Frankensbox fx-800 3D Printer, Wi-Fi, Compact, Quiet, Accurate, Plug and Play Simplicity, (Black)

Frankensbox: What will you CREATE 

Will it be beautiful? Will it be ugly? 

Creativity is not about perfection, it’s about imagination. Frankensbox connects your imagination to reality. 

Beautiful or ugly, it’s your creation!

Create now

As great as 3D printing is, getting started can be understandably a bit daunting. So who wants their initial out of box experience to involve hours of assembling dozens of parts (and hoping their untested machine actually works), then more time and tweaking for setup and calibration? 

We don’t either. We like to think, “plug in, install the app, then you’re off to the races,” is the way things are supposed to work these days.

Be better

3D printer companies talk about the speeds their printers can achieve, usually in terms of mm/sec. The reality is that reasonably large and high-quality pieces can take hours.

If your project is going to take hours, your printer better be quiet. And any noise it does make better be soft and pleasant. 

It better be compact enough not to take over your work area. And have a design that isn’t an eyesore.

It better be fully enclosed to keep out dirt and paws and small fingers. It better be smart enough to auto-pause when the door is opened. And to auto-resume after the door is closed again. Or after power is restored, were it ever to go out.

Also in the box

Spool of filament, SD card, SD card adapter, USB cable, power cable, spatula, hex wrenches , Quick Start Guide.

Featuring

Print Material: PLA ABS Wood PC PVC

One Button Leveling

One Button Printing

Wi-Fi Connection

Ultra Quiet (< 50dB)

Removable Platform

No Platform Heat Needed

Print Size: 150 x 150 x 175 mm

Print Resolution: 0.1 mm

Nozzle Temp: to 250º C

Print Speed: to 150 mm/s

Product Features

  • Easiest to Start, Easiest to Operate: Unpack, plug in, load the app and go!
  • Safe, Clean, Quiet, Compact: Great for the home, office, or classroom
  • Wi-Fi, USB, SD Card Slot: Print from iOS & Android devices, PC, Mac or included SD card
  • Excellent Print Quality: Smooth, accurate, high resolution
  • 1-Year Warranty with USA-Based Support

Click Here For More Information

Dlion 5V UPS Smart Power Monitoring Module Continued to Play Printing Automatically Put Off Management Module for 3D Printer Part

Features:
1. Short press to start the power, long press to force the shutdown. Programmable software shutdown.
2. Power failure detection. On-board EMI circuit hardware filtering, effectively preventing false triggering power-off signals caused by power supply fluctuations.
3. Comes with 5V UPS power supply, 2200mAh, integrated UPS backup battery management system.
4. Programmable calling self-start function.
5. The module uses full optocoupler isolation technology. Provide a safe and stable UPS backup power supply.
6. Support more power switching power supply.
Dlion intelligent power management module can realize the functions of accidental power failure, print shutdown, software control power off, monitor power status, etc., realize the printing interaction, can effectively solve the accidental power outage during printing, go out, print overnight, printing failures that occur under unexpected conditions, it is considered to be a more useful feature of 3D printers.
About the UPS function description of this module: In case of accidental power failure, the Dlion intelligent power supply module provides the power-off signal to the 3D printing system and provides a stable 5V backup power supply to ensure that the 3D printing system can completely save the data of the power-off instant.
Package Included:

1x Dlion Smart Power Management Module
1x Self-resetting metal push button switch (with 30cm cable)
1x 3pin output signal cable(300mm)
1x 2pin UPS power cable(300mm)
1x 16340 battery

Notes:
Under normal using situation, the following areas are with high voltage power supply, please do not touch them directly and do insulation isolation:

Visit The Website For More Information…

3D printer play Aurora Labs soars to new heights

Shares in Aurora Labs soared to fresh dizzying heights this morning after the company announced yesterday it was in advanced negotiations with a major engineering and project delivery company to sell and distribute its 3D metal printers.

Aurora said it was working on a non-binding terms sheet with the company but the details remained “commercial-in-confidence” and the proposal remained incomplete.

The company said it had been in discussions with several of Australia’s biggest mining and resources companies concerning the supply of 3D metal printers to enable them to print spare parts at their mine sites or in a centralised 3D printing facility.

Aurora Labs managing director David Budge. Picture: Steve Ferrier/The West Australian.

Aurora is looking to team up with a bigger partner with the resources, networks and specialised engineering and technical know-how to market its products to resources companies on a large scale.

RELATED ARTICLE:
$5m to $60m in three months: Perth’s 3-D multi-millionaire

Aurora has two offerings, a small-format metal printer for the retail market and a large format industrial grade metal printer for manufacturing. It claims its printers are up to 100 times faster than those currently on the market, and can be built and operate at a much lower cost.

The company also yesterday released its response to a share price query from the ASX last week when its shares jumped from $2 to $2.45 before the stock entered a trading halt.

A metal part made by one of Aurora Labs’ 3D printers.

Aurora Labs were up 97 cents, or 32.55 per cent, to $3.95 at 8.45am after soaring to an intraday peak of $5.39. The share price give it a market capitalisation of about $215 million.

Aurora Labs listed in August last year at an issue price of just 20 cents.

Its shares were worth a little more than $1 less than a month ago.

The West Australian

Printrbot Printrbot Play 1505 – White Assembled 3D Printer, White

The Printrbot Play (Model 1505) fully assembled 3D fused-filament-fabrication printer with metal frame has an open platform for fabricating parts up to 4 x 4 x 5 inches (W x D x H) using 1.75-mm PLA filament (sold separately). The print head moves on the X (left to right) axis and Z (up and down) axes, while the bed moves on the Y (backward and forward). The print bed is a metal plate and includes an auto-leveling probe that works with the user-chosen computer software to provide a level print surface. The printer uses open source software and connects to the computer using the included micro-USB cable. Using a micro-SD card (sold separately), the printer can be disconnected from the computer after initialization for untethered printing. Maximum resolution of 100 microns. The printer includes a sample of filament.

Product Features

  • Metal construction for rigidity and consistent print results
  • Fan shroud and extruder cover to prevent children from touching the hot end
  • 4″ x 4″ x 5″ build volume

Click Here For More Information