Complete Ultimate Starter Kit for Arduino with Mega2560, LCD, Servo Motor, Sensors,Breadboard and Jumper Cable

Product List
1xMEGA 2560 Board(Arduino MEGA 2560 R3)
1xMEGA 2560 Development Expansion Board
1xMini Breadboard
1xADXL345 Acceleration Sensor
1xUltrasonic Distance Sensor
1xIR Receiver HX1838
1xRemote Controller
1xPS2 Joystick Module
1xRelay
1xStepper Motor
1xULN2003 Stepper Motor Driver Module
1xDHT-11Temperature & Humidity Sensor
1xLED Bar Graph
1xActive Buzzer
1xPassive Buzzer
1xPIR Movement Sensor
1xServo
2xAnalog Temperature Sensor(Thermistor)
1xBreadboard Power Supply Module
1×4*4 Matrix Keyboard
1xDC Motor
1xL9110 DC Motor Driver
1xLCD1602
1xDot-matrix Display
1×7-segment Display
1×4-bit 7-segment Display
1xNE555 Timer
2x74HC595
2xLight Sensor (Photoresistor)
2xTilt Switch
2xSwitch
1xRGB LED
8xRed LED
4xGreen LED
4xYellow LED
4xBlue LED
16xResistor(220O)
10xResistor(1kO)
10xResistor(10kO)
2xPotentiometer(10KO)
5xCapacitor(104)
4xCapacitor(10uF)
4xButton(large)
8xButton(small)
1xButton Cap(red)
1xButton Cap(white)
2xButton Cap(blue)
4xNPN Transistor(8050)
4xPNP Transistor(8550)
4x1N4148 Diode
4x1N4001 Diode
1x9V Battery Clip
1xBreadboard
1xUSB Cable
40xMale to Male Jumper Wires
20xMale to Female Jumper Wires
20xFemale to Female Jumper Wires
1xHeader(40pin)
1x Band Resistor Card
1x Project Box
About Arduino:
Lesson 1 Blinking LED
Lesson 2 Active Buzzer
Lesson 3 Controlling an LED with a button
Lesson 4 Controlling Relay
Lesson 5 Serial Port
Lesson 6 LED Flowing Lights
Lesson 7 LED bar graph display
Lesson 8 Breathing LED
Lesson 9 Controlling a RGB LED by PWM
Lesson 10 Play the Music
Lesson 11 LCD1602 display
Lesson 12 A Simple Voltmeter
Lesson 13 7-segment display
and so on

Product Features

  • This is an upgrade complete Arduino starter kit designed for beginners and electronic hobbyists.
  • With more than 33 projects, it is esay and convenient for you to learn Arduino and programming
  • The starter kit will make a great gift for any to-be engineers, or anyone looking to get a jump start in the world of microcontrollers and programming. Hundreds of tutorials and guides can be found online and the range of projects that can be created with an Arduino is vast
  • This kit comes with everything that the average beginner Arduino project requires, plus more, 50 kinds of different electronic components, more than 180 components, such as Arduino Mega2560, 1602 LCD display are included. It has enough variety to learn most of what can be done with the arduino and electronics in general
  • The kit is a great help for you learning electronics! Lots of little bits to start doing Arduino things

Click Here If You Need More Detailed Info…

Haitronic 120pcs 20cm length Jumper Wires/dupont cable Multicolored(10 color) 40pin M to F, 40pin M to M, 40pin F to F for Breadboard/Arduino based/DIY/raspberry Pi 2 3/Robot Ribbon Cables Ki

We Haitronic are original Factory with traditonal wholesale distributors on various jumper wires, arduino wire connectors.

New released on Amazon only on Oct 7th 2016, although there are few reviews till now, we actually sold few hundreds of a month.

This 3 in 1 set Jumper wire is Durability Tested ULTRA USERFUL!

After you tear apart into individual cable, in total 120pcs cable, 10 different color do to multiful DIY electronic connection. Each axis has 20cm length, with 10 colors option(each color has 12 roots), and 3 various F2F, F2M, M2M pin, very convenient for Arduino/breadboard or other DIY connection, Maker experiment, engineers LAB testing, as well as can be soldering as you wish.

——————————————————–

Features:

Ø Color: 10 options as shown in the pictures.

Ø Material: high-grade copper core.

Ø Each cable length: 20cm / 8-inch.

Ø 3 pieces of the 40pin breadboard jumper wires in one set together.

Ø Including one 40-pin male to female jumper wires, one 40-pin male to male jumper wires, one 40-pin female to female jumper wires.

Ø The male ends meant for insertion into standard 0.1 quot;(2.54mm) female sockets and the female ends are meant for insertion into standard 0.1 quot;(2.54mm) male headers.

Ø The cables can be separated into single root as you request to do multiple connection.

Ø Portable design, easy and safe to use.

——————————————————–

What’s in Package:

* 1 x 20cm 40-pin Male to Female prototyping Jumper Wires Ribbon Cable

* 1 x 20cm 40-pin Male to Male prototyping Jumper Wires Ribbon Cable

* 1 x20cm 40-pin Female to Female prototype Jumper Wires Ribbon Cable

ØYour REVIEW is ULTRA PRECIOUS! we sincerely invite you share your review for this Multicolored BB Jumper Wires, MANY THANKS!

Product Features

  • 10 different colors, 120units copper cable in total, for making prototypes with arduino boards, stepper motor 3D printer etc, The combinations provide a jumper for whatever you need. Just peel off
  • Factory directly, 10 tiny copper wires inside of single jumper wire: high-level copper wire inside, durable for conductive connection.
  • 0.127mm, 36 AWG/ single root, 20cm(7.87inch)/axis; Standard 2.54mm headers and sockets.
  • Can be detached into120 single axis: 40 male-male, 40 male-female, 40 female-female.
  • Computers and smart phone maintainance, Various prototyping, such as Arduino/Maker/3D printer control board, DIY experiment needs frequently, If the terminals does not damaged it can be reused, if dam

Visit The Website For More Information…

SIM&NAT 12inch / 30cm 40 Pin Male to Female Dupont Wire, 40 Pin Male to Male, 40 Pin Female to Female Breadboard Jumper wire Ribbon Cables kit for Arduino Raspberry Pi 2 / 3 (120 PCS)


Features:
Material:Copper wire
The wires are easy to peel apart and great for making good looking prototypes
soft and flexible

Applications:
Work on a Raspberry pi breadboard projects, Raspberry pi robot build, Breadboard prototyping, Arduino and ky-040 rotary encoders.
Insert onto the SW LED pin on the typical desktop computer mother board.
Test bread boarding projects or for any breadboard experimenter.
Fit into a 3-pin JST.

Package Included:
1 * 11.8 inch 40 pin male to male Breadboard Jumper Wires
1 * 11.8 inch 40 pin female to female Breadboard Jumper Wires
1 * 11.8 inch 40 pin male to female Breadboard Jumper Wires

Product Features

  • Length: 30cm/11.8 inch
  • The pitch of each end of the wire is 0.1 inch (2.54mm)
  • 40 pin jumper Wire are easy to separate from the ribbon
  • Suitable for Arduino breadboard kit project, PCB project, PC motherboard, DIY experiment, 3D printer and etc.
  • Package content: 1 * 40 pin male to female jumper wires, 1 * 40 pin male to male cable and 1 * 40-pin female to female cable (total 120pcs)

Click Here If You Need More Detailed Info…

120pcs Multicolored Dupont Wire Kit 40pin Male to Female, 40pin Male to Male, 40pin Female to Female Breadboard Jumper Wires Ribbon Cables Kit for Arduino / DIY/ Raspberry Pi 2 3 (Pack of 120)

RexQualis Inc. is a professional manufacturer of electronic components products, involved in development, design, production and saleing of Arduino, Raspberry Pi, and other products.

Our aim is to provide clients with the highest cost performance products, to provide the best service, make science fun ,make science popular.

Although our products are few reviews till now, we actually sold few hundreds of a month.We sincerely hope that you can provide valuable opinions for our products and services, this is the power of prompted us to do better.

——————————————————–

The cables can be separated into single root as you request to do multiple connection.
The male ends meant for insertion into standard 0.1 quot;(2.54mm) female sockets,The female endsmeant for insertion into standard 0.1 quot;(2.54mm) male headers.
Dupont Wire can be very firmly and pin connection, without welding, you can quickly conduct circuit testing.
If the terminals does not damaged it can be reused, if damaged can also be used for soldering.

Package includes:
1PCS 40-pin male to female jumper wires
1PCS 40-pin male to male jumper wires
1PCS 40-pin female to female jumper wires

WARNING:
CHOKING HAZARD— Small parts. Not for children under 3 yrs.

Product Features

  • 0.127mm, 36 AWG/ single root, 20cm(7.87inch)/axis; Standard 2.54mm headers and sockets.
  • The Cables Can be Separated into Single Root as You Request.
  • Including 40 pin male to female jumper wires,40 pin male to male jumper wires, 40 pin female to female jumper wires.
  • 10 Different Colors, 120units copper cable in total, for making prototypes with arduino boards, stepper motor 3D printer etc, The combinations provide a jumper for whatever you need.
  • Dupont Wire can work with Arduino/ Rasperry Pi/ etc you definitely need,it’s great for connecting Arduino to breadboards

Detailed Information available on our Homepage…