1.75mm MK8 0.4mm Nozzle Thermocouple Extruder Hotend for Prusa i3 3D Printer 12V

Material: Aluminum & Stainless Steel & Brass
Installation type: external thread connection
Scope of application: 3D printer
Nozzle size: 0.4mm
Throat pipe length: 30mm
Aluminum block size: 20 mm x 20 mm x 10 mm
Operating temperature range? -40 ~ +260°C (-40 ~ +500 °F)
Thermistor and heater cable length: 1M
Tip of the nozzle, aluminum heating block, Throat pipe (built-in Teflon).
MK8 Extruder Hot End kit, white wire was temperature thermistor, red wire was heating tube 12V40W.

Compatible with: Canon IP4500/5300, MP610/810, MX850

Product Features

  • High Quality and Fast Ships from USA
  • This is an Aftermarket Part.
  • Package Included: 1 x Aluminum block ,1 x Heating tube (heating tube 1 m long, 12V 40W) ,1 x 1.75MM 0.4MM Brass Nozzle ,1 x M6*30mm Throat pipe (built-in Teflon) 1 x Thermistor + Brass sleeve (1 meter long)

Visit The Website For More Information…

WINSINN 3D Printer Upgrade Bowden MK8 Extruder Hotend Kit Driver Feeder – For 1.75mm Nozzle Filament – TEVO Anet A8 RepRap Prusa i3 Makerbot Accessories Parts


►This Kit NOT Include Motor.

►Suitable For Remote and Short distance

►Extruder Compatible with TEVO, Anet A8, Prusa i3, And any FDM 3D Printer conversion to bowden

►Support: 1.75mm Filament

—————————————————————————————————————

Package include:
►1 x WINSINN Bowden MK8 Upgrade Kit (All Accessories show as Picture 2)

►We offer the best products and services, if there has any problems, you can tell us anytime. Thank you:))

Product Features

  • This Kit NOT Include Motor.
  • This Bowden Extruder can replace MK8 Extruder
  • Suitable For Remote and Short distance
  • For 1.75mm Filament
  • Made by WINSINN

Click Here If You Need More Detailed Info…

E3D V6 Hot End Full Kit, MYSWEETY 3D Printer J-head Hotend with Fan + 5 Pcs Extruder Brass Print Head + 5 Pcs Stainless Steel Nozzle Throat for RepRap 3D Printers

Specification of All Metal V6 Hotend Full kit:
12V/40W heater, the temperature can up to 280°C(Long-term temperature: 240°C/ short-term temperature: 280°C)
12V high speed fan with shroud
One meter long PTFE/teflon tubing 4mm OD 2mm ID
PC4-01 Tube Fitting

Specification of Extruder Tube:
Type : Nozzle Throat
Outer Thread : M6 M7
Nozzle Throat Outer Diameter:6mm
Nozzle Throat Inner Diameter:4mm
Teflon Pipe Inner Diameter : 2mm
Length : 22.5mm
Filament Diameter : 1.75mm
Material : Stainless Steel

Specification of Brass Nozzle:
Type : Extruder Brass Nozzle Print Head
Color: Golden
Material: brass
Input Diameter: 1.75mm
Output Diameter: 0.2mm 0.3mm 0.4mm 0.5mm

Note:
Compatibility:Compatible with all 1.75mm V6 E3D Makerbot 3D printer

Attention: Small parts, keep away from children

Package Included:
1 x All Metal V6 hotend Sets
2 x 0.2mm Nozzle Print Head
2 x 0.3mm Nozzle Print Head
4 x 0.4mm Nozzle Print Head
2 x 0.5mm Nozzle Print Head
5 x 1.75mm Stainless Steel Nozzles Throat

Product Features

  • Package include: All metal v6 j-head hotend full kit + 10 pcs extruder brass nozzle print head + 5 pcs stainless steel nozzle throat.
  • 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality resistance whose temperature can up to 280°C, 12V high speed fan, lose heat quickly.
  • Compatible with all 1.75mm e3d v6 makerbot 3d printer. Nozzle and tube connect seamless, prevent material leaking and blocking.
  • Hotend can be used for both direct feed and bowden applications. Good for ABS, PLA and other conventional print materials.
  • Easy to install, NTC connector with terminal, you can install directly(Hotend is equipped with NTC3950 thermistors).

Click Here If You Need More Detailed Info…

CCTREE 2PCS Cooling Fan 40x40x10mm DC 12V for 3D Printer Hotend Extruder Creality CR-10,Makerbot,Anet Tevo

Description :

Name:DC12V BRUSHLESS FAN
Rated Voltage : DC12V
Operation Voltage: DC10.8-13.2
Consuming Current : 0.10A(0.12 Max.)
Consuming Power: 1.2W(1.44 Max.)
Connector: 2pin-ph2.5

Insulation Level: UL Class A
Certificate: UL,CE
DC Line Length : 120mm
Max. Air Flow: 6.86CFM
Rotation Direction: Clounter-clockwise
Size:40x40x10mm
Size:18g

Package included:
2PCS *Cooling Fan

Product Features

  • Rated Voltage: DC 12V, Consuming Current: 0.1A
  • Dimensions: 40x40x10mm(1.57×1.57×0.39inches)
  • Connector: 2pin-ph2.5
  • DC Line Length : 120mm , Max. Air Flow: 6.86CFM
  • Cooling Fan for 3D Printer Hotend Extruder

Visit The Website For More Information…