BZ 3D A4988 Stepstick Stepper Motor Driver Module  with Heat Sink for 3D Printer Controller Ramps 1.4 MKS Gen L SKR V1.3 Board for 3D Printer Part(Pack of 5pcs)

-Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay) 
-Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection 
-Automatic current decay mode detection / selection 
-Internal UVLO
  -Mixed with slow current decay modes 
-Synchronous rectification for low power dissipation 
-Crossover-current protection 
-Thermal shutdown circuitry 
-3.3 and 5 V compatible logic supply 
-Thermal shutdown circuitry 
-Ground Fault Circuit 
-Load short-circuit protection 
-Of five optional step mode: full, 1/2, 1/4, 1/8 and 1/16

Chip upgrade Using the latest high-quality chips, higher compatibility and better conductivity.(It is believed that only high quality products can ensure the quality of your work and bring safety to your work.)

Product Features

  • Compared with ordinary A4988, our high quality A4988 drive production process is improved again by PCB gold plate process (gold-plated pin) SMT placement machine manufacturing, non-manual welding, higher yield and more stable performance.
  • Performance upgrade: PCB covering copper process upgrade to 2oz (our high-quality copper thickness 70um, ordinary 35um), higher copper content, better heat dissipation performance.
  • Under 2A current, it can work for a long time. It is very suitable for 3D Printer, Mendel, Huxley and other machines.
  • Using the latest chips, higher compatibility and better conductivity
  • Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage toachieve higher step rates.

Visit The Website For More Information…

FYSETC 3D Printer Ender 3 Upgrade Parts, Auto Bed Leveling Sensor Heat Bed Auto-Level Probe Module Accessories Pin 27 Board for Creality Ender 3 CR-10 Filament Sensor BLTouch, Black

FYSETC is a professional supplier of 3D Printers related accessories products. Include Popular Printer CR-10, Ender 3, Prusa i3, Makerbot, Anet A8, Duplicator i3, Tevo Tarantula, Maker Select V2 etc. It has a professional R&D team and high quality after-sales service to ensure that you can purchase at a reliable price. If you need more, please feel free to email or Q&A us, we and our engineers are very happy to assist you.

Please Notes:
Q: My printer is Ender 3, When I put it in the port where the ribbon cable was and install the bltouch and the ribbon cable, when I try to put the case for the control board back on, the fan hits the ribbon cable plug on the pin27 board and cannot close.
A1: If you meet this issues, please don’t worry, only need to print a new top cover, we have shown the file in our pictures. please reference.

Package includes:
1 x pin 27 connector

Product Features

  • 2019 Ender 3 Upgrade parts,compatibility with creality Ender 3, CR-10, CR-10 Mini, but not work with the Ender 2, the ender 2 uses pin 29.
  • How to installtion: With this adapter, no wires need to be cut!! Simply connect this between your board and your cable, attach the 3 bltouch wires and upgrade your firmware.
  • Ensure you connect BLTouch’s 3 pins per the labeling on the board.
  • If you need more other information, please reference the thingiverse (search keywords: ender 3 auto bed leveling sensor) and youtube video(keywords:ender 3 bltouch with sd card).
  • After Sales Guarantee: each one defective item can have the free replace or refund, need more help please feel free to contact us, we and our engineers will try our best to assist you.

Visit The Website For More Information…

Creality CR10 Heatbed 12V Aluminum Heat Bed with Cable and Insulation Mat Installed Well Compatible for 3D Printers Creality CR10 / CR10S Hot Bed Size 310x310x3mm

UCHOOSE, a King Professional 3D printer and Printing Parts Store.
For High Quality & Good Service, We are diligent to Do Our Best!

Note: These are original replacement parts for Creality CR-10 CR-10S 300x300x400mm ;
we only guarantee our heater bed be used on the original creality 3D printer CR-10 and CR-10S; if be used to the other brand modles, customers need to afford to the resonsibility by themselves, meanwhile, our warranty will not valid for this cause.

Specifications:

> Model: 3D Printer 2 in 1 heating bed /Black Aluminum hotbed for CR-10 CR-10S 300x300x400mm 3D Printer
> Product process: Aluminum Substrate
> Hot Bed Size: 310x310x3mm
> Voltage: 12V
> Power: 220W

Package

1 × Aluminum Hot Bed 310x310x3mm With Cable Which be installed well for CR-10 /CR-10S 3D Printer

Warranty:we only guarantee our heater bed be used on the original creality 3D printer CR-10 and CR-10S;
if be used to the other brand modles, customers need to afford to the resonsibility by themselves,
meanwhile, our warranty will not valid for this cause.

Product Features

  • Upgraded 2018 Which Heating Much Faster and with 12V Voltage 18A 220W
  • Original Parts / Accessories Replacement for Creality 3D Printer CR-10 / CR-10S
  • Hot Bed Size:310x310x3mm,Hotbed With Cable Which be Installed Well.
  • We only guarantee our heater bed be used on the original creality 3D printer CR-10 and CR-10S; if be used to the other brand modles, customers need to afford to the resonsibility by themselves, meanwhile, our warranty will not valid for this cause.
  • WARRANTY: All 3D printer accessories with 12 Months Warranty and Lifetime Technical Support.

Visit The Website For More Information…

Upgrade Stepper Motor Driver Heatsink, FYSETC 3D Printer Parts Driver Heat Sink Aluminum Heatsinks Cooling Fin Drivers for Raspberry Pi LV8729 A4988 DRV8825 TMC2208 TMC2100 TMC2130 Driver-10 Pcs, Blue

Package includes: 10 Pack Heatsinks

Product Features

  • Excellent 3D Printer heat sinks and the adhesive: Work well for 3D Printer Reprap MKS Mendel Gel stepper Driver and other motherboard.
  • These sinks are beloved by our favorite engineers for their low cost, ease of use and low thermal resistance!.
  • Size LWH: 10 x 10 x13 mm/ 0.39″ x 0.39″ x 0.51″.
  • Material: Aluminum, very light and easy to install,
  • After sales-Warrnty: We are new seller, professional 3D Printer manufacturer, if you have any good suggestion about the parts or Need more help please contact us with Email. We are appreciate, very happy to service you.

Visit The Website For More Information…