3 Rolls Premium 3″ in x 60 yd USA PRO Grade Professional Blue Painters Tape Masking Trim Edge Clean Release Easy Removal NO RESIDUE (72MM x 55M 2.82 inch). 3D Printer bed deck cover 3D Print Removal

3D printing enthusiasts will LOVE this tape! Cover your printer bed deck for easy removal of prints and replace tape easily as it wears. 3D printers do not come with good surfaces for easy print removal.

This Blue Painters Tape is Professional Grade multi-use Contractors tape featuring a specially formulated, high tack adhesive. Works for textured, semi-rough, or smooth surfaces and has the tackiness it needs to adhere to your surfaces yet allows for clean removal up to 21 days.

High performance masking tape is for general industrial, construction, and do-it-yourself use. The acrylic adhesive system will not dry out or lose holding power. Works well on drywall, glass, hardwood floors, wood trim, and a variety of surfaces. Most typical use is LATEX paint jobs and window protection mask off.

(REMOVE SLOWLY and carefully from freshly painted surfaces!)

Very Important: Surfaces must be well cleaned, dust free, greaseless, and very dry before application. While the backing of the tape is moisture resistant the adhesive is definitely not. ALL adhesive is pressure & heat sensitive. Make sure you press it firmly after application. Apply at room temperature or above if possible. The dryer and warmer the installation area, the more you run your fingers over it, the better the adhesion (less bleed). REMOVE ASAP! (always pull gently at slight angle AWAY from painted edge) Painters tape is known as semi-permanent removable, it gets stronger every day. The longer you leave it on the more difficulty removing it. Rolled or brushed paint jobs require much sooner removal than sprayed.

Blue Painters Tape is not for everything! May not play well with all types of oil based paints, lacquers, etc. You must be willing to experiment, there are 100’s of kinds of tape for a reason.

Other uses: 3D print bed masking or printer deck covering, Glue or Caulk lines, Over spray protection, Chrome protection when cutting or grinding.

Product Features

  • Premium #1 Grade USA MADE Product – Thicker paper, Stronger adhesive for Contractors & Pros
  • 6 Mil High Tack creped backing, 22.0 steel adhesion, 20 lb tensile strength, 9% elongation
  • UV Resistant for 10 days up to 150 degrees outdoors, 40-125 indoor range for 21 day clean removal
  • 3D Printer bed print surfaces – Strong, flexible, durable, versatile – broad range of applications
  • Dispenser friendly, Pulls off roll VERY quick without tearing, needs LESS pressure to stick down.

Click Here For More Information

QIDI TECH Large Size Intelligent Industrial Grade 3D Printer New Model:X-max,5 Inch Touchscreen,WiFi Function,High Precision Printing with ABS,PLA,TPU,Flexible Filament,300x250x300mm

Product Description:
X-max is a new single extruder 3d printer with many cutting-edge technology features and is applicable to families, schools, 3d printing fans, and businesses.
X-max is an advanced industrial grade 3d printer made by QIDI TECHNOLOGY. 
X-max is able to print giant size model, and it is apply to make complex project production. The printer is great to manufacture industrial product and model production.
Key Features:
1.Pull rod filament spool holder suitable for most filaments which in the market.
2.When finished printed model,the printer will shut off automatically.
3.Breakpoint printing.The breakpoint can be saved and the printing can be continued later.
4.Removable Plate:The plate can be taken out and bend to remove the finished models.
5.Wifi connection&PC computer monitoring interface.

Package:
-The QIDI TECH X-max
-Single Extruder
-1x spools filament (N.W.:1kg,material)
-1x Acrylic Cover
-Screws,kits in accessories bag
-Power Supply Cable
-1 16GB USD Flash Drive (contains software,test sample files and operation manual)
-G.W: 36.5KG(around 80.5 lbs)

Printing:
Printing Technology:FDM (Fused Deposition Modeling)
Building Size:300x250x300mm
Layer Resolution: 100~500 microns
Positioning Precision: 11 microns on X and Y and 2.5 microns on Z
Filament Diameter: 1.75 mm
Nozzle Diameter: 0.4 mm

Frame & Body: Metal &Plastic
Extruder Quantity: Single

Self-contained Software: QIDI Print
Compatible software:Simplify3D
Printing Connect Ways:USB Pen Drive,Ethernet cable,WiFi function

Voltage: 115V ~ 230 V
Power:450 W

Packing Dimension: 655x610x715mm

Product Features

  • Single extruder with four sides blowing turbofan
  • 5-inch full color touchscreen with intuitive icons makes for easy operation
  • Build size: 300mm x 250mm x 300mm / 11.8″ x 9.8″ x 11.8″
  • Full metal support more stable than plastic support;Aviation aluminum, CNC machining aluminum alloy
  • QIDI TECH Professional Amazon after-service team,if you have any problem about our 3d printer,we will reply to you within 24 hours.Free one-year warranty.

Click Here For More Information

QIDI TECH 3D Printer, Large Size X-Plus Intelligent Industrial Grade 3D Printing with Nylon, Carbon Fiber, PC,High Precision Printing 10.6×7.9×7.9 Inch

Product Description:
X-plus is an advanced industrial grade 3d printer made by QIDI TECHNOLOGY.
X-plus is able to print giant size model, and it is apply to make complex project production. The printer is great to manufacture industrial product and model production.

Key Features:
1.Pull rod filament spool holder suitable for most filaments which in the market.
2.When finished printed model,the printer will shut off automatically.
3.Breakpoint printing.The breakpoint can be saved and the printing can be continued later.
4.Removable Plate:The plate can be taken out and bend to remove the finished models.
5.Wifi connection&PC computer monitoring interface

Package:
-The QIDI TECH X-plus
-Single Extruder
-1x spools filament (N.W.:1kg,material)
-1x Acrylic Cover
-Screws,kits in accessories bag
-Power Supply Cable
-1x 16GB USD Flash Drive
-G.W: 28KG(around 61.7 lbs)

Printing:
Printing Technology:FDM (Fused Deposition Modeling)
Building Size:270x200x200mm
Layer Resolution: 100~500 microns
Positioning Precision: 11 microns on X and Y and 2.5 microns on Z
Filament Diameter: 1.75 mm
Nozzle Diameter: 0.4 mm

Frame & Body: Metal &Plastic
Extruder Quantity: Single

Self-contained Software: QIDI Print
Compatible software:Simplify3D,Cura
Compatible Computer Systems: Windows 64 bit /Mac
Windows system(64bit))computer  :USB Pen Drive,Ethernet cable

Mac OS system computer :Only support print via USB Pen Drive

Voltage: 115V ~ 230 V
Power:350 W

Packing Dimension: 710x540x520mm

Product Features

  • QIDI TECH X-PLUS 3D printers, designed by top professional team, combine the highest precision 3D technology, and feature the quiet printing, air purification, Wi-Fi connection. Which can be printed on kind of material such as Nylon, Carbon Fiber, PC etc., and also be compatible with any brands of 1.75mm filament.
  • The X-PLUS 3D Printer Kit comes with two different types of extruder assembly. The extruder A had already been installed on the printer. The max printing temperature is 250C, and it can works well with PLA, ABS, TPU. And for extruder B, free to you if you need. The maximum printing temperature is 300C, and can print Nylon, Carbon Fiber, PC. (The latest development, free trial).
  • The X-PLUS with pioneered creation of two different ways for placing the filament. Ventilative printing or enclosed constant temperature printing for you to choose when printing the different types of filament. Double Z-axis driver, ensures more stable and more precise printing quality when you print large model size. Higher configuration 3D printer.
  • Latest slicer software version 5.0: Redesigned UI interface of QIDI software is smarter and more convenient to operate. It has changed the software’s slicing algorithm and improves the print quality by 30 percent and speed by 20 percent. The QIDI software is compatible with all types of QIDI printer, life-time free, an alternative to paid software.(If yours is the old version, please download the latest version on QIDI official website).
  • Backed by with One-to-one QIDI TECH service. If you have queries about 3D Printer, feel free to contact our exclusive and fast support service team, we’ll reply back to you within 24 hours. Free One-year warranty is also guaranteed.

Click Here For More Information

Essentium Engineering Grade PLA 2.85mm, High-Strength & Easy-to-Print Filament, No Nozzle-Jams, for DIY 3D Printing Projects, Dimensional Accuracy +/- .05mm, Black, 750g

The Perfect Filament For Your Projects

Do you have a 3D printer and need a quality PLA filament?

Do you want to create high precision parts?

Do you need a strong PLA for your professional projects?

Forget about thelow quality and cheap filaments that never get the job done!

The Essentium 3D printing filament gives you everything you need for the best price!

So Much More Than Your Standard PLA

The Essentium PLA filament was specially designed by professionals to get over the usual difficulties of PLA and give you a truly unique and high quality product.

The Essentium printing filament is ultra-strong and durable for flawless solid parts printing.

It is also heat resistant andit has a high heat deflection temperature stemming and a superior impact resistance.

This PLA filament is strong and elastic and it will give you professional grade results, no matter what you use it for!

Perfect Printing Every Time

This PLA is very easy to print and it will give you the most amazing results in no time!

The filament is very precise for detailed results and it can give you extremely high speeds.

And the best part?

With Essentium you can say goodbye to warping!

For All Your Projects

This premium quality filament is essential for everyone that wants to create amazing 3D printing projects.

No matter if you are an engineer, a professional manufacturer or just a person that loves DIY projects, this filament is the one for you!

Use it for prototyping projects, small run production or art projects and get the perfect results you were looking for.

Get Yours Now Before We Run Out Of Stock

Just Click Add To Cart

Product Features

  • PROFESSIONAL GRADE FILAMENT: This PLA 3D printing filament was developed by a team of material scientists and it is of such a high quality that it is suitable for professional engineering projects.You can use the PLA filament for all your projects, from prototypes to personal DIY projects.
  • MAXIMUM STRENGTH AND DURABILITY: This premium quality PLA filament is extremely strong and durable for perfect results. The filament is great for solid and quality printing of parts that are incredibly strong. The high-strength filament is very easy to print so you can have the best results in the easiest way possible.
  • HIGH PRECISION RESULTS: With this high quality PLA 3D printing filament you will get the most precise and accurate results. The filament has a dimensional accuracy of +/-.05mm so you can get the detailed results you want in the fastest way possible.
  • BEST VALUE FOR MONEY: At Essentium we give you the best quality products while keeping the cost low so you can have the best without spending a fortune! Our professional grade 3D printing filaments are of the highest quality but very affordable so you can use them for all your everyday DIY projects.
  • MADE IN THE USA: All of the Essentium PLA 3D printing filaments are made with pride in the USA so you can rest assured that you’re getting the best quality products! Your satisfaction is our number one priority, so if there is anything you need, we’re here for you! Just let us know, we’ll be happy to help you.

Check Out Our Website For Details…