Buy in bulk and save! Repkord V-LINE+ (PLUS) is the latest enhancement of our value line in a continual effort to get you the best quality for the lowest cost! New improved formulation offers superior prints and better resilience to drying out. Spooled on a high impact clear ABS spool for a difference you can really see! In addition, this new line of spool is compatible with the stock spool mounts on the latest versions of the Makerbot Mini, Replicator Gen 5 and the Replicator +. MiniMaker Packs are a perfect way to get a variety of color as at an affordable cost. PLA is a great choice for everyday 3D printing projects. It’s ideal filament for printers that don’t have a heated bed due since it’s not subject to warping the way ABS can. Get quality prints at an affordable cost. MiniMaker spools are great for 3D Pens too! Vacuum sealed with desiccant in a resealable bag to keep your filament dry when it’s not in use.
- PLA (Polylactic Acid) 3D printer filament vacuum sealed in re-sealable bag with desiccant
- Bulk value 3 pack of 250g / 1/2 LB Spools in Red, Green & Blue, roughly 250ft of filament per spool
- 1.75mm filament diameter +/- .05mm tolerance
- Extrusion temperature: 190c-210c
- Spool dimensions: 6″ diameter, 1.5″ traverse, 2″ arbor hole, 3.5″ barrel
Click Here For More Information
•Brand Name:Creality 3D
•Model Number:Limit Switch
3 PCS * Limit Switch
- Compatible with all Creality 3D Printer
- Number of Pins: 3
- 3D Printer Accessories Limit Switch 3Pin N/O N/C control easy to use Micro Switch
- 100% Creality Original
- Package Included: 3 PCS * Limit Switch
Visit The Website For More Information…
● Cartridge heaters is consist of a cylindrical stainless steel tube and thus provide a high corrosion prevention
● The heating wire inside which is wound onto a ceramic core
● The number of coils varies depending on the power, and provide a great uniform distribution of heat, which considerably increases the long life of the heater as well as prevents the oxidation of the heater wire even at high temperatures
● The solids, liquids, and gases need to be heated by cartridge heater, transmit heat quickly by conduction if the producer of the heat (the cartridge) is in direct contact with the heat sink (any solid, liquid, or gas)
Cartridge Heater Application:
● Widely used for manufacturing plastic and rubber parts in the car industry or in the food processing industry, etc
● Semiconductor chamber heating, semiconductor wafer lead connection, semiconductor wire and die bonding
● Freeze protection and deicing of equipment in cold climates or applications ● Humidity Control
● Patient Comfort heating used in medical devices
● Mold die and platen heating
● Seal bars used in packaging equipment
● Test sample heating in gas chromatography
● For 3D printers: use TEMP_SENSOR 11 in Marlin firmware
● Small Size: 1.25mmx2.0mm glass bead
● High accuracy: ±1%
● Resistance value at 25°C=100K
● Wiring insulation: high temperature teflon/PTFE
● Wiring length: 1 meter
● Operating temperature range: -40 ° C … + 300 ° C
● Dissipation power factor: ≥ 5MW / ° C (static air)
● Rated power: 45MW
● Thermal time constant ≤ 7S (static air)
● Temperature Coefficient of Resistance; -2-5% / ° C
5x 12V Cartridge Heater with 1.0m Wire
5x NTC Thermistor 3950 100k
1x Allen Wrench
- Cartridge Heater Material: 304 Stainless Steel, Voltage: 12V, Power: 40W. Conveniently pre-wired with 1 meter long high temperature Teflon insulated wiring
- Thermistor Color: White, support for NTC 3950 is included in Marlin firmware, use TEMP_SENSOR 11 in firmware configuration. Temperature sensor 100KΩ accuracy of ± 1%
- The number of coils varies depending on the power, and provide a great uniform distribution of heat, which considerably increases the long life of the heater as well as prevents the oxidation of the heater wire even at high temperatures .
- Cartridge heater is consist of a cylindrical stainless steel tube and thus provide a high corrosion prevention.
- CHPOWER is a TRUSTED VENDOR, we provide 12-month manufacturer warranty on all parts. Buy with confidence.
Detailed Information available on our Homepage…
Size: 6 x 5 x 3.1cm / 2.36 x 1.97 x 1.22″
Mounting holes: 3.2mm diameter, for M3 screws
Max Current: 25A (Enhance heat dissipation), safe for prolonged times. ensure active cooling of the heatsink.
This module is based on power MOSFET and will allow PID control of the heated bed (DC-DC Relays usually do not allow this).
This module under the premise of normal cooling, found at I (Max) = 25A stable work situation, the process of using the current not exceed 25A.
2 Set x Heated Bed Power Expansion Module Kit
TopDirect Customer Service Team is dedicated to offer our valued customers a great and professional services – Timely email reply, Helpful solutions, Refund & Return Warranty.
All TopDirect products provide 30 days money-back guarantee & 12-month warranty. Any questions, please don’t hesitate to contact us. We will reply you within 24 hours.
- Application: This high power module is a general add-on heated bed power expansion module for 3D printer. It can work with the Anet A8.
- Motherboard: The heat bed power module can be used in both Chitu motherboard and other open 3D printer motherboards.
- 25A MAX Current: This high power module helps your 3D printer equipped with the Chitu controller board (capable of max 15A) become even more powerful. With this add-on module to board lead the maximum current up to 25A.
- Good Protection: When using heated bed 3D printer for 12V power supply which may cause excessive current during times, with this module, it can well protect the connectors on the controller board from burning.
- Package: 2 Set x Heated Bed Power Expansion Module Kit (motherboard is not included).
Detailed Information available on our Homepage…