AmazonBasics PETG 3D Printer Filament, 2.85mm, White 1 kg Spool

An Amazon Brand.

Product Features

  • 3D printer filament with 2.85mm diameter + / – .05mm; designed to fit most common 3D printers (check spool size for compatibility); White; 1 kg spool
  • Made of PETG plastic, known for its ease of use (like PLA) and durable strength (like ABS); no heating bed needed; offers easy bed adhesion, stiffness, and a glossy finish
  • Spool’s built-in gauge shows percentage of material remaining and approximate length remaining
  • Engineered to reduce jamming; resealable storage bag included to protect filament between use
  • Measures 9.2 by 8.3 by 3 inches (LxWxH); weighs 2.2 pounds; backed by an AmazonBasics 1-year limited warranty

Click Here For More Information

PETG 1.75mm 3D Printer Filament, Dimensional Accuracy +/- 0.02mm, 2.2 LBS (1KG) Spool,1.75 mm PETG 3D Filament for Most 3D Printer & 3D Printing Pen (US-PETG+Black-Grey)

SUNLU PETG 3D Printer Filament is especially designed and developed for most 3D printer on the market today.

Click Here For More Information

3D Printer Adhesive Glue by Layerneer, Bed Weld Original, Strong Grip Reduces Warping for ABS, PLA, and PETG Filament on Heated Build Plates, 4 oz.

Do you have trouble with parts warping or coming detached from the printer bed?

Have you struggled with part removal after printing is finished?

Introducing BED WELD – ORIGINAL™

BED WELD was engineered to solve these challenges by enhancing your print surface so that it grabs hold of that critical first layer when your build surface is hot, and refuses to let go with its gecko like grip. In many cases you can often print without rafts or build plate adhesion layers, saving you time and material.

Once your part is finished the coating dynamically morphs as your printer bed cools, releasing its hold so you don’t have to wrestle to get your part off.

No more chipped glass or broken parts. In most cases, your part will fully detach without the need for tools. In the event the part does remain attached it normally takes just a simple lifting of a corner using the edge of a razor as a lever, and the part easily pops off.

BED WELD comes with a unique built-in applicator that makes applying the coating a simple no mess process. The coating dries quickly to form a thin film that is not sticky, so there is no risk of getting a clogged nozzle or having residue on your finished part.

NOTE: The BED WELD coating was designed for use with heated build plates made from glass or aluminum and was optimized to work with PLA, ABS, PETG, PVA, and CPE filament types. Not recommended for use with Nylon, PP, or TPU 95A. See image for compatibility summary. Applying to build plates that have other surface coatings, such as magnetic build plates, or tape, is not recommended.

BED WELD is backed by an unconditional 90-Day money back manufacturers guarantee, so you risk nothing!

Product Features

  • THERMAL DYNAMIC COATING – No magic, just science; Parts stick at hot and release when cooled; Dries fast and non tacky so it won’t clog your nozzle with goo
  • LONG LASTING – Print several times on a single coat; recharge with a wet sponge to get more prints out of a single application; Cost pennies per print
  • LOW ODOR & WATER SOLUBLE – No harsh smells; No headaches; Easy to touch up or remove with water
  • NO-MESS APPLICATOR – Built in foam tip makes applying the coating to your build plate surface simple and it won’t accidentally spill
  • 90-DAY MANUFACTURER GUARANTEE – If this solution does not work for your 3D printing application, you have a FULL 3 MONTHS to contact us for a 100% money-back refund

Detailed Information available on our Homepage…

3D Printer Filament Clear PETG,1.75 mm,2.2LBS(1KG) Spool,3D Printing Filament Dimensional Accuracy +/- 0.02 mm,3D Printing Filament PETG Transparent

3D Printer Filament- PETG 1.75 mm Clear Filament,1KG(2.2lbs) Spool,Dimensional Accuracy +/- 0.02 mm,No Tangledncy


✮✮✮ Filament Features ✮✮✮

Material: PETG Printer Filament

Color:Transparent

Net Weight: 1KG

Diameter: 1.75mm PETG Filament (Dimensional Accuracy +/- 0.02mm)

Recommended Extrusion/Nozzle Temperature : 230°C – 250°C (446°F – 482°F )

✓100% WORRY-FREE SATISFACTION GUARANTEED

100% worry-free satisfaction guaranteed offered to let you buy with confidence; no questions asked.

So, why think twice?


ORDER NOW ➤ Get this Incredible PETG filament 1Kg Spool for 3D printers ➤ Delivery in Just 3-5 Days!

Product Features

  • ◆【Non Toxic & Low Odor】Environment friendly PETG Filament, Ideal materials for indoor printing
  • ◆【 Printing Filament】100% pure raw material, No impurities cause Clogging,Extremely high successful rate
  • ◆【High Transparency】Good glossy surface,excellent flexibility,Good liquidity (flows smoothly),high impact strength
  • ◆【High Compatibility】Compatible with 3D Printers and 3D Pens that use 1.75MM filament,Such as:Prusa,Makerbot,etc
  • ◆【Warranty & Service】One year warranty,Any quality problems about our 3D Printer Filament, we will replace for you.

Check Out Our Website For Details…