LEVILUNA 16 Colors Remote Control Magnetic Levitating Moon Lamp, 7.1″/18cm Diameter, Unibody Seamless 3D Printing, PLA Material, Floating LED Decorative Table Lamp

LEVILUNA Magnetic Levitating Moon Lamp

NOTICE
Read the Instruction Carefully!
At First, It Would Be Pretty Difficult to Mount The Lamp Onto the Balance Point.
Keep Calm, Just Treat It As a Game.
If You Fail Many Times, Take A Break and Watch Our Guiding Video.
After A Few Successful Tries, You Will Be Practiced.Balance Point. It Is Not Suggested to Use Them.

Parameters:
Magnetic Force > 3N
Levitation Height : 8-12mm
Light Power : 1W
Suggested Working Temperature : 0 ~ 40°C
Suggested Working Humidity: 10%~90%RH
Base Material : ABS
Lamp Material : High Transmittance PLA Material
Average Shell Thickness : 3mm
Voltage : 100~240V to 15/12V
Power : 6W
Moon Weight : 360g
Base Weight : 600g

Product Features

  • 【Magnetic Levitating】 – 3 Years of Technical Research & 5 Times super Magnetism, to Enable The Moon to Hover&Rotate in the Air Stably.
  • 【Seamless Forming】 – a Unibody Moon Reproducing the Moon Surface Precisely by High-resolution 3D Printing.
  • 【Quality Guarantee】 Gurantee Refund or Replacement for Defective Lamps.

Check Out Our Website For Details…

Creality Ultra-Flexible Removable Magnetic 3D Printer Build Surface Heated Bed Cover for CR-10/CR-10S 3D Printer 310X310MM

NOTE:

1>This product is rated for use with PLA filaments ONLY. Any use with filaments with high shrinkage coefficients may experience malfunction or decrease in magnetic force over time. This will NOT prevent prints from warping.
2> This product is not for use with high-temperature printing applications above 70*C.

Easy removal 3D printing platform for PLA and PLA-based materials

How to use:

To use it, simply stick the bottom sheet onto your build plate place, then place the top half on top of the magnetic lower and start printing, peel up the top sheet with finished prints, then flex the top sheet to make the model pop off from the build surface. Snap the top plate back into place, and you’re ready for the next round of printing.

Size:300X300MM (12×12 Inches)

Fit for CR-10/CR-10S 3d printer

Color:black

Package included:
1*Magnetic 3d printer Build Surface .

Product Features

  • ALL NEW FUNCTIONALITY: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal. Say goodbye to all those removal tools, spatulas, and knives with this genius design
  • EASY MODEL REMOVAL: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands
  • CUSTOMIZABLE: The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.
  • SIMPLE INSTALLATION: Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate
  • UNIVERSAL: Works with all FDM printer models, and all heated and non-heated 3D printer beds.

Detailed Information available on our Homepage…

Window-pick Flex Magnetic Print Tape 235235mm/9.259.25in Tape Hot Bed Sticker Plat Backplane A-Side + B-Side Build Surface Tape for Creality DIY 3D Printer Accessories Ender-3

Description:

Size: about 235*235mm/9.25*9.25in

Advantage:

1. It can be used repeately for saving money.

2. Separation type bending to take the model. It’s more convenient.

3. Do not need the beauty of paper and scraper to assist the model.

4. Can be installed on a hot bed and a glass platform.

5. Print without warped edge. No glue is needed.

6. Can be printed on cold bed.

7. The A plate is flexible and magnetic, it is easy to move away from build platform and take away printed models.

8. The surface of A plate is able to resist high temperature to around 120 – 150 ℃ in short time.

9. The A B plates are flatness.

10. It can print a variety of materials such as PLA and so on.

Pay Attation:

* Please level the build plate well before printing.

* Please do not let heated nozzle touch the A plate directly !

The product includes two parts: Part A+Part B

Part A: The top is a matte surface (the same as other stickers), and the back is magnetic (the interaction with the front of Part B )

Part B: The top is magnetic (with the adsorption under the A part), the back is the adhesive (posted on the printer platform for fixing)

Product Features

  • It can be used repeately for saving money.Separation type bending to take the model. It’s more convenient.
  • Do not need the beauty of paper and scraper to assist the model.Can be installed on a hot bed and a glass platform.
  • Print without warped edge. No glue is needed.Can be printed on cold bed.
  • The A plate is flexible and magnetic, it is easy to move away from build platform and take away printed models. The surface of A plate is able to resist high temperature to around 120 – 150 ℃ in short time.
  • The A B plates are flatness.It can print a variety of materials such as PLA and so on.

Detailed Information available on our Homepage…

CactusAngui Magnetic Print Bed Square 200mm Flex Sticker Build Plate Tape 3D Printer Parts

Specifications:
It can be used again and again.
Separation type bending to take the model, convenient to use.
Can be installed on a hot bed and a glass platform.
Print not warped edge, no glue is needed.
This product consists of A plate + B plate sticker.
The A plate is flexible and magnetic, it is easy to move away from build platform and take away printed models.
The B plate has magnetic upper side and sticky back.

Type: Print Build Plate Tape
Material: Magnetic Print Bed Tape
Features: Magnetic, Easy to Use, 3D Printer Accessories
Size: 20cm x 20cm/7.87″ x 7.87″ (Approx.)

Notes:
Due to the light and screen setting difference, the item’s color may be slightly different from the pictures.
Please allow slight dimension difference due to different manual measurement.

Package Includes:
1 Set of Print Build Plate Tape(A Plate + B Plate Sticker)

Product Features

  • It can be used again and again.
  • Separation type bending to take the model, convenient to use.
  • Can be installed on a hot bed and a glass platform.
  • This product consists of A plate + B plate sticker.
  • The A plate is flexible and magnetic, it is easy to move away from build platform and take away printed models.

Visit The Website For More Information…