The Noblik brand is only authorized to sell Noblik branded goods. Buying goods from Noblik gives you a great shopping experience. Product Name:Lerdge Optical Endstop
The optical switch is a reliable stop/switch solution for any type of 3D printer/CNC/3D tool.
Advantages:Using optically transmissive principles of design,no loss,no noise,and longer life(more than one hundred thousand times).
Triggering is sensitive and quiet
Repeat positioning is in high accuracy.
Tips:Generally,the system need at least three optical switches.
1* photoelectric limit switch
1* 3pin XH2.54 matching switch cable
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
- Item Type:Switch
- Model Number:Optical Endstop
- range:3d printer parts
Visit The Website For More Information…
The endstop Limit Switches kit fits for Anet A8 Plus 3D printer.
The package includes 3pcs limit switches(2pin), one of one with pulley and the other two without pulley; 3pcs cables, 750mm(1pcs) and 500mm(2pcs).
Triggering is sensitive, repeat positioning is in high accuracy, with a longer service life.
Small size, easy installation, just plug and play.
100% brand new and high quality, perfect 3D printer parts.
Suitable: For Anet A8 Plus 3D Printer
Cable Length: 750mm, 2pin(1pcs); 500mm, 2pin(2pcs)
Package Size: 9 * 8 * 2.5cm / 3.5 * 3.1 * 1in
Package Weight: 23g / 0.8oz
1 * X Limit Switch Cable
1 * Y Limit Switch Cable
1 * Z Limit Switch Cable
2 * Limit Switch
1 * Limit Switch with Pulley
- The endstop Limit Switches kit fits for Anet A8 Plus 3D printer.
- The package includes 3pcs limit switches(2pin), one of one with pulley and the other two without pulley; 3pcs cables, 750mm(1pcs) and 500mm(2pcs).
- Triggering is sensitive, repeat positioning is in high accuracy, with a longer service life.
- Small size, easy installation, just plug and play.
- 100% brand new and high quality, perfect 3D printer parts.
Visit The Website For More Information…
3pcs Creality 3D Endstop Limit Switch with Cables for Ender 3
1. X axis endstop limit switch with cable
2. Y axis endstop limit switch with cable
3. Z axis endstop limit switch with cable
4.X axis Motor Cable 5. Y Axis Motor Cable
6. Z Axis Motor Cable 7. E Acis Motor Cable
Detailed Information available on our Homepage…
CNC Expansion Board:
-GRBL 0.9 compatible
-Runs on 12-36V DC
-4-Axis support: X, Y, Z
-It can drive 4 stepper motors, and each stepper motor only needs 2 IO ports.
That is to say, 6 IO ports can manage 3 stepper motors very well,
which is very convenient to use.
KeeYees UNO R3 Board:
-Operating Voltage: 5V
-Input Voltage (recommended):7-12V
-Input Voltage (limit):6-20V
-Flash Memory: 32 KB of which 0.5 KB used by bootloader
-Digital I/O Pins: 14 Digital I/O Pins (6 PWM outputs)
-Analog Input Pins: 6 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA
-SRAM: 2 KB
-EEPROM: 1 KB
-Clock Speed: 16 MHz
Tips: Find more information about Arduino UNO R3 with the Expansion Board IO Port with our tutorial.
DRV8825 Stepper Motor Driver:
-Applied for driving stepper motors up to 8.2V-45V 2.5A
-4-layer PCB board (better heat dissipation)
-6 different step resolutions:
full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step
Mechanical Switch Endstop:
-Length of Cable: 70 cm
-Red line — VCC (ramps of +)
-Black wire — GND (ramps of -)
-Green Line — SIGNAL (ramps in s)
1 x CNC Shield Board
1 x KeeYees UNO R3 Board
4 x DRV8825 Stepper Motor Driver with Heat Sink
4 x RAMPS Mechanical Switch Endshop
20 x 2.54mm Black Jumper Caps
1 x 1.5m USB cable for UNO R3 Board
- 【KeeYees UNO R3 Board】 KeeYees UNO R3 Board uses the same ATmega328 and ATMega16U2 as official Uno R3 and 100% compatible with the official version. It comes with free 1.5m USB cable for convenient connection.
- 【CNC Expansion Board with Free 20pcs Jumpers】This is the latest version of the expansion board, which can be used for engraving machines and 3D printers. It can drive 4 A4988/DRV8825 stepper motors. The jumper caps are necessary for CNC setups. You do not need to purchase this part extra.
- 【DRV8825 Stepper Motor Driver w/ Heat Sink】DRV8825 is upgrade of A4988! It is a must-have module for 3D printers, CNCs and engraving machines. The 4-layer PCB board has better heat dissipation performance.
- 【Mechanical Switch Endstop】It uses a 22AWG wire that can withstand a current of 2A and a voltage of 300V. Better quality than traditional copper wire. It can reach the insulation temperature of 80℃. It is not easy to break, and very convenient to plug and remove.
- 【Reliable technical support】If you don’t have a CD drive, please visit our website( www.keeyees.com ) to get relevant information or can contact us on Amazon, we will send PDF Document to you.
Click Here If You Need More Detailed Info…