RAMBo Adapter LCD12864 LCD2004 display connector adaptor for 3D printer controller board

RAMBo Adapter LCD12864 LCD2004 display connector adaptor for 3D printer controller board

Click Here For More Information

[Sintron] 3D Printer Kossel Mini Full Complete Kit + Auto level + Bowden hotend + MK8 Extruder + RAMPS 1.4 + LCD2004 + MEGA 2560 + A4988+NEMA17 Motor+Endstop+MK3 Heatbed for RepRap Rostock Delta

The operating principle of 3D printer is to establish a 3D model by your computer, and use slicing software system to do the slicing work for the 3D model then save to the SD card for ready to print.

After successfully launched Sintron first DIY 3D printer model Prusa i3. (http://www.amazon.com/dp/B00WMBFON8), this one is Sintron’s 2nd DIY kit : Kossel, This kit include all the parts you need for building Kossel Mini 3D printer. and as always, we will provide our professional advise if customer is not familiar with it, so you are not just buying the hardware, you also got our tech support for this kit !

The difference between this kit with others are : We provide MK3 heated bed, auto level probe function, MK8 extruder and excellent bowden hotend.

Sintron 3D printer Kossel Mini Demo : http://www.youtube.com/v/Jg1kncqn6PE

Sintron 3D printer Kossel Mini Auto Leveling : http://www.youtube.com/v/bRYlnEDt_QQ

Package list and Kossel Mini Specifications : please check the main picture for list.(Please notice : the filament on top is not included in this transaction)

Below are the details of parts, please read carefully, because there are many other sellers might sell you the bad and cheap quality, and cause you the whole system crash, wrong wiring is possible to burn all the parts , so please be careful while using it !

RAMPS 1.4- http://www.amazon.com/dp/B00JU41GQ4

Mega 2560- http://www.amazon.com/dp/B00E94CGTQ

LCD 2004- http://www.amazon.com/dp/B00K6KCYEE

A4988- http://www.amazon.com/dp/B00JXGT1G6

Kossel Extruder- http://www.amazon.com/dp/B011QCFGPO

Kossel Heatbed- http://www.amazon.com/dp/B011MWF3QU

Endstop- http://www.amazon.com/dp/B00OCFEZ1O

Product Features

  • (1) This kit include all the parts you need for building Kossel Mini 3D printer.
  • (2) Compared to 3D Printer Prusa i3 Model : easier to assemble, faster printing, print higher objects.
  • (3) This 3D printer has a simple structure, light and portable, beautiful and trendy. Especially suitable for DIY amateur, artistic design, architectural design, education, 3D photo studio, can be used for printing different items like small components model, decoration, etc.
  • (4) We have pre-install the 3D printer firmware for you . so even you know nothing about firmware , you can still get it working .
  • (5) We don’t just sell them, we also provide good after-sales service, so welcome to discuss with us, we will try to do technical support as much as we can, please feel free to send us an email, we will also help you to complete the project !

Click Here If You Need More Detailed Info…

[Sintron] 3D Printer Kossel Mini Full Complete Kit + Auto level + E3D Bowden hotend + MK8 Extruder + RAMPS 1.4 + LCD2004 + MEGA 2560 + A4988+NEMA17 Motor+Endstop+MK3 Heatbed for RepRap Rostock Delta

The operating principle of 3D printer is to establish a 3D model by your computer, and use slicing software system to do the slicing work for the 3D model then save to the SD card for ready to print.

After successfully launched Sintron first DIY 3D printer model Prusa i3. (http://www.amazon.co.uk/dp/B00WMC1RS8), this one is Sintron’s 2nd DIY kit : Kossel, This kit include all the parts you need for building Kossel Mini 3D printer. and as always, we will provide our professional advise if customer is not familiar with it, so you are not just buying the hardware, you also got our tech support for this kit !

The difference between this kit with others are : We provide MK3 heated bed, auto level probe function, MK8 extruder and excellent bowden hotend.

Sintron 3D printer Kossel Mini Demo : http://www.youtube.com/v/Jg1kncqn6PE

Sintron 3D printer Kossel Mini Auto Leveling : http://www.youtube.com/v/bRYlnEDt_QQ

Package list and Kossel Mini Specifications : please check the main picture for list.(Please notice : the filament on top is not included in this transaction)

Below are the details of parts, please read carefully, because there are many other sellers might sell you the bad and cheap quality, and cause you the whole system crash, wrong wiring is possible to burn all the parts , so please be careful while using it !

RAMPS 1.4- http://www.amazon.com/dp/B00JU41GQ4

Mega 2560- http://www.amazon.com/dp/B00E94CGTQ

LCD 2004- http://www.amazon.com/dp/B00K6KCYEE

A4988- http://www.amazon.com/dp/B00JXGT1G6

Kossel Extruder- http://www.amazon.com/dp/B011QCFGPO

Kossel Heatbed- http://www.amazon.com/dp/B011MWF3QU

Endstop- http://www.amazon.com/dp/B00OCFEZ1O

Product Features

  • (1) This kit include all the parts you need for building Kossel Mini 3D printer.
  • (2) Compared to 3D Printer Prusa i3 Model : easier to assemble, faster printing, print higher objects.
  • (3) This 3D printer has a simple structure, light and portable, beautiful and trendy. Especially suitable for DIY amateur, artistic design, architectural design, education, 3D photo studio, can be used for printing different items like small components model, decoration, etc.
  • (4) We have pre-install the 3D printer firmware for you . so even you know nothing about firmware , you can still get it working .
  • (5) We don’t just sell them, we also provide good after-sales service, so welcome to discuss with us, we will try to do technical support as much as we can, please feel free to send us an email, we will also help you to complete the project !

Click Here If You Need More Detailed Info…

[Sintron] Kossel Mini Electronic Full Kit for DIY RepRap Rostock Delta 3D Printer with E3D Bowden hotend + MK8 Extruder + RAMPS 1.4 + LCD2004 + MEGA 2560 + A4988 + NEMA 17 Motor + Endstop

This kit are included all the electronics parts you need for 3D printer Kossel Mini Rostock Delta (except power supply, which you can use PC ATX power), so after you purchase this kit, then can start your project right away, no need to worry about what might be missing again. The parts we selected are all with very good quality, also we provide support while you are building it, if you have questions, please feel free to send us an email, we will also help you to complete the project !

Below are the details of parts, please read carefully, because there are many other sellers might sell you the bad and cheap quality, and cause you the whole system crash, wrong wiring is possible to burn all the parts , so please be careful while using it ! (especially the bowden hot-end and extruder cold-end)

RAMPS 1.4- http://www.amazon.com/gp/product/B00JU41GQ4

Mega 2560- http://www.amazon.com/dp/B00E94CGTQ

LCD 2004- http://www.amazon.com/gp/product/B00K6KCYEE

A4988- http://www.amazon.com/gp/product/B00JXGT1G6

Kossel Extruder- http://www.amazon.com/dp/B011QCFGPO

Kossel Heatbed- http://www.amazon.com/dp/B011MWF3QU

Endstop- http://www.amazon.com/gp/product/B00OCFEZ1O

Package List :

(1) 1x 3D Printer Controller Ramps 1.4 Board

(2) 1x Arduino-Compatible Mega 2560 R3 + USB Cable

(3) 5x A4988 StepStick Stepper Motor Driver Module

(4) 1x LCD 2004 Smart Display Controller + Smart Adapter

(5) 1x All Metal MK8 Extruder & Bowden hotend + 40x40x10mm fan

(6) 3x NEMA 17 Motor

(7) 1x Round MK3 Heatbed + thermistor and wire

(8) 6x Mechanical Endstop + Cable

(9) 2x 30cm Ribbon Cable

(10) 1x 40pin Dupont cable 200mm Male to Female

(11) Filament (few for test)

Product Features

  • (1) We use well-designed Kossel MK8 extruder, high quality stepper motor and direct drive extrusion wheel, more accurate, quick heating and fluent injection, We have made necessary design, Printing speed up to 100mm/s.
  • (2) We use the latest MK3 Heatbed Round 3mm Aluminium PCB Board, dual power supply, operate at 12V or 24V. Heated bed keeps a certain temperature to prevent warping, and cooling fan speeds up solidification of the extruded filament. this would reduct your calibration time a lot !
  • (3) We offer LCD 2004 controller with SD card design support totally off-line print, no computer needed while printing. then you don’t have to spare one computer for your 3D printer use only.
  • (4) We have pre-install the 3D printer firmware for you . so even you know nothing about firmware , you can still get it working .
  • (5) We don’t just sell them, we also provide good after-sales service, so welcome to discuss with us, we will try to do technical support as much as we can, please feel free to send us an email, we will also help you to complete the project !

Click Here If You Need More Detailed Info…