Genuine E3D V6 All-Metal HotEnd 1.75mm Universal Direct Drive Metal Only (V6-175-MO)

Print the Widest Possible Range of Materials The signature all-metal design allows you to reliably print high temperature materials, and it has added extra functionality with soft and flexible filaments. This opens up a huge range of new opportunities for your printer. High Temperature Performance The V6 can comfortably reach 300°C. By swapping a thermistor for a thermocouple (may require additional electronics) or PT100 you can reach over 400°C. This not only allows you to print extremely high temperature materials like Polycarbonate and Nylons but also eliminates HotEnd meltdown failures associated with PEEK/PTFE designs. The PTFE filament guide inside the V6 HotEnd is never subjected to high temperatures, so there is no risk of damage through overheating. Compact E3D focussed on cutting as much bulk from the E3D V6 as possible. This means an overall length of just 62mm, and low bulk in X/Y dimensions! Easy to Use The new thermistor cartridge simply slides into place and is secured with a single screw. High temperature glass is used in the sleeving to insulate the thermistor legs as well. This makes installing or removing the thermistor a quick and clean process compared to previous methods involving fiddly taping. High Quality Printing E3D kept the sharp thermal transition that gives the high quality printing performance users have come to expect from E3D HotEnds. A sharp thermal break gives better control over filament output so you get more immediate start and stops when extruding as well as retracts that are more effective in combating ooze. This means sharper, more accurate prints that have less stringing, oozing or blobbing. Adaptable The V6 is a fully-integrated part of the E3D Ecosystem. E3D’s nozzles and blocks give more opportunity to choose how to print.

Product Features

  • Genuine E3D Parts
  • The E3D V6 Hot End: Smaller, Easier, High Performance
  • High Temperature Performance
  • Low bulk in X/Y dimensions

Visit The Website For More Information…

Genuine E3D GT2 Belt (6mm) (1m) (M-GT2-BELT)

In our experience this is the nicest belt type to work with in linear motion systems. Really flexible, no stretch, nice fine precise pitch, tight bend radius for easy routing. Makes a nice upgrade for T5 type belts.

Order as much as you need and we will send it in a continuous length.

Price is per 1m, around ~39.5 Inches for those from the USA.

Product Features

  • Genuine E3D Parts
  • GT2 6mm Belt, the nicest belt type to work with in linear motion systems
  • Really flexible, no stretch, nice fine precise pitch, tight bend radius for easy routing
  • Makes a nice upgrade for T5 type belts
  • Price is per 1m (~39.5 inches)

Visit The Website For More Information…

Genuine E3D Brass Volcano Nozzle – 1.75mm x 0.80mm (VOLCANO-NOZZLE-175-0800)

These nozzles are used with the Volcano block and packs to print at large layer heights and extremely high flow rates.

Volcano nozzles are super fast printing nozzles for use with the Volcano block and packs to print large layer heights at extremely high flow rates. Volcano nozzles have extra long heated melt zones for ultimate filament melt speeds. We’ve also carefully crafted the internal geometry to optimise flow and throughput, as well as ensuring the nozzle tip is appropriately sized for flattening down extra wide printed traces.

E3D nozzles are easily identified by the number of hex flats drilled with dots.

Product Features

  • Genuine E3D Parts
  • 1 – 0.8mm High-performance brass nozzles for your Volcano HotEnd per Order
  • Super-fine to super-fat layering, you’ll be making stronger, faster and bigger prints with the Volcano HotEnd PowerUp
  • These nozzles are immediately compatible with the Lulzbot Moarstruder
  • Many RepRap 3D printers including the Prusa i3 can be upgraded with a Volcano

Click Here For More Information

Genuine E3D Brass Volcano Nozzle – 3.00mm x 0.40mm (VOLCANO-NOZZLE-300-0400)

These nozzles are used with the Volcano block and packs to print at large layer heights and extremely high flow rates.

Volcano nozzles are super fast printing nozzles for use with the Volcano block and packs to print large layer heights at extremely high flow rates. Volcano nozzles have extra long heated melt zones for ultimate filament melt speeds. We’ve also carefully crafted the internal geometry to optimise flow and throughput, as well as ensuring the nozzle tip is appropriately sized for flattening down extra wide printed traces.

E3D nozzles are easily identified by the number of hex flats drilled with dots.

Product Features

  • Genuine E3D Parts
  • 1 – 0.4mm High-performance brass nozzles for your Volcano HotEnd per Order
  • Super-fine to super-fat layering, you’ll be making stronger, faster and bigger prints with the Volcano HotEnd PowerUp
  • These nozzles are immediately compatible with the Lulzbot Moarstruder
  • Many RepRap 3D printers including the Prusa i3 can be upgraded with a Volcano

Click Here For More Information