / ° C (static air)
● Rated power: 45MW
● Thermal time constant ≤ 7S (static air)
● Temperature Coefficient of Resistance; -2-5% / ° C
5x 12V Cartridge Heater with 1.0m Wire
5x NTC Thermistor 3950 100k
1x Allen Wrench
- Cartridge Heater Material: 304 Stainless Steel, Voltage: 12V, Power: 40W. Conveniently pre-wired with 1 meter long high temperature Teflon insulated wiring
- Thermistor Color: White, support for NTC 3950 is included in Marlin firmware, use TEMP_SENSOR 11 in firmware configuration. Temperature sensor 100KΩ accuracy of ± 1%
- The number of coils varies depending on the power, and provide a great uniform distribution of heat, which considerably increases the long life of the heater as well as prevents the oxidation of the heater wire even at high temperatures .
- Cartridge heater is consist of a cylindrical stainless steel tube and thus provide a high corrosion prevention.
- CHPOWER is a TRUSTED VENDOR, we provide 12-month manufacturer warranty on all parts. Buy with confidence.
Detailed Information available on our Homepage…
This modified MK8 Extruder has a filament guide tube, all screws, spare drive gear, and upgraded Bowden tube fitting, for CR 10 3D Printer. Our design gives complete support of flexibles from the intake and output ends. We’ve reduced the price and complexity of printing flexibles. It will also allow to print faster with sustained quality and no risk for grinding the filament.
Frankly, it looks amazing, and performs better than the plastic version included in stock printers. It allows you to print flexibles, and regular plastic filaments.
Also included is an upgraded bowden tube fitting, which does not slip, as the stock one can. Every screw and washer we would recommend for this installation is included.
● This extruder set is great for Creality 3D CR-10.
● Made of high quality metal material.
● Easy and convenient to use.
● With high quality and durable performance.
● 100% brand new and in good condition.
● Color: As pictures show.
● Main material: Metal
1x Creality 3D – Extruder Upgrade Kit
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- UPGRADE: Original MK8 extruder aluminum for Creality 3D Printers CR-10 Series, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus. Upgrade your Creality 3D Printer Extruder with our New “Metal Anodised Aluminum” Upgrade Kit.
- STABLE and DURABLE: Full metal aluminum alloy, DIY kit and you need to assemble by yourself. Our MK8 extruder hotend include all the necessary screws & parts needed to directly replace your old original weak Creality plastic extruder.
- EASY TO INSTALL: All you do is unbolt the old original Creality plastic extruder & screw in the new “Metal Extruder” and ready to start printing. Used for 1.75mm filament of 3D printer MK8 bowden extruder frame.
- ADVANTAGES: The advantages of our extruder drive is you have better stronger pressure pushing the filament into the printer nozzle and so will improve on the printers’ performance. Our extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed.
- Trusted Vendor: CHPOWER is a TRUSTED VENDOR, we provide LIFETIME manufacturer warranty on all parts. Buy with confidence.
Visit The Website For More Information…
Tweezers and 10pcs of 0.4mm needles for cleaning and unclogging 3D printer nozzles
Type : Extruder Nozzle Drill
With storage box
Used for 3D Printer nozzle
Please clear the nozzle when heated to 200 °C while using the drill
10pcs nozzle drill + 1Pcs tweezers
- Material: Stainless Steel
- Sharp quality tweezers and 10pcs of 0.4mm nozzle cleaning needles
- 3D printing tweezers great for nozzle maintenance and cleaning excess support material
- Used for 3D Printer nozzle
- Package Included: 10pcs Nozzle Drill +1Pcs tweezers
Click Here If You Need More Detailed Info…