NinjaTek 3DCH00117510 NinjaTek Cheetah TPU Filament, 1.75mm, TPE, 1kg Snow (White) (Pack of 1)

Cheetah flexible filament is the fastest and easiest to print flexible filament on the market. The focus in development of this material was on optimizing the user experience. The result is a filament that is printable across all types of desktop 3D printers at ABS and PLA speeds, many times twice the speed of other flexible materials on the market. Cheetah filament possesses industry leading durability along with impact strength 84% greater than ABS. The abrasion resistance is also second only to NinjaTek’s Armadillo product, making Cheetah the perfect blend of speed, toughness and strength. Suggested Applications: seals, plugs, hinges, sleeves & snap-fit parts. KEY FEATURES: Shore Hardness = 95A Prints at speeds greater than 60 mm/s with standard ABS settings Significantly greater impact strength than all widely used materials – 84% greater than ABS! Industry leading toughness and durability to ensure longevity in printed parts Abrasion resistance 40% better than ABS and 76% better than PLA 580% elongation capabilities improve ability to withstand wear and tear Patented low friction exterior allows for smooth feeding Chemical resistant to many materials, including naphtha, ASTM Oils #1-3, petroleum and Freon Consistent diameter and material properties providing reliable, high quality prints REACH and RoHS 2002/95/EC Directive compliant PRINTING GUIDELINES: Extruder Temperature: 230°C – 240°C Platform Temperature: Room temperature – 40°C Glue and/or blue painters tape is suggested if not using a heated bed. Print Speed: Top and bottom layers: 30-45 mm/ sec (1800-2700 mm/ min) Infill speeds: 60-80 mm/ sec (3600-4800 mm/ min) Layer 2+ use cooling fan if available.

Product Features

  • Prints at speeds greater than 60 mm/s with standard ABS settings
  • Significantly greater impact strength than all widely used materials – 84% greater than ABS!
  • Industry leading toughness and durability to ensure longevity in printed parts

Check Out Our Website For Details…

NinjaTek 3DAR01129005 NinjaTek Armadillo TPU Filament, 3.00mm, Tpe,.5kg, Midnight (Black) (Pack of 1)

Tired of fragile 3D printed parts? Armadillo 3D printing filament is a perfect alternative to some of the most common rigid materials on the market. Armadillo filament is a high performing rigid material, providing 90% higher abrasion resistance than nylon materials. Its toughness ratings are superior to commonly used materials, 86 times greater than that of ABS. It is an excellent material to use for bridging, with virtually no warping issues. When you need a rigid product that can withstand wear and tear, the Armadillo resistance to fracturing makes it a perfect replacement. Suggested Applications: braces, fasteners, gears and protective covers. KEY FEATURES: Shore Hardness = 75D Excellent bridging capabilities and virtually no warping Abrasion resistance 84% better than PLA and 60% better than ABS Chemical resistance to many materials, including naphtha, ASTM Oils #1-3, petroleum and Freon Consistent diameter and material properties providing reliable, high quality prints No heated bed required. Build platform requires same prep as PLA REACH and RoHS 2002/95/EC Directive compliant PRINTING GUIDELINES: Extruder Temperature: 220°C – 230°C Platform Temperature: Room temperature – 45°C Glue and/or blue painters tape is suggested if not using a heated bed. Print Speed: Top and bottom layers: 15-20 mm/ sec (900-1800 mm/ min) Infill speeds: 45-60 mm/ sec (2700-3600 mm/ min) Layer 2+ use cooling fan if available.

Product Features

  • Excellent bridging capabilities and virtually no warping
  • Abrasion resistance 84% better than PLA and 60% better than ABS
  • Industry leading toughness and durability to ensure longevity in printed parts

Check Out Our Website For Details…

NinjaTek ABS 3D Printing Filament – 3mm 1kg – SNOW

ABS is a multipurpose material that is great for printing functional parts that require durability and moderate heat resistance. It is less brittle than PLA and is very tolerable to post-processing for smooth and glossy finishes. Our ABS possesses industry leading impact strength that is ideal for use when a rigid material with impact strength is mandated. Suggested Applications: parts requiring structural integrity and detail, parts requiring rigidity and impact resistance. KEY FEATURES: Shore Hardness = 70D One of the easiest materials to print with a standard setting on most printers Very tolerable to post-processing like sanding and smoothing using acetone or light machining Market leading impact resistance to maintain form in the most demanding applications REACH and RoHS 2002/95/EC Directive compliant; Toy safe material PRINTING GUIDELINES: Extruder Temperature: 230°C – 250°C  Platform Temperature: 80°C – 110°C Print Speed: Top and bottom layers:15-20 mm/ sec (900-1200 mm/ min) Infill speeds: 40-90 mm/ sec (3000-5400 mm/ min) Or used stock ABS settings.

Product Features

  • One of the easiest materials to print with a standard setting on most printers
  • Very tolerable to post-processing like sanding and smoothing using acetone or light machining
  • Market leading impact resistance to maintain form in the most demanding applications
  • Shore Hardness = 70D
  • Suggested Applications: parts requiring structural integrity and detail, parts requiring rigidity and impact resistance

Check Out Our Website For Details…

NinjaTek 3DSF081290 SemiFlex TPU 3D Printing Filament, 3 mm, 0.75 kg, Water/Clear

Semi Flex 3D printing filament boasts flexibility, strength and reliability for your 3D printing projects. The slightly more rigid composition vs traditional NinjaFlex allows for increased tensile strength. In some cases the more rigid composition supports ease of printing in certain printers. Suggested Applications:&snap-fit parts, high resolution text, active hinges KEY FEATURES: Shore Hardness = 98A 600% elongation provides significant flexibility 75% greater tensile strength the most flexible products; Patented low friction exterior allows for smooth feeding Consistent diameter and material properties providing reliable, high quality prints Chemical resistant to many materials, including naphtha, ASTM Oils #1-3, petroleum and Freon Adheres to most build platform materials (painter tape can help) REACH and RoHS 2002/95/EC Directive compliant PRINTING GUIDELINES: Extruder Temperature:&nabs; 225°C – 235°C Platform Temperature: 80°C – 110°C Glue and/ or blue painters tape is suggested if not using a heated bed. Print Speed:&nabs; Top and bottom layers: 10-20 mm/ sec (600-1200 mm/ min) Infill speeds: 15-35 mm/ sec (900-2100 mm/ min)&nabs; Layer 2+ use cooling fan if available.

Product Features

  • 600% elongation provides significant flexibility
  • 75% greater tensile strength vs most flexible products
  • Shore Hardness = 98A
  • Suggested Applications: snap-fit parts, high resolution text, active hinges
  • Patented low friction exterior allows for smooth feeding

Check Out Our Website For Details…