YXQ 8x120mm Cylinder 110V Cartridge Heater with String for 3D Printer Build Plate 500W 10 Pcs

Power: 500W; Voltage:110V; Current:4.5A

Package content: 10Pcs Cartridge Heater

Product Features

  • Cartridge heater can be inserted into drilled hole to heat the whole part.
  • Max Insertion Deep: 120mm; Drilled Hole Minimum Diameter: 8mm
  • 2 Wires Condition: 1 for hot side, 1 for nuetral.
  • This cartridge mostly used for 3D printer build plate heating, easy using,
  • Notice: The heater will be harder removed if the drilled hole smaller to 5mm diameter.

Visit The Website For More Information…

Anet A2 / A8 3D Printer Part, 5PC 0.4mm Brass Extruder Nozzle Print Head+ 5PC 30mm Length Teflon Throat Tube+ 5PC Heater Blocks Hotend for MK8 Makerbot Reprap i3

Specification of Extruder Tube:
Type: Nozzle Throat
Material: Stainless Steel & Teflon
Length : 30mm (Suitable for Anet A8/A2 3D Printer)
External Thread Diameter: 6mm
Input Diameter: 1.75mm
Compatibility : 3D Printer
Filament Diameter : 1.75mm
Note:Anet A8/A2 For 30mm tube.

Specification of Brass Nozzle:
Type: 0.4mm Extruder Brass Nozzle Print Head
Suitable for the PLA/ABS/TPU filament with diameter 1.75mm
Color: Golden.
Material: brass
Input Diameter: 1.75mm
Output Diameter: 0.4mm
External Thread Diameter: 6mm

Specifications of Heater Block:
Type: Heater Block
Material: Aluminum
Suitable for: 3D Printer
Nozzle & Nozzle Throat Hole: M6
Heater Mounting Hole: 6mm diameter
Hole for Mounting Screw: M3
Thermocouple Mounting Hole: M3
Dimensions: 2 * 2 * 1cm / 0.8 * 0.8 * 0.4in(LWH)

Package Including:
5pcs x 30mm Tube
5pcs x 0.4mm Nozzle
5pcs x Heater Blocks Hotend

Product Features

  • Nozzle Throat: Outer Thread – M6; Inner Diameter – 2mm; Length – 40mm; Filament Diameter – 1.75mm; Material – Stainless Steel.
  • 0.4mm Extruder Brass Nozzle Print Head: Color – Golden; Material – copper (brass); Size – 5*13mm; Input Diameter: 1.75mm; Output Diameter: 0.4mm.
  • Heating block size:20*20*10MM
  • Compatibility: compatible with all 1.75mm PLA ABS 3D printer
  • Package Including:5 piece x 30mm Tube,5 piece x 0.4mm Nozzle ,5 piece x Heater Blocks Hotend

Visit The Website For More Information…

Pudincoco 3D Printer Parts 12V/24V 40W Heating Pipe Single-Ended Electric Heater Tube(Red)

Descriptions:
Heating pipe must be kept efficient drying techniques make use of imported nickel-chromium wire internal use 2080 outside of the pipe to ensure the best real materials in order to achieve maximum service life.
Heating pipe joints should be placed outside of the insulation layer and the heating chamber, shall not exceed the rated working voltage is worth 10% of the shell should be effectively grounded.
Heating pipe working environment temperature less than 95% non-explosive, corrosive gases.
Heating pipe should be stored in a dry place, not damp.

Specifications:
Type: 12V 40W / 24V 40W
Size: 6*20 mm
Lead wire length: 1 Meter
Material: stainless steel
Heating pipe Features: fast heating

Package included:
1* Heatsinks

Notes:
1.Due to the difference between different monitors,the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures.
2.Due to the manual measurement and different measurement methods, please allow 1-3cm deviation.Thanks!   

Product Features

  • The number of coils varies depending on the power, and provide a great uniform distribution of heat,which considerably increases the long life of the heater as well as prevents the oxidation of the heater wire even at high temperatures.
  • The solids,liquids,and gases need to be heated by cartridge heater,transmit heat quickly by conduction if the producer of the heat is in direct contact with the heat sink.

Visit The Website For More Information…

3D Printer Parts 12V/24V 40W Heating Pipe Single-Ended Electric Heater Tube

Features:
Design for replacing the heater tube’s inconvenience trouble,this cartridge heater has the plug connection,making connecting the wirie stable. Easy to install,without needing to disassemble,you can replace the heater directly by plug the damaged one.
The number of coils varies depending on the power, and provide a great uniform distribution of heat,which considerably increases the long life of the heater as well as prevents the oxidation of the heater wire even at high temperatures.
The solids,liquids,and gases need to be heated by cartridge heater,transmit heat quickly by conduction if the producer of the heat is in direct contact with the heat sink.

Descriptions:
Heating pipe must be kept efficient drying techniques make use of imported nickel-chromium wire internal use 2080 outside of the pipe to ensure the best real materials in order to achieve maximum service life.
Heating pipe joints should be placed outside of the insulation layer and the heating chamber, shall not exceed the rated working voltage is worth 10% of the shell should be effectively grounded.
Heating pipe working environment temperature less than 95% non-explosive, corrosive gases.
Heating pipe should be stored in a dry place, not damp.

Specifications:
Type: 12V 40W / 24V 40W
Size: 6*20 mm
Lead wire length: 1 Meter
Material: stainless steel
Heating pipe Features: fast heating

Package included:
1* Heatsinks

Notes:
1.Due to the difference between different monitors,the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures.
2.Due to the manual measurement and different measurement methods, please allow 1-3cm deviation.Thanks!

Product Features

  • Design for replacing the heater tube’s inconvenience trouble, this cartridge heater has the plug connection,making connecting the wirie stable. Easy to install, without needing to disassemble, you can replace the heater directly by plug the damaged one.
  • The number of coils varies depending on the power, and provide a great uniform distribution of heat, which considerably increases the long life of the heater as well as prevents the oxidation of the heater wire even at high temperatures.
  • The solids, liquids, and gases need to be heated by cartridge heater, transmit heat quickly by conduction if the producer of the heat is in direct contact with the heat sink.
  • Size: 6*20 mm.
  • Lead wire length: 1 Meter.

Visit The Website For More Information…