[Gulfcoast Robotics] Thermistor Upgrade for Maker Select Plus and Wanhao Duplicator i3 Plus 3D Printers.

Our thermistor can replace stock thermistor in Duplicator i3 / Maker Select V1, V2, V2.1 and Plus 3D Printers. Thermistor assembled with 600C rated ceramic glue and fiberglass insulation wires. Wiring insulation can withstand much higher heat than stock PTFE insulated thermistor, it will result in longer service life and you also can print more different materials on your printer without damaging thermistor.

NTC 3950 HEX thermistor features:

M3x0.5 threaded stud to use in place of M2 clamping screw on MK10 extruder heater block.
Wiring insulation: fiberglass.
Wiring length: 130mm.
Connector type: JST XHP.
NTC 100K thermistor 3950K beta A value.
Use TEMP SENSOR number 11 in Marlin.
High accuracy: 1%.
Resistance value at 25°C=100K

Package contents:

1 x HEX stud NTC 3950 100k Thermistor for Wanhao / Maker Select.

Product Features

  • Drop-in replacement for stock thermistor on MP Maker Select Plus / Wanhao Duplicator Plus
  • Also compatible with MP Maker Select V2.1 and Wanhao Duplicator V2.1
  • Easy to mount with M3 HEX stuв
  • Can hold temperature up to 300C with ceramic glue and fiberglass insulation on leads
  • Designed and manufactured by USA Company

Visit The Website For More Information…

[Gulfcoast Robotics] Z-Brace Frame Support Kit for Wanhao Duplicator i3 and Maker Select V1, V2 and V2.1 3D Printers

This kits is a result of our effort to improve existing and popular Z-brace kits based on 3D printed parts. Our kit is fully metal kit, no printed parts. It looks minimal compared to the 3D printed Z-brace designs, but it will make your frame completely stable, just like other similar kits.

In our kit we use ball joints to eliminate any tension created by misalignment between upper and lower bracket. Off shelf M5 ball rod ends are making our Z-brace design simple and clean looking.

Convenient feature of our kit is ability to allow fine adjustment of the each Z-rod length. Z-Brace rod design is based on turnbuckle principle – each rod will extend and contract by turning tube clockwise or counterclockwise. When you are done with adjustment – just tighten counter nuts on each rod end to get rid of any small play and you will make your adjustment permanent. After you tighten counter nuts your frame will become completely solid and stable.

Product Features

  • Compatible with Wanhao Duplicator i3 and Maker Select V1, V2 and V2.1 3D Printers
  • For Maker Select PLUS 3D Printer please use other kit sold in our store
  • CNC machined all metal design. Black anodized parts will look great on your 3D Printer
  • Designed and manufactured by USA company

Click Here If You Need More Detailed Info…

[Gulfcoast Robotics] Rear Mounted Z-Brace Frame Support Kit for Wanhao Duplicator i3 and Maker Select PLUS 3D Printers

This kit is our newest design that replaces previously popular PLUS 3D Printer Z-brace kit. New kit is rear mounted and will allow better access to print platform.

In our kit we use ball joints to eliminate any tension created by misalignment between upper and lower bracket. Off shelf M5 ball rod ends are making our Z-brace design simple and clean looking.

Convenient feature of our kit is ability to allow fine adjustment of the each Z-rod length. Z-Brace rod design is based on turnbuckle principle – each rod will extend and contract by turning tube clockwise or counterclockwise. When you are done with adjustment – just tighten counter nuts on each rod end to get rid of any small play and you will make your adjustment permanent. After you tighten counter nuts your frame will become completely solid and stable.

Product Features

  • Compatible with Wanhao Duplicator i3 and Maker Select PLUS 3D Printers
  • For Maker Select V1, V2 and V2.1 3D Printer please use other kit sold in our store
  • CNC machined all metal design. Black anodized parts will look great on your 3D Printer
  • Designed and manufactured by USA company

Click Here If You Need More Detailed Info…

[Gulfcoast Robotics] Borosilicate Glass for Wanhao Duplicator i3 Anet A8 MP Maker Select 3D Printers, 4mm Thick.

100% borosilicate glass, flat, heat resistant plate, does not warp during long term use. 4mm thick – will not break when you remove your print from it.

Plate fully matches 220x220mm heated bed on many popular 3D printers. This plate is larger and thicker than typical 3mm plates sold for use with MK2 heated beds.

Borosilicate glass material has excellent thermal and chemical properties compared to soda lime glass. Resists cracking due to direct high heat, perfect for a 3D printer bed. It is used on top of your heated print bed and provides excellent results. Please make sure your 3D printer will accept this size before making purchase.

Please take a look at the supplied drawing for dimensions and details.

Glass plate features:

Dimensions: 219x219mm, 4mm thick.
100% borosilicate heat resistant glass (it has yellow tint as opposed to soda lame glass green tint).
Cut corners to clear with mounting screws.
Very flat and does not warp during use.
Can be used as 3D printer print surface, with or without heater board.

Package Contents:

1 x Borosilicate Glass Print Surface 219x219mm x 4mm thick.

Product Features

  • Thick 4mm glass plate will not warp or bend under heat
  • Compatble with Maker Select, Wanhao Duplicator, Anet A8 and other 3D Printers
  • 219x219mm outer size, see attached drawing for details.
  • Plate perfectly matches larger aluminum plates 220x220mm on Wanhao Duplicator i3, MP Maker Select, Anet A8
  • 100% Borosilicate glass content

Detailed Information available on our Homepage…