MakerHawk 4pcs TL-Smoother Plus Addon Module 3D Printer Accessories Filter for Pattern Elimination Motor Filter Clipping Filter 3D Pinter Motor Drivers Terminator Reprap MK8 I3

Description:
The TL-Smoother is an addon module for 3D printer stepper motor drivers. The board provides flyback diodes (freewheeling diodes) for the motor outputs, so that they are also protected against induction voltages in the unpowered state of the driver. You will got smoother movement especially on the delta-style 3D printer under DVR8825 stepper drivers or A4988/2 drivers.

Parameter:
Size: 48mm * 25.3mm * 7.6mm(1.89inch * 1inch * 0.29inch)
Weight: 0.02kg(0.04lb.)

Features:
1. 8 big Package(SMC)diodes provides better heat dissipation performance that can handle bigger motor than small diodes.
2. Lower vibration lower noise smoother result.
3. All the boards adopt a patch diode with a strong consistency, the signal is more stable and the service life is longer.
4. How to use: Connect this TL-Smoother Module to the motherboard’s corresponding drive socket and motor.
TL-Smoother assembly instructions: https://drive.google.com/open?id=1Kdq4FKcv4PRkuYbeoWxF_myPKDdfZud9XCIloQEaLqs

Package Including
4 * 3D Printer TL-Smoother
4 * DuPont Lines

Product Features

  • TL-Smoother assembly instructions: https://drive.google.com/open?id=1Kdq4FKcv4PRkuYbeoWxF_myPKDdfZud9XCIloQEaLqs
  • TL-Smoother can effectively eliminate the mechanical chatter generated by 3D printer motors, especially for parallel arm configurations of the machine effect is significant. Lower vibration lower noise smoother result.
  • The TL-Smoother is an addon module for 3D printer stepper motor drivers. The board provides flyback diodes (freewheeling diodes) for the motor outputs, so they are also protected against inductance voltages in the unpowered state of the driver.
  • You will get smoother movement especially on the delta-style 3D printer under DVR8825 stepper drivers or A4988 / 2 drivers. I3 and UM models can also be used, and different machines will have different clipping effects.
  • We have a strong After-sales Service Team: As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click “MakerHawk-US” and click “Ask a question” to email us! Looking forward to your consultation!

Detailed Information available on our Homepage…

MakerHawk 20 Sets Anti-Vibration Rubber Landing Mat Feet, T Sliding Nut Block Square Nuts, M3 Screws with 1pc Wrench 3D Printer Accessories for 2020 Aluminum Extrusion Profile

20 Sets Anti-vibration Rubber Landing Mat Feet, T Sliding Nut Block Square Nuts, M3 Screws with 1pc Wrench 3D Printer Accessories for 2020 Aluminum Extrusion Profile

Specification:
Colour: Black
material: Rubber
Function: Anti-vibration, Anti-friction to protect the printer(when the printer is in direct contact with the desktop or the ground, it will be weared out.)
Quantity: 20 sets

T Nut M3:
Material: Metal
Used for T slot 2020 aluminum extrusions
3D printer hardware accessories
Size: 10 * 10 * 5mm, Slot Width: 6mm; Thread Diameter: 3mm (m3)

How to install:
1.If you use in the 3D printer, which need the 4x Anti-vibration feet
2.Turn the YZ frame on the side and insert the antivibration foot inclined, then rotate the foot until you squish the rim inside the extrusion.
3.Repeat this process on all 4 feet. Place them 2-3 cm from the end of each extrusion.

Package Including
20 * Antivibration feet
20 * 2020 T Sliding Nut Block Square nuts M3
20 * M3 screws
1 * Wrench

Product Features

  • High Quality! Made of rubber, strong and durable, long service life.
  • Function: Shockproof, Anti-friction, to protect the printer.
  • Used for T slot 2020 aluminum extrusions, 3D printer hardware accessories.
  • .Package Contents: 20pcs anti-vibration feet, 20pcs 2020 T Sliding Nut Block Square nuts M3, 20pcs M3 screws, and a wrench as a gift for you.
  • Strong After-sales Service Team: As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click “MakerHawk-US” and click “Ask a question” to email us! Looking forward to your consultation!

Detailed Information available on our Homepage…