Geeetech A10M 3D Printer with Mix-Color Printing, Adopting Open Source GT2560 V4.0 Control Board, Dual extruder Design, Build Volume with 220×220×260mm³

Geeetech A10M 3D Printer Dual extruder 3d printer

Geeetech A10M 3Dprinter, adopting open source GT2560 control board, delivers mix-color objectsand greatly enriches your 3D printing life. Keeping the good performance of itspredecessor A10, it aims to provide users with quality printout andsatisfactory printing experience.

The modularizeddesign provides you with an easier assembly experience. Its classic blue andblack color combo imparts a touch of simplicity and excellence, embodyingGeeetech’s commitment to quality products.

Keeping Prusa I33D printers’ gantry structure and with its build volume as220*220*260mm³, A10M makes the best of the building platform andenables you to view the printing details in 360°. Printing at theaccuracy of 0.1mm, it delivers objects with smooth surface finish, clear anglesand strong structure. Besides, A10M comes with filament detector andbreak-resuming capability, greatly enhancing your 3D printing experience.

Its well-designedextruder greatly reduces the risk of clogging or leaking. A10Mextruder cover features 360°ventilation design, greatly enhancing thedissipation of heat and guaranteeing excellent printing quality.

A10M extrudermotor uses a gear train of 3:1 speed ratio, amplifying input torque andimproving your printing experience. Adopting the modularized design forextruder wiring, A10M makes it easy to exchange the wire.

The V-shapedwheels and rails on each axis, made from wear-resistant aluminum profile,could, in a large measure, reduce the printing noise and offer you a quiet 3Dprinting environment.

Parameters

1)   Printing parameters

Printing technology: FDM

Printing volume: 220*220*260mm3

Printing accuracy: 0.1~0.2mm

Positioning precision: X/Y: 0.011mm   Z: 0.0025mm

Printing speed: 60mm/s

Nozzle quantity: 2-in-1-out single nozzle

Nozzle diameter: 0.4mm

Product Features

  • 【1】Mix-color printer: Dual extruder module and 2-in-1-out hotend which deliver 4 types of printings: Single color, Dual color, Graded color and Mixed color.
  • 【2】Open Source Control Board: A10M 3d printer adopts GT2560 V4.0 open source control board backed by A4988 drivers. Providing limitless space for you to modify the firmware and tinker with your printer.
  • 【3】Firmware Upgrade, the Price Unchanged: CE/FC certified power supply, motherboard upgrade, optimized screen connection, more solid bottom structure.etc. it aims to provide users with quality printout and satisfactory printing experience.
  • 【4】Fast Self-assembly: It comes with four main parts and only takes 5 steps to build it up. All wires are also attached with lables.Very simple and convenient.
  • 【5】After-Sale Services: If you have any confusions with your printer, please reach out us through E-mail/Facebook/Whatsapp.

Click Here For More Information

Geeetech A20T Tricolor 3D Printer,with The Newest GT2560 4.0 Open Source Control Board,Filament Dectector,Breaking-resuming,Self-Leveling Function,255×255×255mm³

Printing parameters
Printing technology: FDM
Printing volume: 250*250*250mm3
Printing accuracy: 0.1~0.2mm
Positioning precision: X/Y: 0.011mm Z: 0.0025mm
Printing speed: 60mm/s
Nozzle quantity: 3-in-1-out single nozzle
Nozzle diameter: 0.4mm
Filament: Diameter 1.75mm; ABS/ PLA, etc
Environment temperature: 10℃-40℃
Compatible with Operating system: Windows/Mac/Linux
Slicing software: Repetier-Host, EasyPrint 3D, Cura
File format: .STL/.Gcode

Electrical parameters
Power input: 100-120V/200-240V
Power output: DC24V/14.6A,350W
Connectivity: TF card, USB
LCD screen: LCD 12864 screen

Mechanical parameters
Printer size: 442x447x480 mm3
Package size: 510x495x305 mm3
Net weight: ~9kg
Gross weight: ~11.5kg

Product Features

  • 3d printer filament dual 2 two trpple 3 three extruder extruders

Click Here For More Information

BIQU GT2560 Controller Board with USB Cable for 3D Printer

Specificaitons:
GT2560 integrated Arduino nega2560 + Ultimaker and Arduino ga2560Me + Ramps1.4 all the features of the composition of body type small, compact arrangement of components, both are perfect to replace Arduino Mega2560 + Ultimaker Shield and Arduino Mega in software or hardware + Ramps1.4 combination. We redesigned the interface completely solve the combined board interfaces tedious troublesome issue, with a smaller volume compact structure and a high level of integration in case of installation features

Dimensions: 110 * 80 * 25mm
Net Weight: 90g
Power supply section: Operating voltage 12V-24V, dual power supply design, supply power to hot bed and and other parts by respectively, hot bed part support 15A current, the other part is 10A
3-way 12V fan output and PWM or other way for LED lighting devices
Three 55Amp MOSFET tube (with Led indicator, the actual output by the PCB and connector restrictions), configure three fins, making it more stable MOS transistor
Three-way division sensor inputs and recommended 100k thermistor
Dashboard firmware uses now the most widely Marlin, ease of use, functional stability all have good performance

GT2560 compare with Ramps1.4 + 2560
GT2560 has the following advantages:
1.Smaller size and save more space
2.Do not need to pack that make the link will more reliable
3.It could be able to use LCD2004 and LCD12864 without the adapter
4.MOS tube plus fin increase the heat sink capacity
5.Controlled fan controlled separately from the extruder
6.DIP switches adjust the drive segment

Package Included:
1*GT2560 Controller Board
1*USB Cable Line

Product Features

  • Set on Ultimaker and Arduino mega2560 function on a motherboard, in terms of both hardware and software perfectly replace the Arduino Mega2560 + Ultimaker Shield combinations, and the volume occupied by smaller, more convenient connections, higher stability
  • Using ATmega2560 as the main chip, with the use of high-performance USB chip FTDIFT232RQ
  • The main circuit adopts SMD fuse, power supply port for reverse protection diode, 5V USB power interface with the recoverable fuse protection 500MA
  • Support 5-way A4988 stepper motor drive (X, Y, Z axes are supported 1 and extruder support 2), use DIP switches to set the motor segment
  • With LCD / SD card expansion interface, you can link LCD screen and SD card expansion board for offline printing (supported LCD2004 and LCD12864)

Visit The Website For More Information…

Shanhai® Gt2560 3d Printer Controller Board Integrated with the Mighty Function of the Arduino Mega2560+ultimaker

Features:
1.Integrated with the mighty function of the Arduino Mega2560+Ultimaker and the Mega2560+ramps 1.4 kit , GT2560 can not only take full place them on respect of both software and hardware, but also features compact size, more convenient connection, and more stable.

2. Adopt ATmega2560 as the main control chip, coupled with the high-performance USB serial converter FT232RQ.  

3. The power pack: operating voltage is 12V-24V; double power supply design feeds for heatbed and logical part separately. The current is 12A for heatbed and 5A for other parts. The cooling fan can support 12V

4. The main circuit adopts SMD fuse tube, the diode added to the power port can provide reverse protection to the whole circuit, in addition, the 5V USB is USB port protected with 500mA Recoverable fuse.

5. 3 12v fan output and one PWM output for LED or other lighting equipment.

6. 3 55Amp MOSFET (with LED indicator, the actual output is restricted by the PCB board and the connector), all 3 MOSFET are equipped with heat sink to ensure sufficient heat dissipation and stable operation.

7. Support 5 A4988 stepper drivers (3 for X/Y/Z axis, and 2 for extruders); the subdivision of stepper motor can be setup by dial switch, eliminating jumper caps, easier to operate.

8. 3 temperature sensor input (100k thermistor is recommended)

9. Extended LCD and SD card interface support both LCD2004 and LCD 12864, with which you can print without your PC.

10. The firmware is the prevalent Marlin, which is known for its stability, usability, and high-performance.

Product Features

  • Integrated with the mighty function of the Arduino Mega2560+Ultimaker and the Mega2560+ramps 1.4 kit , GT2560 can not only take full place them on respect of both software and hardware, but also features compact size, more convenient connection, and more stable
  • Adopt ATmega2560 as the main control chip, coupled with the high-performance USB serial converter FT232RQ
  • The power pack: operating voltage is 12V-24V; double power supply design feeds for heatbed and logical part separately. The current is 12A for heatbed and 5A for other parts. The cooling fan can support 12V
  • The main circuit adopts SMD fuse tube, the diode added to the power port can provide reverse protection to the whole circuit, in addition, the 5V USB is USB port protected with 500mA Recoverable fuse
  • 3 12v fan output and one PWM output for LED or other lighting equipment

Visit The Website For More Information…