Tag: extruder

WINSINN 3D Printer J-head V6 Hotend Extruder Kit – High Speed Volcano Upgrade + Sensor Copper heater block 0.4mm Copper & Stainless steel Nozzle For PT100 1.75mm Filament

►This is The latest V6 kit, replacement parts is very easy, so you can easily upgrade your printer. High-quality stainless steel nozzle + copper heating block + TC4 titanium alloy, you can ultra-high temperature printing. Let’s try it :)))

 

—————————————————————————————————————

 

►TC4 titanium alloy: TC4 titanium alloy material composition is Ti-6Al-4V, (a + b) type titanium alloy, It has good mechanical properties, specific strength. TC4 strength sb = 1,012MPa, density g = 4.4 x 103, specific strength sb / g = 23.5, while the specific strength of alloy steel sb / g is less than 18. Titanium alloy has low thermal conductivity. Titanium alloy thermal conductivity 1/5 of steel , 1/13 of aluminum, 1/25 of copper , TC4 thermal conductivity l = 7.955W / m.K. The above data is only for reference.

 

—————————————————————————————————————

 

►Sensor heater block is the 2016 new V6 heater block, it compatible with PT100 sensor, size 23*16*12mm

►Copper heater block is The latest heating block, suitable for ultra-high temperature printing, size 22*16*11.5mm

 

—————————————————————————————————————

 

Package include:
►1 x High quality copper + stainless steel 1.75mm-0.4mm nozzle
►1 x High quality copper + stainless steel 1.75mm-0.4mm Volcano Sharp nozzle
►1 x High quality Standard V6 + Volcano +Copper heater block
►1 x TC4 titanium alloy + 4.1mm Bore Heat Break
►1 x V6 Aluminum alloy Radiator + PC4-01 Pneumatic fittings
►1 x Heatsink Shroud + High Speed 3010 Fan 12V 0.1A 9000±RPM
►1 x 12V 40W 1m Heater Cartridge Cable + NTC 100K 3950B Temperature sensor
►2 x Allen wrench + 4 x Fan fixing screw

Product Features

  • Emergency Notice: Recently some customer feedback that V6 heat sink had the thread error, the heat sink in the kit is M6 thread, it can not be used. We are very sorry about this problem. This is our mistake. We apologize to all customers. If you have received a problem product, don’t worry. Contact us immediately, keep your product, we will re-send to you immediately for free. Thank you!
  • TC4 Titanium alloy Heatbreak – Ultra-low thermal conductivity, Make sure the printer stable operation.
  • 3 Models of heater blocks, upgrade your printer, experience the latest high-temperature printer technology.
  • High quality International copper nozzle + stainless steel nozzle (1.75mm-0.4mm)
  • Suitable use for Remote and 1.75mm Filament. With Heatsink Shroud + High Speed 3010 Fan, the fan 0.1A 9000+-10%RPM

Click Here If You Need More Detailed Info…

Hot End for 3D Printer Assembled Extruder DIY Hotend 1.75mm Filament 0.4mm Nozzle 12V 40W Heater Including 10PCS Extra Nozzles and Tubes(30mm Length)

MK8 Extruder Hot End kit, white wire was temperature thermistor, red wire was heating tube 12V/40W
Material: Aluminum and Stainless Steel and Brass
Extra Nozzles: 7*0.4mm, 1*0.2mm, 1*0.3mm, 1*0.5mm
Extra Tube: 10x 30mm Length Extruder 1.75mm Tube Compatible with 1.75mm PLA ABS 3D printer.

Product Features

  • Offers you an easy way to upgrade your hotend with plenty of MK8 brass extruder nozzles for 1.75mm Filament, including 0.4mm(7pcs), 0.2mm(1pc), 0.3mm(1pc) and 0.5mm(1pc).
  • 12V/40W high temperature resistance heater catridge(wire length 1M/39.4inches), operating temperature range:0~+280°C (0~+538°F)
  • Aluminium heater block 20*20*10mm, comes with a necessary screw. Working perfectly with everyday filaments like PLA and ABS. Note: heat block inner hole for set screw: M6 and M3.
  • 30mm Length Extruder 1.75mm Tube, made from Aluminum. Compatible with 1.75mm PLA ABS 3D printer. Reduces extrusion force and improve reliability of retractions thanks to the improved internal surface finish.
  • You can repair your extruder with this kit instead of replacing a new one when your extruder suffers a clog that can’t be fixed. A great replacement hot end for MK8, i3, E3D, Anet A8, Alunar M508, CR7, V2 etc.

Visit The Website For More Information…

WINSINN 4010 12V DC Quiet Cooling Fan 40x40x10mm For DIY 3D Printer Extruder Hotend Makerbot MK7 MK8 CPU Chip Arduino – 2Pin 0.1A 1.2W 6000+-10%RPM (Pack of 5Pcs)

►Size: 40x40x10mm

►Rated voltage: DC 12V
►Rated current: 0.1A
►Power: 1.2W
►Speed: 6000 + -10% RPM
►Noise: 20DBA

—————————————————————————————————————

Package include:
►5 x 4010 12V Fan

———————————————————————————————————————

►Note:
In order to avoid the return of waste of your valuable time, please carefully view the product design drawings before purchase, confirm that the product is suitable for your machine or meet your needs.

►We offer the best products and services, if there has any problems, you can tell us anytime. Thank you:))

Product Features

  • High quality 4010 12v Fan, speed 6000 + -10% RPM
  • It likes to be quiet. Noise: 20DBA
  • Rated voltage: DC 12V, Rated current: 0.1A
  • Power: 1.2W
  • Good price, Good quality. Let’s try it:))

Detailed Information available on our Homepage…

Extruder Drive Feed Black DIY Kit Injection Model for Reprap i3 3D Printer CR-10

Product Features

3D Printer Extruder kit

Used for 1.75mm filament, Reprap, Makerbot

injection model

Net weight: 35g

Package included

1 x Main extruder body

1 x Idler bearing for 1.75mm filament

1 x Brass drive gear

1 x High tension spring

Assembly screws

Product Features

  • Improve Print Quality- This kit can help you improve your print quality by getting rid of filament slippage
  • 3D Printer Extruder kit
  • Injection Model
  • Short Distance
  • 1.75mm Filament- Compatible with 1.75mm filament

Click Here If You Need More Detailed Info…