7″ inch WIDE 3D Printing Made In USA PRO Grade Blue Painters Tape Masking Clean Release Easy Removal NO RESIDUE (144MM x 55M 5.7 inch). 3D Printer bed grip deck cover 3D Prints Removal 60 Yd

3D printing enthusiasts will LOVE this tape! Cover your printer bed deck for easy removal of prints and replace tape easily as it wears. 3D printers do not come with good surfaces for easy print removal.

This Blue Painters Tape is Professional Grade multi-use Contractors tape featuring a specially formulated, high tack adhesive. Works for textured, semi-rough, or smooth surfaces and has the tackiness it needs to adhere to your surfaces yet allows for clean removal up to 21 days.

High performance masking tape is for general industrial, construction, and do-it-yourself use. The acrylic adhesive system will not dry out or lose holding power. Works well on drywall, glass, hardwood floors, wood trim, and a variety of surfaces. Most typical use is LATEX paint jobs and window protection mask off.

(REMOVE SLOWLY and carefully from freshly painted surfaces!)

Very Important: Surfaces must be well cleaned, dust free, greaseless, and dry before application. While the backing of the tape is moisture resistant the adhesive is not. Adhesive is pressure & heat sensitive. Make sure you press it firmly after application. Apply at room temperature or above if possible. The dryer and warmer the installation area, the more firmly pressure is applied, the better the adhesion (less bleed). Remove upon completion! (always pull gently at slight angle AWAY from painted edge) Painters tape is known as semi-permanent removable, it gets stronger every day. The longer you leave it on the more difficulty removing it. Rolled or brushed paint jobs require much sooner removal than sprayed.

Blue Painters Tape is not for everything! May not play well with all types of oil based paints, lacquers, etc. You must be willing to experiment, there are 100’s of kinds of tape for a reason.

Other uses: 3D print bed masking or printer deck covering, Glue or Caulk lines, Over spray protection, Chrome protection when cutting or grinding.

Product Features

  • Premium #1 Grade USA MADE Product – Thicker paper, Stronger adhesive for Contractors & Pros
  • 6 Mil High Tack creped backing, 22.0 steel adhesion, 20 lb tensile strength, 9% elongation
  • UV Resistant for 10 days up to 150 degrees outdoors, 40-125 indoor range for 21 day clean removal
  • 3D Printer bed print surfaces – Strong, flexible, durable, versatile – broad range of applications
  • Dispenser friendly, Pulls off roll VERY quick without tearing, needs LESS pressure to stick down.

Click Here For More Information

Hillside-kit Pen Nozzle for 3D Printing Pen 0.7mm Printer Head Part Replacement Integrated Inserted Design Easy Install Work for 1.75mm ABS/PLA (Black) (Pen Nozzle)

Hillside-kit 3D Printing Pen njector Head Nozzle For 2nd Generation
Descriptions :
Used for 1.75mm ABS & PLA filament
Heating temperature: 70-80℃
Nozzle Diameter: Approx. 0.7 mm / 0.28 “
Nozzle Total Length: Approx 1.5cm
Material :non-metal aerial material
Color : Black

Package Includes :
1 x Nozzle for 3D Printer Pen

Note : Please check your original 3D Printer Pen Nozzle before placing the order. Please be sure the specifications above and its appearance are the same. Then it will meet your needs. 

Product Features

  • Integrated inserted design make this nozzle easier to be replaced. You could just press the buckle lightly and the nozzle will be disassembled.
  • If the nozzle is jammed, you could remove and clean it at any time with easy access.
  • The temperature of the nozzle could reach no more than 70-80℃, which could prevent you from scald in accident.
  • Safety design with non-metal aerial material makes you feel relieved during your printing time.
  • The nozzle of 3D printing pen belongs to perishable items, choose from reliable supplier

Visit The Website For More Information…

TOTALPACK 3D ABS 1.75mm Printing Filament For 3D Printers-Universal, Low Warp & Easy To Print Thermoplastic Filament, Dimensional Accuracy +/-0.02mm, Perfect For Beginners & Pros-1kg Spool, White-1 Pk

Welcome to TotalPack 3D Products Our engineered filament is here to help you stream your creative outlet, enabling you to see your thoughts and concepts engineered into a real and rewarding reality. The filaments are universally designed and compatible with 3D Printers using 1.75mm diameter filament, with a dimensional accuracy of +/-0.02mm. ABS or Acrylonitrile Butadiene Styrene, is a tough and durable thermoplastic. It’s ability to with stand higher temperatures, ABS is one of the most popular and commonly chosen material on the market. ABS can be used for full functional models, and is the closest material to real production models. The 3D printed object will have a glossy type finish with we love it: Prints at higher temperature Tough and durable Requires less manual finishing Process in acetone for polished finish.

Product Features

  • UNLEASH YOUR CREATIVITY WITH THE MOST RELIABLE 3D FILAMENT!-While other cheaply-made 3D printing filaments are hard to work with, require a heated print bed and smell funny, the TOTALPACK 3D ABS filament is here to make 3D printing not only easier, but also more fun! Even if you’rea 3D printing newbie, you can easily use our premium filament to take your creations to a whole other level!
  • THE BUDGET-FRIENDLY FILAMENT THAT’S SUPER-EASY TO USE!-You don’t have to be a 3D printing master in order to use our low-warp and odourless 1.75mm/diameter 3D printer filament. The easy-to-print material is ideal for 3D printing beginners, hobbyists, weekend DIYers as well as professionals thanks to its versatility and strength! Plus, its affordable price will offer you a bigger bang for your buck!
  • HIGHLY COMPATIBLE WITH ALL STANDARD 3D PRINTERS!-What separates the TOTALPACK 1.75mm 3D ABS filament is its unparalleled versatility. You can use it with almost all 3D printers, both commercial and professional, including AirWolf, BigBox, CraftBot, MakerBot, XYZ Da Vinci, FlashForge, Ultimaker, E3D, OrdBot, Prusa, Robo 3D, CEL, CubePro and many many more!
  • THE ECO-FRIENDLY, LOW-WARP FILAMENT FOR EVERY 3D HOBBYIST!-Unlike other 3D printing filaments, the TOTALPACK ABS 1.75mm filament is made from renewable sources, which makes it more eco-friendly, while to lack of warping will make using it a breeze. Plus, the dimensional accuracy of +/-0.02mm will enhance its precision. Finally, it require less energy, since the recommended nozzle temperature is 210°C – 240°C (410°F – 464°F)!
  • 100% SATISFACTION OR YOUR MONEY BACK!-When it comes to your satisfaction, we don’t like to settle. That’s why we proudly back our premium ABS filament with our unconditional money back guarantee. If, for any reason, you’re not 100% thrilled with our filament’s performance, we promise to buy itback from you at full price. No questions asked!

Check Out Our Website For Details…

3D Printing Pen Kit For Kids – 3D Pen Set That Fits In Your Hand – Safe and Educational For Kids, Grown Ups – Easy To Use 3D Doodler Pen – Comes With All You Need In A Great Value Pack.

Now You Can Hold The Incredible Power of 3D Printing Between Your Fingers

This isn’t just a drawing tool – it’s a way to turn your dreams into 3D objects that you can see, touch, and hold in your hands. At the push of a button, you can “draw” in mid-air, creating an incredible 3D sculpture as easily as drawing a line on a paper.

Easy To Use – Even For Kids

The pen is incredibly easy to use, so your children can practice creativity and unleash their imagination in a 3D space. Just load up the pen with the included colorful plastic filament, push a button, and within seconds they’ll be able to create anything they put their minds to. It’s also educational, helping children to develop their spatial reasoning skills and think in three dimensions. The pen can also create complex designs and serious artwork, so it’s engaging for older teenagers and adults too.

Everything You Need In One Great Value Package

We’ve included everything you need to get started. Inside the package you’ll find:

1×3D printing pen
1×Power Adapter
1×Manual
1×Stand for the Pen
1xSpatula
6×3m 1.75mm PLA Filament
1×3D Print Removal Tool
5xPaper stencils

PLEASE READ:
– DO NOT touch the nib when using pen, it gets hot
– PLEASE UNLOAD the filament after use and turn off the power
– Children should use it with adults supervision
– CUT head of the filament before loading filament

We believe this is the easiest to use 3D pen available today, packed with full of content, and we want to you to experience it for yourself for 30 days – risk free. If you have have issues with it, please contact us to get replacement or full refund.

Unleash Your Imagination and Start Creating Incredible 3D Works Of Art – Pick Up This 3D Pen Today!

Product Features

  • CREATE INCREDIBLE 3D ART AT THE TOUCH OF A BUTTON: Drawing isn’t just for paper anymore! This 3D pen lets you easily draw in mid-air to create beautiful artwork that you can reach out and touch. Turn your dreams into real, 3D objects in a matter of minutes.
  • SPARK YOUR CHILDREN’S CREATIVITY: This is the ultimate creative toy for kids, and will capture their imagination for hours on end. It will develop their creative thinking and spatial reasoning skills, and also keep them incredibly entertained.
  • EASY TO USE FOR KIDS AND GROWN-UPS: Anyone can pick up this pen and get started immediately. Just choose a color, load it up, press the button and you’re ready to create incredible 3D art. It can create both simple shapes and complex designs, so it’s fun for both kids and adults.
  • SUPPORTS PLA & ABS FILAMENT AND COMES WITH EVERYTHING YOU NEED: This package includes the 3D pen, a high quality power adaptor, a protective PET sheet to create your artwork on and to help easy drawing removal, templates to spark ideas, 18m of filament in six vibrant colors, and a spatula to remove your masterpiece from the surface when you’re done.
  • 100% MONEY BACK GUARANTEE: We want you to test out this 3D pen at home 30 days – risk free. If you aren’t satisfied with it for any reason, then simply contact us to get replacement or a full refund. We wan’t to hear how we can make our products better

Click Here If You Need More Detailed Info…