BASSTOP Portable Dock Replacement Case for Nintendo Switch (Only The case, You Have to DIY with The Circuit Board chip from The Original Dock) (White)

Specially designed case to replace your original Nintendo switch dock.
Compared with the original switch dock, this replacement case is smaller, more lightweight that you can just put it into your pocket and carry it anywhere you want. You just need to scan the QR code labeled on the package and follow the video guidance to install it, and you will get the mini version switch dock which keeps all the functions of the original one. With the given screwdrivers and screws, you can finish the installation quickly

What you get:
1* Replacement case for Nintendo switch dock
2* screwdrivers
7* large screws
2* small screws

Product Features

  • Specially designed case to replace your original Nintendo switch dock ( you have to take out the circuit board chip from the original Nintendo dock and install it to this replacement case).
  • Precise cutout and more portable, the size of this replacement case is 3.78*2.69*1.15inch,you can put it in your pocket and take it anywhere.
  • Easy to install: Just scan the QR code labeled on the package and take out the circuit board chip from your original Nintendo switch dock and install it to this replacement case. You can DIY easily with our video guidance.
  • You can have a lot of fun by DIY your mini version Nintendo switch dock with this anti-scratch replacement case.
  • What you get: 1*switch dock replacement case, 2*screwdrivers and 9 screws, 12 Month 100% Satisfaction Guarantee and 24 Hour dedicated email support.

Click Here If You Need More Detailed Info…

Genuine E3D V6 All-Metal HotEnd 1.75mm Universal Direct Drive Metal Only (V6-175-MO)

Print the Widest Possible Range of Materials The signature all-metal design allows you to reliably print high temperature materials, and it has added extra functionality with soft and flexible filaments. This opens up a huge range of new opportunities for your printer. High Temperature Performance The V6 can comfortably reach 300°C. By swapping a thermistor for a thermocouple (may require additional electronics) or PT100 you can reach over 400°C. This not only allows you to print extremely high temperature materials like Polycarbonate and Nylons but also eliminates HotEnd meltdown failures associated with PEEK/PTFE designs. The PTFE filament guide inside the V6 HotEnd is never subjected to high temperatures, so there is no risk of damage through overheating. Compact E3D focussed on cutting as much bulk from the E3D V6 as possible. This means an overall length of just 62mm, and low bulk in X/Y dimensions! Easy to Use The new thermistor cartridge simply slides into place and is secured with a single screw. High temperature glass is used in the sleeving to insulate the thermistor legs as well. This makes installing or removing the thermistor a quick and clean process compared to previous methods involving fiddly taping. High Quality Printing E3D kept the sharp thermal transition that gives the high quality printing performance users have come to expect from E3D HotEnds. A sharp thermal break gives better control over filament output so you get more immediate start and stops when extruding as well as retracts that are more effective in combating ooze. This means sharper, more accurate prints that have less stringing, oozing or blobbing. Adaptable The V6 is a fully-integrated part of the E3D Ecosystem. E3D’s nozzles and blocks give more opportunity to choose how to print.

Product Features

  • Genuine E3D Parts
  • The E3D V6 Hot End: Smaller, Easier, High Performance
  • High Temperature Performance
  • Low bulk in X/Y dimensions

Visit The Website For More Information…

RepRap Champion Metal Only Parts for J-head V6 Hotend 1.75 / 0.4mm 3D Printer Direct or Bowden

Universal version – use it for both: direct and bowden feed, comes with 1 meter PTFE tube 4mm OD 2mm ID.

Quality replica of V6 hotend, uses embedded fitting same as original. Hotend can be used for both: direct feed and bowden applications. For direct feed you will have to cut PTFE tube to necessary length, no other changes are necessary. See E3D wiki for setting up hotend for direct feed.

V6 Hotend specs:

Filament size: 1.75mm
Nozzle diameter: 0.4mm
Capable to print any 3D Printer plastic filament – Nylon, Carbon fiber ABS, Ninjaflex, ABS, PLA etc
Works for both: direct feed and bowden configurations

Package contents:

1 x All Metal Universal V6 hotend pre-asssembled 1.75mm Filament / 0.4mm Nozzle 1 x PTFE tubing 4mm OD 2mm ID, 1 meter long

Product Features

  • Perfect quality,NOT a China V6 cone.
  • True copy of the original V6 with same performance and even better CNC finish quaity
  • Properly machined heatbreak with smooth-polished inside bore
  • No more JAM !

Visit The Website For More Information…

Electron 3D Slimbot DIY Kit Now For Only $225

This very affordable entry model by Electron has a sturdy aluminium frame and comes with an LCD screen and heated bed. The 3D printer is a complete DIY kit (unassembled), everything is included to assemble this kit and designed to be easily assembled. The Electron 3D Slimbot is based on the Prusa i3 model, which is one of the most popular open-source printers ever made. Electron promises their version is easier to assemble and has high performance.

You can now profit from the Chinese new year special sale at 3DPrintersonlinestore.com. The 3D printer will cost you $225 USD, this includes free shipping. Other freebees that are included are: 2 metres of filaments, an 8G SD Card, a USB bundle and the necessary assembly tools. A warranty of 18 months is also included.

electron1

For an extra $50 USD you can add Automatic Platform Leveling along with Automatic Platform Height Detection. The auto-leveling version uses a proximity sensor to detect the aluminum print bed where the normal version of the printer uses a micro-switch to detect the end of travel for the Z-Axis movement (vertical limits).

While this kit is easy to assemble you do need a little understanding of electrical wiring and have a healthy respect for electricity. You need to understand and use proper wiring and mechanical assembly techniques with this kit.

electron2

Other Highlighted Features:

  • Resolution of 50 microns.
  • MAX Printing Speed: 150 mm/s.
  • Build size: 200X 200 X 200mm. A Large print area of 200 x 280 x 200 mm is optional.
  • Full Metal E3D Bowden long distance Extruder.
  • Material type: PLA, ABS, PETG, Wood, PVA and Flexible Filaments (With Pro Metal Extruder).
  • XY Axis Positioning Accuracy: 0.012mm
  • Z Axis Positioning Accuracy: 0.004mm
  • Print Precision: 0.1-0.4mm
  • Layer Resolution: 50 to 100 Microns

electron3

For more information about the Electron 3D Slimbot you can visit 3DPrintersonlinestore.com. This video takes you through assembling process of the Slimbot step by step.