9milelake 1.75mm Black ABS 3D Printer Filament – 1kg Spool (2.2 lbs) – Dimensional Accuracy +/- 0.05mm

The filaments are universally designed and compatible with 3D Printers using 1.75mm diameter filament, with a dimensional accuracy of +/- 0.05mm.

Frequently Asked Questions

1) Filament not extruding properly?

A: Check the type of filament you’re working with and set the proper extruder temperature based on the filament type and heated build platform if applicable; trial and error. Rule of thumb is to set the extruder temperature to the highest temperature for the specific filament, then decrease the temperature by 5°C until properly extruded. Please note this will vary with each 3D printer.

2) How do I store my filament?

A: Most filaments tend to absorb moisture from the air; because of this your filament can become brittle and slowly degrade the quality. It’s recommended to keep unused filament and store it in a storage container or zip lock bag with a desiccant.

3) Won’t the print stick to the build platform?

A: First, review FAQ #1. Second, for PLA it’s recommended to use blue painters tape and ABS it’s recommended to use kapton tape. If printing with ABS and the print will still not stick to the build platform you can use “*ABS Sludge” a little goes a long way. You can use this on the build platform on top of kapton tape.

*When creating the ABS sludge (mixture of acetone and ABS scraps), create the mixture in well ventilated area preferably outside. Using this sludge will make the print stick to the build platform really well and may be difficult to remove the print, use at your own discretion and a plastic scraper will come in handy.

Product Features

  • 1 KG (approximately 2.20 lbs) Spool
  • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
  • ABS (Acrylonitrile Butadiene Styrene) 3D Printer Filament Vacuumed Sealed With Desiccant
  • Recommended Extrusion/Nozzle Temperature 210°C – 240°C (410°F – 464°F), Use With Heated Build Platform Is Recommended
  • Spool Diameter: 8

Detailed Information available on our Homepage…

SmartOmni 1.75mm Red ABS 3D Printer Filament – Dimensional Accuracy +/- 0.02mm – 1kg Spool (2.2 lbs) for 3D Printers RepRap, Makerbot, UP plus, Lulzbot, Afinia, Solidoodle, MakerGear, Printrbot LC etc.

Description:

Our Thermoplastic 3D Filaments are made from the best materials available and have been thoroughly tested for the best possible results.

ABS Materials are extruded with great precision, meaning better looking prints, less calibration and fewer extruder failures.

The materials work flawlessly with most 3D extruder’ currently in the market.

Features:

Molding materials for 3D printer

Material: ABS

Color: Red

Filament diameter: 1.75 mm

Net weight: 1 kg/2.2lb

The best melting point temperature: 230 degrees Celsius

Print temperature range: 210?? – 250?? Celsius

Suitable for makerb/reprap/Mendel and other commonly used models

Package Size: 19.5 x 19.5 x 7cm

Package content(s):

1 X 3D Filament roll with spool

Product Features

  • Color: Red
  • Printing Material: ABS; most common 3D printing material
  • Dimensional Accuracy: +/- 0.02mm; makes your designs much Smoother and well-made
  • Printing Material Diamater: 1.75mm
  • Heating Temperature: 210-250 Degree Celsius

Detailed Information available on our Homepage…

HATCHBOX 1.75mm Wood 3D Printer Filament – 1kg Spool (2.2 lbs) – Dimensional Accuracy +/- 0.05mm

Welcome to Hatchbox 3D Printer Filament

Our engineered filament is here to help you stream your creative outlet, enabling you to see your thoughts and concepts engineered into a real and rewarding reality.

The filaments are universally designed and compatible with 3D Printers using 1.75mm diameter filament, with a dimensional accuracy of +/- 0.05mm.

Frequently Asked Questions

1) Filament not extruding properly?

A: Check the type of filament you’re working with and set the proper extruder temperature based on the filament type and heated build platform if applicable; trial and error. Rule of thumb is to set the extruder temperature to the highest temperature for the specific filament, then decrease the temperature by 5¡C until properly extruded. Please note this will vary with each 3D printer.

2) How do I store my filament?

A: Most filaments tend to absorb moisture from the air; because of this your filament can become brittle and slowly degrade the quality. It’s recommended to keep unused filament and store it in a storage container or zip lock bag with a desiccant.

3) Won’t the print stick to the build platform?

A: First, review FAQ #1. Second, for PLA it’s recommended to use blue painters tape and ABS it’s recommended to use kapton tape. If printing with ABS and the print will still not stick to the build platform you can use “*ABS Sludge” a little goes a long way. You can use this on the build platform on top of kapton tape.

*When creating the ABS sludge (mixture of acetone and ABS scraps), create the mixture in well ventilated area preferably outside. Using this sludge will make the print stick to the build platform really well and may be difficult to remove the print, use at your own discretion and a plastic scraper will come in handy.

Product Features

  • 1KG (2.2 lb) Spool
  • Wood 3D Printer Filament Vacuumed Sealed With Desiccant
  • Recommended Extrusion/Nozzle Temperature 175°C – 220°C (347°F – 428°F)
  • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
  • Spool Diameter: 8″ – Spool Width: 2.50″ – Spool Hub Hole Diameter: 1.25″

Click Here For More Information

HATCHBOX 1.75mm Glow in the dark PLA 3D Printer Filament – 1kg Spool (2.2 lbs) – Dimensional Accuracy +/- 0.05mm

Welcome to Hatchbox 3D Printer Filament

Our engineered filament is here to help you stream your creative outlet, enabling you to see your thoughts and concepts engineered into a real and rewarding reality.

The filaments are universally designed and compatible with 3D Printers using 1.75mm diameter filament, with a dimensional accuracy of +/- 0.05mm.

Frequently Asked Questions

1) Filament not extruding properly?

A: Check the type of filament you’re working with and set the proper extruder temperature based on the filament type and heated build platform if applicable; trial and error. Rule of thumb is to set the extruder temperature to the highest temperature for the specific filament, then decrease the temperature by 5°C until properly extruded. Please note this will vary with each 3D printer.

2) How do I store my filament?

A: Most filaments tend to absorb moisture from the air; because of this your filament can become brittle and slowly degrade the quality. It’s recommended to keep unused filament and store it in a storage container or zip lock bag with a desiccant.

3) Won’t the print stick to the build platform?

A: First, review FAQ #1. Second, for PLA it’s recommended to use blue painters tape and ABS it’s recommended to use kapton tape. If printing with ABS and the print will still not stick to the build platform you can use “*ABS Sludge” a little goes a long way. You can use this on the build platform on top of kapton tape.

*When creating the ABS sludge (mixture of acetone and ABS scraps), create the mixture in well ventilated area preferably outside. Using this sludge will make the print stick to the build platform really well and may be difficult to remove the print, use at your own discretion and a plastic scraper will come in handy.

Product Features

  • 1 KG (approximately 2.20 lbs) Spool
  • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
  • PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant
  • Recommended Extrusion/Nozzle Temperature 180°C – 210°C (356°F – 410°F)
  • Spool Diameter: 8″ – Spool Width: 2.50″ – Spool Hub Hole Diameter: 1.25″

Click Here For More Information