This leveling screw spring kit is great for 3D printer.
Each kit consists of 1 piece M3*40mm screw, 1 piece leveling knob and 1 piece leveling spring.
Easy and convenient to use.
High quality and durable performance.
Material: Stainless Steel
Total Length: 40mm
Spring Length: 20mm
Nut Diameter: 10mm ; Inner Diameter: 2.5mm
5 Pieces Leveling Components M3 Screw Kits
Color maybe slightly different due to different monitor.
The above size is measured by hand, please allow slightly difference. Thanks !
- This leveling screw spring kit is great for 3D printer.
- Each kit consists of 1 piece M3*40mm screw, 1 piece leveling knob and 1 piece leveling spring.
- Easy and convenient to use.
- High quality and durable performance.
- Material: Stainless Steel
Auto Leveling Parameters Description:
X-axis direction offset: the offset of the leveling probe relative to the print nozzle in the X-axis direction
Y-axis direction offset: the offset of the leveling probe relative to the printing nozzle in the Y-axis direction
Z-axis direction offset: the distance from the platform to the print head when the leveling probe detects the platform
Probe stowed angle: the angle of the servo for the leveling probe when the probe is stowed/retracted/up (can ignore this when not in use)
Probe open angle: the angle of the servo for the leveling probe when the probe is
deployed/down (can ignore this when not in use)
Number of leveling points: The number of probe points that probe on the plane. The actual number of detected points is equal to the square of the set value. For example, if set to 4 points, 16 points are actually detected, and the maximum is 9, namely 81 points.
Probe trigger mode: Set the level state when the leveling probe is triggered.
1 x Auto-leveling module 1 x 1 meter signal line
Note: Do not use the leveling sensor when the nozzle temperature is higher than 45degrees!!!
- EASY TO BE USED:Easy to be used. Can be applied to different types of 3D printers. The default trigger distance is 0.1mm
- HIGH PRECISION:High precision, leveling repeatability can be ± 0.05mm
- THE AVERAGE SERVICE LIFE:The average service life of the module is more than 500,000 times
- COMPATIBLE :Compatible with almost all the 3D printer motherboards in the current market
- GOOD ANTI-INTERFERENCE ABILITY:Good anti-interference ability, will not be affected by the platform material, ambient light, ambient temperature and humidity, etc
Main functions and controls of BLTouch are same as usual auto bed leveling sensor, consists of RC servo and micro switch. Thus, BLTouch can be applied on almost every board. BLTouch fulfilled simple structure and high precision by using progressively designed solenoid and hall sensor, and aimed user convenience and enjoyable printing by adding many smart functions, self-test, alarm, alarm release, test mode for M119. – Simple BLTouch can be easily applied, since it has a small and simple structure. – Smart [Self-test]: The push pin is operated three times to test when the power is on [Alarm]: The LED light blinks if a problem found on a self-test or on an operation – High-precision BLTouch’s Standard Deviation in repeatability is around 0.005mm, at that precise. Includes 1 Meter extension cable set. No soldering required!
- BLTouch is an auto leveling sensor for 3D Printers based on open-source.
- Simple, Smart, High-precision.
- It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.
- This variation includes solder less extension cables. These plug into the original connections and extend them one meter.