BCZAMD 24V 50W Upgraded Ceramic Cartridge Heater Wire 1M 3D Printer Accessories Heating Tube 620mm for Reprap Prusa Mendel i3 MK3 MK10 Maker Select V2 3D Printer Parts V6 Hotend J-head Extruders, 3Pcs

After-sales guarantee: each defective item can be replacement for free or refund. If any question, please feel free to contact or QA us, we will try our best to service you

Specification
Voltage: 24V
Power: 50W
Heating head size: 6 x 20mm
Heating head material: 304 stainless steel
Line length: 39inch /1M
Line thick: 0.5 mm?2; (The cross section of the copper wire inside the heater is 0.5mm?2;)
Color: as shown in the picture
Working Temperature: < 350 degrees

Single-end heating tube use instructions:
1.The effective heating part of the single-end heating tube must be kept dry.
2.The electrical joint of the single-ended heating pipe should be placed outside the insulation layer and the heating chamber. The working voltage should not exceed 10% of its rated value, and the casing should be effectively grounded.
3.The working environment of the electric heating element, the temperature is not more than 95 degrees, no explosive, corrosive gas.
4.The electric heating element should be stored in a dry place and should not be damp.

Package listing:
3 x 24V 50W Ceramic Cartridge Heater

Product Features

  • Apply to Creality CR-10S Pro, CR-X, Ender 3, Ender 3X, Ender-3 Pro, Anet A8, Maker Select V2.1, Monoprice v2, Wanhao Duplicator 3D Printer, V6 Volcano MK8 MK9 MK10 Extruder/Hotend etc.
  • The improvement compared to ordinary red heating tube:
  • 1.From the original ordinary 0.3-line high-temperature line to 0.5-line thick white high-temperature line, can bear higher temperature, and looks more beautiful.
  • 2.From the original 40W power to 50W, the maximum temperature increases from 300-31℃ to 340-350℃. Can be used with the new HT-NTC100K temperature thermistor.
  • 3.The new version heater used in all imported skills, the use of 304 stainless steel, with the internal use of 2080 nickel chrome wire to achieve maximum service life.

Visit The Website For More Information…

WINSINN Titan Extruder Bowden Hotend Drive Feed Kit for RepRap Prusa i3 J-Head V6 Makerbot MK8 MK10-3D Printer Universal Upgrade Part 1.75mm 3mm Nozzle Filament


►This is a Optimized version of 3D Printer Extruder. It is very light and compact. It can use a lighter motor, any Bowden-type 3D printer can become a powerful, reliable little beast. It is easy to manually squeeze, remove, load and unload Filament.
At the same time, You only need a hex wrench, you will be able to within a minute to remove the Titan, regardless of the opening and assembly are very easy and fast.

—————————————————————————————————————

►Installation Points: The top surfaces of the two gear s must be flush adjust the pinion accordingly

►We have done thousands times of tests, including strength testing, time testing and so on. It really works well. Let’s try it:))

—————————————————————————————————————

Package include:
►1 x WINSINN Extruder Full kit (All Accessories show as Picture 2)
►Note: This Kit NOT Included Motor, V6 Hotend, Titan Aero

Product Warranty:

-WINSINN are devoted to offer premium quality products to all cherished customers. Meanwhile supply 60 days money back guarantee and 24 months warranty.
-If there are any questions, please feel free to contact us, WINSINN Customer Service Team will spare no efforts to assist with you within 24 hours.

Product Features

  • ✔️Compatible with E3D-V6 Hotend and Titan Aero Upgrade Kit
  • ✔️High quality Titan extruder, Very easy to upgrade your printer
  • ✔️Filament:1.75mm 3mm PLA / ABS / Flexible / other
  • ✔️Suitable For Remote and Short distance
  • ✔️Note: This Kit NOT Included Motor, V6 Hotend, Titan Aero

Visit The Website For More Information…

ETbotu 3D Printer Parts Bulldog Extruder All-Metal Compatible J-Head MK8 Extruder School Office Supplies

Description:

Item type:3D Printer parts

Feeding method: remote, short-range universal

Connection size: same with bulldog

Weight: 95g

Dimensions: 42 x 42 x 22mm

Model: Bulldog Silver

Material: aluminum alloy

Package Include:

Host 1pc, extrusion wheel 1pc, wire feeder connector 2pcs

Note:

The colors deviation might differ due to different monitor settings.

We provide you with the best product and service, if you have any problem, please let us know, and we will solve the problem ASAP. Thank you so much.

Product Features

  • Symmetrical design (The motor can be installed in the left or right side).
  • All metal extruder.Extruder drive is stable and accurate.Direct drive extruder.
  • Suitable for 42 stepper motors and precision planetary reducer motor.
  • Can be driven as short range or remote extruder.
  • Easy to replace filament , you just need pushing it.

Visit The Website For More Information…

3D Printer Nozzles + 4 DIY Tools for J-Head E3D V5 V6 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm Nozzle Tool for Nozzle Replacement, Spanner, Installation Tools …

No more burnt fingers for me!
This is a must have tool for changing print nozzles. Having the right tools makes all the difference in the world!
——– Feedback by buyer

This is High-precision extruder nozzle produce by CNC.
High quality brass with M6 thread, compliant with all M6 thread 3D printer.
Special tools make you change extruder nozzle FAST, SAFE and EASY.
NOTICE: This spanner only for E3D heat blocks -(16*16mm & 20*16mm), it will not work with MK8 block (20*20mm)

HOW TO REPLACEMENT NOZZLE
Step 1:Turn on 3D Printer, set nozzle temperature to target (PLA: 80-220, ABS: 240-280).
Step 2:After heat done, use SPANNER to hold heat block, use Socket screwdriver to screw old nozzle out. old nozzle will be very hot, don’t touch by hands!!!
Step 3:Put new nozzle to this socket screwdriver, spanner keep to hold heat block, screw nozzle in, must be tight and it is done.
Notice: NOZZLE and Heat Block on 3D printer need heat before take out, don\’t touch it by hands when printer is heading or close less than 10 mins.

Package include:
0.2mm extruder nozzle * 1pc
0.3mm extruder nozzle * 1pc
0.4mm extruder nozzle * 2pcs
0.5mm extruder nozzle * 1pc
0.6mm extruder nozzle * 1pc
0.8mm extruder nozzle * 1pc

Simple spanner * 1pc
3 in 1 screwdriver(1 Handle with 2 Heads) * 1pc

Product Features

  • No more burnt fingers for you! This is a must have tool for changing print nozzles. Having the right tools makes all the difference in the world!
  • Multi-size High-precision extruder nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm
  • Compliant all M6 thread 3D printer: The nozzles used M6 thread, same as MK8 MK7 UM2 CR10 etc.
  • Special tools: special spanner and multi-function screwdriver can help you adjustment 3D Printer and change extruder nozzle more easy!
  • Note: Screwdriver maybe rust, but No effect on use. Spanner only fit for E3D heat block (20*16mm and 16*16mm)

Click Here For More Information