Creality CR10 Heatbed 12V Aluminum Heat Bed with Cable and Insulation Mat Installed Well Compatible for 3D Printers Creality CR10 / CR10S Hot Bed Size 310x310x3mm

UCHOOSE, a King Professional 3D printer and Printing Parts Store.
For High Quality & Good Service, We are diligent to Do Our Best!

Note: These are original replacement parts for Creality CR-10 CR-10S 300x300x400mm ;
we only guarantee our heater bed be used on the original creality 3D printer CR-10 and CR-10S; if be used to the other brand modles, customers need to afford to the resonsibility by themselves, meanwhile, our warranty will not valid for this cause.

Specifications:

> Model: 3D Printer 2 in 1 heating bed /Black Aluminum hotbed for CR-10 CR-10S 300x300x400mm 3D Printer
> Product process: Aluminum Substrate
> Hot Bed Size: 310x310x3mm
> Voltage: 12V
> Power: 220W

Package

1 × Aluminum Hot Bed 310x310x3mm With Cable Which be installed well for CR-10 /CR-10S 3D Printer

Warranty:we only guarantee our heater bed be used on the original creality 3D printer CR-10 and CR-10S;
if be used to the other brand modles, customers need to afford to the resonsibility by themselves,
meanwhile, our warranty will not valid for this cause.

Product Features

  • Upgraded 2018 Which Heating Much Faster and with 12V Voltage 18A 220W
  • Original Parts / Accessories Replacement for Creality 3D Printer CR-10 / CR-10S
  • Hot Bed Size:310x310x3mm,Hotbed With Cable Which be Installed Well.
  • We only guarantee our heater bed be used on the original creality 3D printer CR-10 and CR-10S; if be used to the other brand modles, customers need to afford to the resonsibility by themselves, meanwhile, our warranty will not valid for this cause.
  • WARRANTY: All 3D printer accessories with 12 Months Warranty and Lifetime Technical Support.

Visit The Website For More Information…

Upgrade Stepper Motor Driver Heatsink, FYSETC 3D Printer Parts Driver Heat Sink Aluminum Heatsinks Cooling Fin Drivers for Raspberry Pi LV8729 A4988 DRV8825 TMC2208 TMC2100 TMC2130 Driver-10 Pcs, Blue

Package includes: 10 Pack Heatsinks

Product Features

  • Excellent 3D Printer heat sinks and the adhesive: Work well for 3D Printer Reprap MKS Mendel Gel stepper Driver and other motherboard.
  • These sinks are beloved by our favorite engineers for their low cost, ease of use and low thermal resistance!.
  • Size LWH: 10 x 10 x13 mm/ 0.39″ x 0.39″ x 0.51″.
  • Material: Aluminum, very light and easy to install,
  • After sales-Warrnty: We are new seller, professional 3D Printer manufacturer, if you have any good suggestion about the parts or Need more help please contact us with Email. We are appreciate, very happy to service you.

Visit The Website For More Information…

ANYCUBIC MEGA I3 3D Printer with Patented Heat Bed and Free 1kg PLA Filament, Works with PLA/ABS/Hips/Wood etc

Anycubic Upgraded Full Metal i3 Mega 3D Printer –UltraBase Version

Note:

1. Please check all the wires if are loose before starting it due to the long transportation.
2. The power source have both 110v and 220v, please make sure power supply is correct setting.
3. Before start your printing you need to calibrate the build bed properly according to the use manual.
4. The Z level, extruder and bed temperature needed to be adjusted a bit depending on the material printed.
5. Follow the instruction of manual on inserting filament to reduce clogging issues, although we provide a tool for nozzle cleaning and atomic pulls inside. 
6. Be careful the hot surface during operation, only remove the print models when the bed cooling.
7. Should notice the distance, never let the nozzle directly rub against the ultrabase.
8. Cleaning the parts and build platform, use diluted alcohol rather than isopropanol, or the coating started coming off the center.

Specificaiton:
Printing Technology: FDM (Fused Deposition Modeling)
Print Speed: 20~100mm/s (Recommended Speed 60)
Travel Speed: 100mm/s
Nozzle Diameter: 0.4 mm
Support Print Materials: PLA, ABS, HIPS, WOOD
Operational Print Bed Temperature: 110oC
Operational Extruder Temperature: max 260oC
Ambient Operating Temperature: 8oC – 40oC
Leveling Type: Manual Leveling
Input Formats: .STL, OBJ, .DAE, .AMF
Slicer Software: Cura
Cura Output Formats: G-Code
Connectivity: SD Card & USB support
Input Rating: 100-240V AC, 50/60Hz, 1.5A
Printer Dimensions: 405 x 410 x 453mm
Package Weight: 15kg

Youtube Video:
https://www.youtube.com/watch?v=seIY2dSLJ3Y

Certifications:
CE, FCC, RoHS ,EN

Package List:
1x I3 Mega
1x 8G SD Card
1x User Manual
1x PLA filament ( 1Kg )
1x Tool Set

Product Features

  • 【Fast Assembly】: Mega i3 3D printer came in two modules and all it takes is 8 screws and 3 cables to plug in, easy to assemble and get printing right out of the box; Perfect choice for beginners.
  • 【Easy Leveling】: This 3d printer is equipped with dual Z limit switches and 4 hand twist nuts on the bottom of heat bed, definitely making the bed easier to be levelled; Also, due to its well made mechanical design, the 3d printer can maximally reduce the body shake when printing, thus its printing precision can be guaranteed from the begining.
  • 【Patented Heat Bed】: No hassle of sticker any more; Ultrabase bed surface coated with patented microporous coating,allowing the print holds strong when printing and then effortlessly falls off the bed when it cools to room temp at the end of the print.
  • 【More Function】 ①TFT Touch Screen: Full color, multi-language, user friendly UI ②Filament Detection: Auto pause if filament runs out or break ③Resume Print: One click to resume from the last recorded extruder position when suffered power outages. ④CE Certified Powe Supply: bed can reach up to 110℃ in 5 minutes.
  • 【After-sale Service:】All ANYCUBIC 3D printers are backed with one-year warranty and lifetime technical support;any questions regarding product operation or software please feel free to contact us.

Click Here For More Information

KeeYees Professional 3D Printer CNC Kit with Tutorial for Arduino, CNC Shield V3 w/Jumpers + UNO R3 Board + 4Pcs RAMPS 1.4 Mechanical Switch Endstop & DRV8825 GRBL Stepper Motor Driver Heat Sink

CNC Expansion Board:
-GRBL 0.9 compatible
-Runs on 12-36V DC
-4-Axis support: X, Y, Z
-It can drive 4 stepper motors, and each stepper motor only needs 2 IO ports.
That is to say, 6 IO ports can manage 3 stepper motors very well,
which is very convenient to use.

KeeYees UNO R3 Board:
-Microcontroller: ATmega328P
-Chip: ATmega16U2 
-Operating Voltage: 5V
-Input Voltage (recommended):7-12V
-Input Voltage (limit):6-20V
-Flash Memory: 32 KB of which 0.5 KB used by bootloader
-Digital I/O Pins: 14 Digital I/O Pins (6 PWM outputs)
-Analog Input Pins: 6 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA
-SRAM: 2 KB
-EEPROM: 1 KB
-Clock Speed: 16 MHz
Tips: Find more information about Arduino UNO R3 with the Expansion Board IO Port with our tutorial.

DRV8825 Stepper Motor Driver:
-Applied for driving stepper motors up to 8.2V-45V 2.5A
-4-layer PCB board (better heat dissipation)
-6 different step resolutions:
full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step

Mechanical Switch Endstop:
-Length of Cable: 70 cm
-Red line — VCC (ramps of +)
-Black wire — GND (ramps of -)
-Green Line — SIGNAL (ramps in s)

Package Contents:
1 x CNC Shield Board
1 x KeeYees UNO R3 Board
4 x DRV8825 Stepper Motor Driver with Heat Sink
4 x RAMPS Mechanical Switch Endshop
20 x 2.54mm Black Jumper Caps
1 x 1.5m USB cable for UNO R3 Board

Product Features

  • 【KeeYees UNO R3 Board】 KeeYees UNO R3 Board uses the same ATmega328 and ATMega16U2 as official Uno R3 and 100% compatible with the official version. It comes with free 1.5m USB cable for convenient connection.
  • 【CNC Expansion Board with Free 20pcs Jumpers】This is the latest version of the expansion board, which can be used for engraving machines and 3D printers. It can drive 4 A4988/DRV8825 stepper motors. The jumper caps are necessary for CNC setups. You do not need to purchase this part extra.
  • 【DRV8825 Stepper Motor Driver w/ Heat Sink】DRV8825 is upgrade of A4988! It is a must-have module for 3D printers, CNCs and engraving machines. The 4-layer PCB board has better heat dissipation performance. 
  • 【Mechanical Switch Endstop】It uses a 22AWG wire that can withstand a current of 2A and a voltage of 300V. Better quality than traditional copper wire. It can reach the insulation temperature of 80℃. It is not easy to break, and very convenient to plug and remove.
  • 【Reliable technical support】If you don’t have a CD drive, please visit our website( www.keeyees.com ) to get relevant information or can contact us on Amazon, we will send PDF Document to you.

Click Here If You Need More Detailed Info…