Monoprice Voxel 3D Printer – White with Removable Heated Build Plate (150 x 150 mm) Fully Enclosed, Touch Screen, Assisted Level, Easy Wi-Fi, 8GB Internal Memory

The Voxel is a unique, easy to use, beginner-friendly 3D printer that brings 3D printing to the masses with its simple menu system displayed on a 2.8″ color IPS touch screen. The assisted leveling system reduces calibration to a single tap on the touch screen and the print nozzle can be swapped out in seconds, without the need for tools of any kind. It features 8GB of internal memory for storing 3D models, a USB port for connecting a flash drive, a Wi-Fi® radio with a hotspot option for connecting your PC, and a built-in camera for monitoring print operations. Best of all, the printer comes fully assembled and includes sample 3D models and filament, allowing you to start printing within minutes of taking it out of the box. Quick Change Nozzle Heated Removable Build Plate Assisted Leveling Internal Memory Quick Change Nozzle: Unlike other 3D printers, which require tools and 20-40 minutes of work to replace the nozzle, the Voxel has a quick change nozzle that allows you to change the nozzle in seconds, without the need for tools of any kind. Heated Removable Build Plate: The removable, flexible build plate makes removing a model a breeze. Simply remove and flex it to dislodge the model. You can easily replace it if it becomes damaged or can swap in a second build plate to start a new print immediately after completion of a project. Additionally, it can be heated to temperatures up to 60°C. Assisted Levelling: Assisted bed leveling makes the process of setting up the print bed as easy as a single tap to the touch screen interface. Internal Memory: The printer has 8GB of internal memory

Product Features

  • Quick change nozzle: unlike other 3D printers, which require tools and 20-40 minutes of work to replace the nozzle, the voxel has a quick change nozzle that allows you to change the nozzle in seconds, without the need for tools of any kind
  • Heated, flexible, and removable: The removable, flexible build plate makes removing a model A breeze. Simply remove and flex it to dislodge the model. You can easily replace it if it becomes damaged or can swap in a second build plate to start a new print immediately after completion of a project. Additionally, it can be heated to temperatures up to 60°c
  • Assisted Levelling: Assisted bed leveling makes the process of setting up the print bed as easy as a single tap to the touch screen interface.
  • Auto feeding with filament sensor: makes loading filament simple. Insert your filament into the printer’s filament loading Port, then tap ‘Load filament’ on the color touchscreen menu. Additionally, a built-in sensor recognizes low filament levels and will pause prints in progress until filament is reloaded
  • Please visit Monoprice and search for ‘voxel’ Or Type part number 35881 in the search bar to visit the product page and download the latest software and manual

Click Here For More Information

KIMME 1pcs 3D Printer Accessories 310310mm 220V 750W Silicone Rubber Heated Bed CR-10 Silicone Heating pad

KIMME 1pcs 3D printer accessories 310*310mm 220V 750W silicone rubber heated bed CR-10 silicone heating pad

Detailed Information available on our Homepage…

Anet Aluminum MK2 MK3 12V Heated Bed Hotbed Upgrade with Hotbed Wire Cable Line for for Anet A8 A6 3D Printer, Black 220x220mm

Description of heated bed:
Product resistance: 12V voltage, the resistance of 1.2 ohms
Product voltage: 12V
Product Size: 220mm * 220mm * 3mm hole spacing 214mm
Product process: aluminum plate
Product color: black on the back, front on silver white
Product thickness: 3mm

Feature of heated bed:
1, the whole board full gold process, the cost is much higher than the spray tin plate!
2, the whole board after optical short circuit, open circuit detection.
3, heating table and aluminum substrate into one, better temperature stability.
4, the new circuit, power supply power stability.
5.Aluminum MK2 MK3 heated bed is the updated version of MK2B & MK2A.

Description of heated bed cable:
Item Type: hotbed line for 3d printer
Length : 90cm
Suitable for: Mendel RepRap i3 3D printer A8 A6 and so on.
Feature of heated bed cable:
1. Additonal positive and negative wires to utilise all of the heatbed pins and reduce load.
2. Silicone stranded wires for better flexibility and wear.

Notes:
Our Anet 3D printer motherboard support 12V hotbed, do not support 24V.
12V connection: a line then 1, another line at the same time then 2,3

Package Including:
1* 3d printer hotbed 220×220
1* 90cm heatbed wire

Product Features

  • Large-size aluminum printing platform.
  • Aluminum plate can bear higher temperature.
  • Reduce alice edge rate.
  • Size of hotbed: 220x220mm ( 8.6″ x 8.6″ square), suit for Anet A8, A6 3D Printer.
  • Length of cable: 90cm

Visit The Website For More Information…

Official Creality 3D CR-10 3D Printer with Heated Bed and Large Build Volume 300X300X400mm

Product Parameter:

Printing size: 11.8×11.8×15.7 inches

Assembled printer size: 19.3×16.5×19.7 inches

Printing accuracy:±0.1mm

Layer thickness: 0.1-0.4mm (adjustable)

Nozzle: 0.4mm, 0.3mm, 0.2mm

Extruder quantity: 1

File format : STL, OBJ, G-Code

Operational Software: Linux, Windows, OSX

Layers Software: Cura, Repetier-host, Simplify 3D

Printing Speed:Normal: 80mm/s, Max.: 200mm/s

Working condition temp: 10-30℃, Humidity: 20-50%

Printing Method: micro-SD card (offline printing), PC via USB (online)

Nozzle temp: ≤ 250 degrees C

Hotbed temperature: ≤ 100 degrees C

Filament diameter: 1.75mm

Input voltage: 110-240V

Output voltage: 12V

Power: 360W

Filament: PLA (diameter: 1.75mm)

Nozzle Diameter:Standard 0.4mm

LCD screen: 3 inch LCD screen with aircraft knob

Hotbed: 4mm aluminum alloy platform, 3mm special tempered glass

3D Software supporting: PROE, Solid-works, UG, 3d Max, Rhino 3D design software, etc.

Cura language: English

Interface language: English

Package:

Assembled 3d printer size-

19.3×16.5×19.7 inches

490*420*500mm

Package size-

21.6×20.5×9 inches

550*520*230mm

Gross weight-

22 lbs

10kg

Package List:

1 Unassembled CR-10 3D printer

1ct micro-SD card (Manual and software included in SD card)

1ct Spool PLA 1.75mm filament-200g (unspecified color)

1ct Pack of tools

Product Features

  • SOLID, TIME-TESTED DESIGN: We deliver quality and value in the same package with this famed printer. Truly outstanding in its class, with one of the largest building surfaces at this price point. Perfect for beginners or experienced users.
  • EASY WIRING: We’ve taken care of all the wire and cable management. Package arrives with all wires fully installed on the control board and combined into convenient, organized bundles. Simply connect the control units clearly marked wires to the corresponding machine hardware.
  • HEADACHE-FREE ASSEMBLY: Delivered partially assembled in 3 parts. Full assembly can take less than 20 minutes.
  • MOST POPULAR: The CR-10 is the most popular 3d printer in the market for the past year. The overwhelmingly large community of users have left unique and positive feedback on almost every social media website.
  • OFFICIAL STORE: This is the ONLY Creality 3D official Amazon store. As direct from manufacturer sellers, we provide a 1-year limited warranty for all printers bought from Creality 3D Direct, we also provide professional after-sale support, and lifetime technical assistance. All of which most re-sellers can’t offer.

Click Here For More Information